Kit de bază pentru fixarea sondei LiveScope™ Plus LVS34

Yes, the 010-13307-20 base mounting kit is an original accessory from Garmin, specifically designed for their marine equipment.

Yes, this kit is specifically designed for marine use. Its materials are selected for their resistance to corrosion, UV rays, and the harsh conditions encountered on the water.

The product reference (SKU) for this base mounting kit is 010-13307-20.

This mounting kit is specifically designed to be compatible with the Garmin LiveScope Plus LVS34 transducer.

No, this basic mounting kit is specifically designed and optimized for the LiveScope Plus LVS34 transducer. It is not guaranteed to be compatible with other LiveScope transducer models, such as the LVS32 or LVS12, which may require different mounts.

No, this mounting kit is a proprietary Garmin accessory designed to fit only the Garmin LiveScope Plus LVS34 transducer. It is not compatible with transducers from other brands.

No, this kit is specifically designed for the LiveScope Plus LVS34 transducer. LiveScope XR transducers may have different mounting requirements and typically require their own dedicated mounting kits.

Yes, this kit allows mounting the LVS34 transducer, which is then connected to a LiveScope sonar module (such as the GLS 10) and a compatible Garmin multifunction display. The kit itself is a mechanical component and has no direct electronic interaction with the depth sounder system.

The kit is compatible with most types of boats, allowing installation on the transom or on the shaft of an electric motor. Compatibility will depend on your vessel's specific configuration and available installation space.

This mounting kit is designed to allow installation of the LVS34 transducer on the boat’s transom or on the shaft of an electric motor, providing installation flexibility depending on your vessel type and preferences.

To install the basic mounting kit, you will generally need basic tools such as a screwdriver (Phillips or flathead depending on the screws), wrenches (for nuts), and potentially a drill with suitable bits if you need to create mounting holes on your vessel.

This kit is designed for the Garmin LiveScope Plus LVS34 transducer. It serves as a mounting base to properly integrate the transducer into a LiveScope Plus installation.

No. This is only a mounting kit. The LiveScope Plus LVS34 transducer and the associated sonar module must be present separately in the installation.

Useful as a replacement for a lost or damaged mounting base, or when an LVS34 installation needs to be moved or reinstalled cleanly.

Indirectly, yes: a stable and correctly oriented mounting prevents parasitic movements of the transducer. However, sonar quality depends on the transducer, the module, and the system settings.

This must be considered a kit for LiveScope Plus LVS34. For any other Garmin transducer, compatibility must be verified against the exact model before ordering.

Nexus data indicates a base kit with necessary hardware, but final installation depends on the chosen mount. In a marine environment, always use corrosion-resistant and suitable fasteners.

Yes, if the LiveScope installation is already properly identified and the transducer mount is accessible. If there is any doubt about the orientation of the transducer, an installer can prevent mounting errors.

Yes, part number 010-13307-20 is a Garmin reference. It must be used to maintain an installation consistent with the LiveScope Plus ecosystem.

Check that your transducer is indeed a LiveScope Plus LVS34, that the existing mount matches the required installation, and that the location allows for the correct viewing angle.