Kit de connecteur sur cloison LiveScope™ - Garmin

Kit de connecteur sur cloison LiveScope™ - visuel officiel Garmin 2

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 23%

Garmin

010-13350-00

Kit de conectare pe perete LiveScope™

Le kit de connecteur sur cloison LiveScope™ Garmin (010-13350-00) est conçu pour un montage encastré du câble d'extension LiveScope™, permettant une connexion et déconnexion rapides de la sonde. Idéal pour les systèmes LiveScope™ Plus et XR, il nécessite un trou de 37 mm et un dégagement de 60 mm. Ce kit inclut une base encliquetable, un couvercle, un capuchon résistant aux intempéries et tous les composants de montage.

Prix publicBénéficier du tarif pro

38,24€

38,24€ ~~49,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de conector	Propriétaire Garmin
Tip cablu	Propriétaire Garmin LiveScope
Lungimea cablului	0.0
Rețea compatibilă	Propriétaire Garmin LiveScope
Rețea cablată	Propriétaire Garmin LiveScope
Tipul produsului	Kit de connecteur sur cloison
Modele compatibile	LiveScope, LiveScope Plus, LiveScope XR, LiveScope Plus LVS34, LiveScope XR LVS62
Australian Consumer Law Compliance	Oui
Behind Panel Clearance Required Mm	60
Connector Holder Design	En deux moitiés, avec nervures de décharge de traction
Copyright Year	2023
Finish Plate Alignment Feature	Logo Garmin pour l'orientation, bande d'attache du capuchon météo pour l'alignement dans la rainure
Diametru ferăstrău circular	37
Precauții la găurire în instalare	Vérifier l'arrière de la surface, ne pas percer plus profond que l'épaisseur de la surface
Installation Environment Detail	Pour bateaux nécessitant des manipulations fréquentes ou une installation discrète.
Installation Permanence Note	Éviter le mastic permanent pour les installations temporaires
Installation Safety Gear Required	Lunettes de sécurité, protection auditive, masque anti-poussière
Installation Screwdriver Type	Phillips
Marine Sealant Optional Use	Oui
Mounting Method Conflict Warning	Ne pas utiliser l'écrou de montage et les vis de montage simultanément pour éviter d'endommager le produit.
Mărimea șuruburilor de montaj (metric)	8, 20
Mounting Template Use Method	Utiliser le support de connecteur comme gabarit pour marquer les trous
Tip de montaj	Encastré
Conținut pachet	Connecteur sur cloison, joint autocollant, écrou de montage, vis de montage, plaque de finition, attache de capuchon météo, capuchon météo, vis de fixation
Pilot Hole Drilling Restriction	Ne pas percer les trous pilotes à travers le support de connecteur
Diametru burghiu gaură pilot	2.7
Destinația produsului	Faciliter la connexion et la déconnexion rapides des sondes LiveScope pour une installation propre et discrète.
Anul lansării	2023
Transducer Extension Cable Availability	Oui
Nivel utilizator	Intermédiaire
URL cu informații despre garanție	garmin.com/support/warranty

Description détaillée

Conceput pentru o integrare curată și funcțională, kit-ul de conectare pe perete LiveScope™ Garmin (referință 010-13350-00) permite montajul încastrat al cablului de extensie al sistemului dvs. LiveScope™. Această soluție facilitează conectarea și deconectarea rapidă a sondei, optimizând utilizarea pentru ambarcațiunile care necesită manipulări frecvente sau o instalare discretă. Kit-ul este compatibil cu întreaga gamă LiveScope™, incluzând sistemele LiveScope™ Plus LVS34, LiveScope™ Plus, LiveScope™ XR LVS62 și LiveScope™ XR.

Instalare și compatibilitate

Instalarea kit-ului de conectare pe perete Garmin necesită un spațiu minim de 60 mm în spatele suprafeței de montaj și utilizarea unei ferăstrău de copac de 37 mm pentru trecerea cablului. Pentru o fixare robustă, kit-ul utilizează șuruburi de 8 mm pentru asamblarea celor două jumătăți ale suportului. Dacă accesul în spatele suprafeței de montaj este limitat, se folosesc șuruburi de 20 mm pentru fixarea suportului conectoarelor. În acest caz, sunt necesare găuri pilot de 2,7 mm. Această abordare de instalare asigură o integrare sigură și durabilă, similară cu standardele de montaj ale altor accesorii Garmin precum suporturile de sondă sau trecerile de carenă NMEA 2000.

Componență kit

Kit-ul 010-13350-00 include o bază cu sistem de prindere rapidă, un capac de finisare, un capac protector împotriva intemperiilor pentru protejarea conectoarelor când nu sunt utilizate, precum și toate componentele de montaj necesare. Este esențial de menționat că cablul de extensie LiveScope™ nu este inclus și trebuie achiziționat separat, cu lungimi disponibile de 1 m, 3 m sau 9 m, permițând astfel o flexibilitate de instalare în funcție de configurația navei și poziția modulului sonar.

Documentations

Type	Nom
	Notice d'installation - Instructions d'installation du kit de connecteur sur cloison LiveScope (EN)

Avis de l'expert

Pol CONIN

Responsabil digital

« LiveScope™ integration optimization: Garmin bulkhead connector »

Installing the LiveScope™ system on a boat often faces installation constraints, particularly for users who frequently remove their transducer or require a clean aesthetic finish. The Garmin LiveScope™ bulkhead connector kit directly addresses this need by providing a dedicated cable pass-through solution. Instead of leaving a cable dangling or passing it through a simple hole, this connector ensures a clean, protected termination—essential for cable longevity and reliable connection in a marine environment.

This component is particularly relevant for sport fishing or pleasure boats where space is a critical factor. It allows, for example, quick disconnection of the LiveScope™ transducer for trailer transport, winter storage, or securing when leaving the boat unattended. Installation requires careful preparation, including drilling a 37 mm hole, but the mounting options (rear nut or screws) provide flexibility depending on wall accessibility. It is essential to ensure 60 mm clearance behind the mounting surface to guarantee proper and functional installation.

Compared to generic cable pass-through solutions, this Garmin kit is specifically designed for LiveScope™ connectors, ensuring perfect waterproofing and compatibility. It is a minor investment that optimizes the use and protection of a high-value sonar system, preventing damage risks from repeated handling or excessive connector exposure. It perfectly complements any LiveScope™ installation, whether for Plus or XR versions.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Kit de conectare pe perete LiveScope™

38,24€

38,24€ ~~49,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

GPSMAP® 9010xsv - combina GPS-sondeu 10" premium

Ref : 010-03175-02

3.509,62€

3.509,62€ ~~3.999,98€~~

Garmin

GPSMAP® 9013xsv - combinat GPS-sondeu 13" premium

Ref : 010-03176-02

4.625,58€

4.625,58€ ~~5.499,98€~~

Garmin

GPSMAP® 9017xsv - combinat GPS-ecou sonor 17" de înaltă calitate

Ref : 010-03177-02

6.796,55€

6.796,55€ ~~8.099,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin LiveScope™ transducer wall kit?

The Garmin LiveScope™ through-hull connector kit (part number 010-13350-00) is an accessory designed to enable clean and functional integration of your LiveScope™ extension cable. It provides a solution for flush-mounting the cable, offering a quick connect/disconnect method for your transducer.

What are the advantages of using the LiveScope™ through-hull connector kit?

Using this kit provides several advantages:

Clean and discreet integration of the depth sounder extension cable. The ability to quickly connect and disconnect the transducer, ideal for boats requiring frequent handling. Space optimization and reduced clutter of cables on deck.

What is included in the LiveScope™ transducer cable kit?

The kit includes the necessary components for installing the connector on a bulkhead, such as the halves of the connector bracket, 8 mm and 20 mm screws, a self-adhesive gasket, a mounting nut, a trim plate, and a protective cap.

Is the LiveScope™ through-hull connector kit waterproof?

Yes, the kit is designed for installation that can be made watertight. It is recommended to apply marine sealant in the groove of both halves of the connector bracket when assembling to prevent any water ingress and to create a seal with the extension cable connector.

Is the LiveScope™ through-hull connector kit designed for permanent or temporary installation?

The kit can be used for permanent or temporary installation. If the installation is temporary, it is advisable to avoid using permanent marine sealant to facilitate future disassembly.

Which Garmin LiveScope™ systems is this kit compatible with?

This kit is compatible with the entire Garmin LiveScope™ range, specifically including the following systems:

LiveScope™ Plus LVS34LiveScope™ PlusLiveScope™ XR LVS62LiveScope™ XR

Is this kit compatible with other Garmin transducers than LiveScope™?

The bulkhead connector kit is specifically designed for Garmin LiveScope™ systems and their extension cables. It is not listed as compatible with other types of Garmin transducers.

Do I need a LiveScope™ transducer extension cable with this kit?

Yes, this kit is designed for flush-mounting the extension cable of your LiveScope™ system. You will therefore need a LiveScope™ transducer extension cable of the appropriate length, available from your Garmin dealer.

Which tools are required to install the LiveScope™ transducer connector kit?

For the basic installation, you will need the following tools:

A drillA 37 mm (1 1/2 in) hole sawA Phillips #1 screwdriver bit or screwdriverMarine sealant (optional)If you do not have access to the space behind the mounting surface, you will also need a 2.7 mm (3/32 in) drill bit and a Phillips #2 screwdriver bit or screwdriver.

What is the diameter of the hole to drill for installing the connector through the bulkhead?

You must drill a cable pass-through hole with a diameter of 37 mm (1 1/2 in) using a hole saw.

What is the required clearance behind the mounting surface for this kit?

You must allow a minimum clearance of at least 60 mm (2 12/32 in) behind the mounting surface to ensure proper installation of the kit.

How to secure the connector if I don't have access behind the mounting surface?

If you do not have access to the space behind the mounting surface, you will need to secure the connector bracket using the included mounting screws. To do so:

Mark the locations of the four mounting holes using the connector bracket as a template.Remove the connector bracket from the bulkhead.Using a 2.7 mm (3/32 in) drill bit, drill pilot holes for the four mounting screws.Secure the connector bracket to the mounting surface with the included 20 mm (25/32 in) screws using a Phillips #2 screwdriver.

Which screws are used to assemble the two halves of the connector bracket?

The two halves of the connector bracket are assembled together using the included 8 mm (5/16 in) screws, with a Phillips #1 screwdriver.

Which screws are used to secure the connector bracket when access is restricted?

If you do not have access to the space behind the mounting surface, the connector bracket is secured to the surface using the included 20 mm (25/32 in) screws.

Should marine sealant be used when installing the kit?

Using marine sealant is optional. However, if you wish to prevent water ingress through the connector bracket, it is recommended to apply marine sealant in the groove of both halves of the connector bracket to form a seal.

Can I use both the mounting nut and the mounting screws to secure the connector?

No, you must not use both the mounting nut and the mounting screws to secure the connector. Attempting to use both methods simultaneously could damage the product. Choose one method or the other depending on your access behind the mounting surface.

How to install the finishing plate and protective cap?

To install the finishing plate and protective cap:

Place the protective cap retaining ring around the connector, with the cap hanging downward.Snap the finishing plate onto the connector bracket, ensuring the Garmin logo is oriented upward.Make sure the protective cap’s attachment strip is aligned with the groove at the bottom of the finishing plate.

Are there precautions to take when drilling pilot holes in fiberglass?

Yes, if you mount the device in fiberglass, it is recommended to use a countersink bit to drill a relief counterbore through the top gelcoat layer only. This prevents cracking of the gelcoat when the screws are tightened.

How to orient the connector and bracket during assembly?

During assembly, the front of the connector bracket must be inserted into the groove around the connector. The rear of the connector bracket must slide fully between the strain relief ribs on the connector for correct alignment.