LUX SL180, bandă luminoasă, CRGBW, 1900mm

The Garmin LUX SL180 LED strip offers a CRGBW (Cold White, Red, Green, Blue, Warm White) color spectrum, enabling a wide range of lighting options.

The Garmin LUX SL180 light bar has a length of 1900 mm.

The Garmin LUX SL180 light bar has an IP68 protection rating. This means it is fully protected against dust and can withstand temporary immersion in water. However, it is not designed for permanent submersion.

Yes, the LUX SL180 LED strip is made from UV-resistant material. However, it is recommended not to install it in areas exposed to prolonged direct sunlight to preserve its durability.

The Garmin LUX SL180 LED strip features 180 CRGBW LEDs per meter, providing uniform and powerful light distribution.

The power consumption of the LUX SL180 LED light strip is 5 watts per meter. For this 1900 mm (1.9 meter) strip, the total power consumption is approximately 9.5 watts.

The LUX SL180 light strip offers adjustable white color temperature, ranging from 2700K (warm white) to 6500K (cool white), allowing different lighting ambiances to be created.

No, although it is rated IP68 for temporary immersion, the LUX SL180 LED light strip is not designed for permanent underwater installation. It is suitable for damp areas but must remain above the waterline.

Installation of the LUX SL180 light strip is simplified by several methods:

A 3M adhesive strip is applied to the back for initial attachment. Fixation clips with screws are provided and recommended in addition to the adhesive for outdoor installations, wet areas, or tight bends, to be placed every 25 to 30 cm or on each side of a bend. Optional stainless steel metal clips can be used for narrow mounting channels or tight bends.

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis only. It is essential not to bend it on the horizontal axis, not to twist it, and not to apply pressure on the LEDs.

The LUX SL180 LED strip is designed for interior and exterior installations above the waterline. It can be installed in wet areas, under coamings, furniture, or behind panels. Avoid areas with prolonged direct sunlight.

Before installation, ensure you disconnect or isolate the vessel's power source and battery. Clean the mounting surface thoroughly with IPA (isopropyl alcohol) to remove dust and dirt.

Yes, screw-mounting clips are included with the LUX SL180 light strip for secure installation. Stainless steel metal clips are also available as an option for specific mounting requirements.

It is recommended to let the 3M adhesive cure for 24 hours before turning on the LED strip to ensure optimal and durable bonding.

Yes, for outdoor installations, wet areas, or tight bends, it is strongly recommended to use mechanical fasteners (screw clips) in addition to the adhesive layer for enhanced security and durability.

Yes, the LUX SL180 LED strip is designed to be used exclusively in conjunction with the Lumishore LUX Strip Light Driver modules. This is an essential component for its operation.

No, it is imperative not to connect the LUX SL180 LED strip to third-party lighting control products or dimmers. It must be used exclusively with Lumishore LUX Strip Light Driver modules. Using other dimmers will void the warranty.

The required input voltage range for the LUX SL180 light strip is 23 to 25V. It must only be used with Lumishore Strip Light Driver modules to ensure compatibility and proper operation.

Lumishore lighting systems, including the LUX SL180 strip light, come with a three-year warranty from the original purchase date, covering manufacturing defects.