Rallonge 3m pour sonde 4 broches - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 21%

Garmin

010-11617-10

Extensie 3m pentru sondă 4 pini

Cette rallonge Garmin de 3m est conçue pour étendre la portée des sondes 4 broches vers les appareils sonar compatibles. Elle assure une connectivité fiable avec les séries echo™, echoMAP™ et STRIKER™, offrant une flexibilité accrue pour l'installation du transducteur. Le produit inclut la rallonge de 3m.

Prix publicBénéficier du tarif pro

31,25€

31,25€ ~~40,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Număr de conductori	4.0
Culoare	Noir
Tensiune maximă	30.0
Ecranare	Blindé
Flexibilitate	Flexible
Tip curent	DC
Curent nominal	3.0
Material conductor	Cuivre étamé
Certificări	CE
Finisaj conductor	Étamé
Tip cablu	Câble de commande
Lungimea cablului	3.0
Rețea compatibilă	Connexion directe sondeur
Conectoare pre-montate	Oui
Amplasament instalare	À bord du bateau
Aplicație cablu	Extension de sonde
Temperatură de funcționare	-20°C à +80°C
Temperatură depozitare	-20°C à +85°C
Rază de curbură minimă	30 mm
Tip de conector	4 broches mâle/femelle
Tip ecranare	Tresse
Rezistență UV	Bonne
Cable Jacket Water Resistance	Étanche
Cable Length Imperial	10
Afișaje compatibile	Séries Garmin echo™, echoMAP™ (incluant Plus/UHD/UHD2), et STRIKER™ (incluant Plus/Vivid)
Connector Count	2
Material conector	Plastique marin
Indice IP	IPX7
Nominal Operating Voltage	12
Tipul produsului	Rallonge de sonde
Transducer Connector Pin Count	4

Description détaillée

Concepută pentru profesioniști și navigatori care solicită flexibilitate maximă în instalare, extensia de 3m pentru sondă 4 pini Garmin (010-11617-10) permite extinderea gamei de conectare a sondei dvs. compatibile către unitatea sonar Garmin. Cu o lungime de 3 metri (10 picioare), acest cablu oferă opțiuni extinse de amplasare pentru traductor, chiar și pe ambarcațiuni unde poziția ideală a sondei este îndepărtată de ecranul multifuncțional.

Compatibilitate și Funcționalitate

Această extensie este specific concepută pentru sondele și dispozitivele echipate cu un conector 4 pini. Este compatibilă cu o gamă largă de sonde și plottere Garmin, incluzând seriile populare precum Garmin echo™ (de exemplu, echo™ 100, 150, 200, 300c, 500c, 550c), echoMAP™ (cum ar fi echoMAP™ 43dv, 44dv, 45dv, 53dv, 54dv, precum și seriile ECHOMAP™ Plus/UHD/UHD2), precum și seriile STRIKER™ (STRIKER™, STRIKER™ Plus, STRIKER™ Vivid 4, 5, 7). Este de asemenea compatibilă cu sonda GT-20 cu 4 pini. Spre deosebire de unitățile principale precum un plotter GPSMAP sau un sonar STRIKER care sunt sisteme autonome, această extensie este un accesoriu esențial care optimizează integrarea fizică a acestor sisteme la bord, rezolvând constrângerile de distanță fără a compromite integritatea semnalului.

Instalare și Poziționare

Proiectarea extensiei Garmin 010-11617-10 urmărește o instalare simplă și directă, minimizând necesitatea unor unelte complexe sau a modificărilor structurale. Se intercalează ușor între sondă și aparat, asigurând o conexiune sigură și fiabilă. Acest tip de accesoriu este crucial pentru instalațiile personalizate unde lungimea standard a cablului sondei este insuficientă, oferind o soluție mai curată și mai profesională decât încercările de conectare nestandardizate. Se poziționează ca un component esențial de integrare în cadrul ecosistemului Garmin pentru instalațiile de sonde și plottere.

Avis de l'expert

« Optimizing integration of Garmin 4-pin depth sounders »

This Garmin 3-meter extension for 4-pin transducer (reference 010-11617-10) is a fundamental accessory for a successful marine installation. Its purpose is clear: it solves the common issue of distance between the optimal transducer installation point and the chosen location for the multifunction display or fishfinder. In typical cases, especially on larger vessels or with specific console configurations, the transducer's original cable may be too short. Rather than resorting to improvised connection solutions, this extension provides a direct and reliable fix.

Installation is a plug-and-play process, requiring no specific electronics knowledge beyond simply connecting the plugs. This ensures signal integrity and full compatibility with Garmin’s entire 4-pin compatible ecosystem. The key difference from a standard cable lies in its design for the marine environment, providing waterproofing and resistance to the elements. It is important to note that while this extension is compatible with many series (echo™, echoMAP™, STRIKER™), you must verify your transducer and device’s 4-pin specification to avoid incompatibility with 8- or 12-pin transducers or newer connectors.

This product has no inherent limitations other than its fixed length. For distances exceeding 3 meters, you would need to consider a second extension if the Garmin system supports multiple extensions, or reassess the equipment’s placement. It is a discrete but essential component for optimizing the helm layout.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Extensie 3m pentru sondă 4 pini

31,25€

31,25€ ~~40,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the exact length of this Garmin transducer extension cable?

This Garmin transducer extension measures precisely 3 meters (or 10 feet).

Which types of transducers is this extension compatible with?

This extension is specifically designed for Garmin probes and devices with a 4-pin connector.

Can I use this extension with my Garmin GT-20 transducer?

Yes, this extension is compatible with the Garmin GT-20 4-pin transducer.

Does this extension work with Garmin echoMAP™ fishfinders?

Yes, this extension is compatible with a wide range of Garmin echoMAP™ fishfinders, including models such as echoMAP™ 43dv, 44dv, 45dv, 53dv, 54dv, as well as the ECHOMAP™ Plus, UHD, and UHD2 series.

Is the extension cable compatible with Garmin echo™ devices?

Yes, it is compatible with the Garmin echo™ series, including models such as echo™ 100, 150, 200, 300c, 500c, and 550c.

Is this extension compatible with the Garmin STRIKER™ series?

Yes, this extension is compatible with the Garmin STRIKER™, STRIKER™ Plus, and STRIKER™ Vivid series (models 4, 5, 7).

What is this Garmin depth sounder extension cable used for?

This extension cable allows you to extend the range of your compatible transducer to your Garmin sonar unit, providing greater flexibility for mounting the transducer on your boat.

Does using an extension cable affect the signal quality of the depth sounder?

No, this extension is designed to optimize the physical integration of on-board systems by resolving distance constraints without compromising the signal integrity of the depth sounder.

How do I install this extension on my Garmin depth sounder?

Installation is straightforward: simply connect one end of the extension cable to the 4-pin connector of your depth sounder and the other end to the corresponding port on your Garmin sonar unit. It is a plug-and-play system.

Is this extension a genuine Garmin product?

Yes, this is an official Garmin extension cable with supplier reference 010-11617-10.

Can I connect multiple extension cords together to get a length greater than 3 meters?

This extension cable is designed to provide a 3-meter extension. To maintain optimal signal integrity, it is generally recommended to use a single cable of the appropriate length rather than chaining multiple cables.

What is the part number (SKU) of this extension?

The reference number (SKU) for this extension is 010-11617-10.

Is this extension cable designed for marine use?

Yes, as a Garmin accessory for marine transducers, this extension is designed to withstand marine environment conditions.

Does installing this extension require specific tools?

No, installing this extension usually does not require specific tools. The connectors are designed for easy manual plugging and unplugging.

Is this extension compatible with non-Garmin devices?

No, this extension cable is specifically designed for use with Garmin sonar transducers and units equipped with a 4-pin connector.

How do I know if my depth sounder has a 4-pin connector?

You can check the connector type of your depth sounder by consulting its user manual or by visually inspecting the connector. It must clearly have 4 pins.

Is this extension compatible with newer Garmin fishfinders such as the ECHOMAP UHD2?

Yes, it is compatible with the ECHOMAP™ Plus, UHD, and UHD2 ranges, provided the transducer in use has a 4-pin connector.

Where can I install my transducer using this 3-meter extension?

The 3-meter extension gives you greater flexibility in placing your transducer, allowing you to install it in the optimal location on your vessel, even if it is far from your multifunction display.

Is the extension cable connection secure once plugged in?

Yes, Garmin connectors are designed to provide a secure and reliable connection, minimizing the risk of accidental disconnection in a marine environment.

Is this extension compatible with Garmin chartplotters?

Yes, this extension cable is compatible with a wide range of Garmin fishfinders and chartplotters that use 4-pin transducers, such as the echoMAP™ and STRIKER™ series.