LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 1

LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 2

LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 12%

Garmin

010-04455-00

LUX SL180, bandă luminoasă Cut-Seal, 1000 mm

La bande LED Garmin LUX SL180 CRGBW 1000mm offre un éclairage marin personnalisable avec spectre complet et blanc réglable. Classée IP68 et découpable tous les 100mm, elle s'intègre discrètement grâce à son profil de 5 mm et 14,5 mm. Ce modèle de la gamme LUX nécessite un module de pilote Lumishore LUX Strip Light et est fourni avec le nécessaire de coupe et d'étanchéité pour une installation optimisée.

Prix publicBénéficier du tarif pro

60,91€

60,91€ ~~69,98€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse LED
Tensiune de funcționare	23-25 V
Consum electric tipic	5 W
Culoare lumină	Multicolore (CRGBW)
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	1.0
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Tip adeziv	3M
Cut Interval Mm	100
Depth Mm	5
Driver Compatibility	Lumishore Lux Strip Light Driver Module
Fasteners Recommended	Oui
Înălțime	14.5
Mediu instalare	Intérieur/Extérieur (zones humides)
Min Bend Radius Mm	50
Sealant Included	Oui
Rezistență UV	Oui

Description détaillée

Banda LED Garmin LUX SL180 CRGBW de 1000 mm, proiectată pentru iluminat marin, este o soluție versatilă și personalizabilă. Acest model, parte a gamei LUX de Garmin/Lumishore, se distinge prin capacitatea de a fi tăiată la fiecare 100 mm, permițând o adaptare precisă la diverse spații la bord. Spre deosebire de benzile LED generice, LUX SL180 este special concepută pentru mediul marin, oferind o construcție complet încapsulată și rezistență la UV, cu un grad de etanșeitate IP68.

Performanță și flexibilitate în iluminat

Banda LUX SL180 integrează 180 LED-uri CRGBW pe metru, furnizând un spectru complet de culori RGB, precum și un alb reglabil între 2700 K și 6500 K. Această caracteristică permite crearea unor ambienturi variate, de la alb cald pentru confort până la alb rece pentru activități. Consumul mediu de energie este de 8,7 W/m, cu o putere nominală de 5 wați pe metru. Funcționează cu o tensiune de intrare de 23-25 V prin modulul de comandă Lumishore Lux Strip Light, sau de 10,5-31 VCC printr-un modul de control LUX. Curentul consumat este de 0,6 A/m la 12 V și 0,36 A/m la 24 V prin modulul de comandă al benzii. Dimensiunile compacte (5 mm adâncime, 14,5 mm înălțime) permit o integrare discretă sub pavăuze, în spatele panourilor sau sub mobilier.

Instalare și integrare în sistem

Instalarea benzii LUX SL180 este facilitată de designul "tăiere și etanșare". Poate fi tăiată la lungimea dorită și etanșată cu kit-ul furnizat, asigurând o protecție IP68 după tăiere. Banda se fixează cu ajutorul unui adeziv 3M, completat cu elemente de prindere mecanică recomandate pentru instalările exterioare, zone umede sau curbe strânse. Este esențial să se utilizeze acest produs exclusiv cu modulele de comandă Lumishore LUX Strip Light, deoarece conectarea la module terțe anulează garanția de trei ani. Banda suportă o curbură de 50 mm pe axa verticală numai și nu trebuie răsucită sau îndoită orizontal. Controlul iluminării poate fi realizat printr-un ecran multifuncțional compatibil (MFD), un ecran Lumishore, un dispozitiv inteligent (necesită un centru de comandă EOS-LUX) sau un întrerupător momentan (necesită un modul de comandă al benzii).

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse LUX SL180 (IP68) CRGBW

Avis de l'expert

« Garmin LUX SL180 marine LED lighting: CRGBW flexibility and integration »

The Garmin LUX SL180 LED strip is positioned as a flexible and robust lighting solution for a wide range of marine applications. Its main added value lies in its "cut-and-seal" design and its CRGBW capabilities. This feature allows installers to precisely adjust the strip length to the available space, providing a significant advantage over pre-cut LED strips by reducing waste and optimizing both aesthetic and functional integration. The CRGBW spectrum offers superior lighting versatility, covering not only ambient colors but also tunable white, essential for practical applications such as cockpit or walkway lighting, where color temperature can influence visual comfort.

From an installation perspective, it is imperative to emphasize the necessity of using only Lumishore LUX Strip Light pilot modules. Ignoring this requirement not only voids the warranty but can also compromise system performance and durability. The cutting and sealing process, while straightforward, must be carried out carefully and precisely to maintain the IP68 rating and protection against marine environments. For outdoor installations or areas subject to vibrations, adding mechanical fasteners in addition to the 3M adhesive is a recommended practice to ensure long-term durability. This strip is ideal for recreational boats, sailboats, and yachts seeking subtle or functional accent lighting that is customizable and capable of withstanding marine conditions without being designed for permanent submersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă luminoasă Cut-Seal, 1000 mm

60,91€

60,91€ ~~69,98€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin LUX SL180 light bar?

The Garmin LUX SL180 LED light strip is a versatile and customizable lighting solution specifically designed for marine environments. It is part of Garmin/Lumishore's LUX range and provides CRGBW lighting (cool white, red, green, blue, warm white).

What is the length of the LUX SL180 light strip and can it be cut?

The LUX SL180 LED strip has a length of 1000 mm. It is designed to be precisely cut every 100 mm, allowing easy adaptation to various spaces aboard your boat.

What is the waterproof rating of the Garmin LUX SL180 LED strip?

The LUX SL180 LED light strip has an IP68 waterproof rating. This means it is fully encapsulated and water-resistant, making it suitable for damp areas. However, it is not designed for continuous submersion in water.

What is the power consumption of the LUX SL180 LED strip?

The average power consumption of the LUX SL180 strip is 8.7 W per meter, with a nominal power output of 5 watts per meter.

What are the physical dimensions of the LUX SL180 LED strip?

The compact dimensions of the LUX SL180 band are 5 mm in depth and 14.5 mm in height. These dimensions allow for discreet integration under the coamings or behind panels.

Is the LUX SL180 light strip UV-resistant?

Yes, the LUX SL180 LED strip is made from UV-resistant material. However, it is recommended not to install it in areas exposed to strong and prolonged direct sunlight.

How should the light strip be handled during installation?

During installation, handle the strip carefully:

Do not drop or bend it. Do not fold it horizontally or twist it. Do not apply pressure to the LED area; only press on the edge of the strip. For lengths over one meter, use two people. Carefully unwind it from the reel and lay it flat in a straight line.

What is the minimum bending radius allowed for the LUX SL180 tape?

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis. It is imperative not to bend it on the horizontal axis or twist it, as this could damage it and void the warranty.

What are the steps to cut and seal the LED strip?

To cut and seal the tape:

Unroll the tape on a flat surface and identify the cutting point closest to the desired length (every 100 mm). Cut only at the marked cutting points using scissors, in one single motion at the center of the cutting tabs. Remove 20 mm of the adhesive backing from the end to be sealed, then lightly scrape the adhesive 10 mm from the end to expose the silicone. Fill the end cap halfway with the supplied silicone adhesive. Attach the end cap, clean off excess adhesive, and allow to cure for 24 hours before handling.

How to install the LUX SL180 LED strip?

The strip can be mounted in several ways:

3M adhesive: Clean the mounting surface thoroughly with IPA, remove the 3M adhesive backing, and press the strip firmly into place. Allow the adhesive to cure for 24 hours before powering the light.Mechanical fasteners: For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive. These clips should be spaced 25 to 30 cm apart and/or placed on either side of a bend.Optional mounting clips: For narrow mounting channels, stainless steel metal clips may be provided. They are secured with a countersunk screw.

Is it necessary to disconnect the boat's power supply before installation?

Yes, it is imperative to always ensure that the boat's power source and battery are disconnected or isolated before installing the LED strip.

Can I install the LUX SL180 panel myself?

It is strongly recommended that a qualified professional perform the electrical and mechanical installation of the LUX SL180 LED strip to ensure proper installation and maintain warranty validity.

What is the drying time of the silicone adhesive after sealing the tape?

After sealing the end of the tape with the supplied silicone adhesive, it is necessary to let the adhesive cure for a full 24 hours before handling the tape or energizing it.

With which autopilot module is the LUX SL180 light bar compatible?

The LUX SL180 light strip is designed to be used exclusively with Lumishore Lux Strip Light Driver control modules. Using any other third-party lighting control product or driver will void the warranty.

What is the required input voltage range for the LUX SL180 band?

The LUX SL180 light strip operates with an input voltage range of 23-25 V via the Lumishore Lux Strip Light driver module, or 10.5-31 VDC via a LUX control module. It is essential to use only the specified Lumishore driver modules.

Can I connect the LUX SL180 strip to a lighting controller from another brand?

No, the LUX SL180 LED strip must be connected only to Lumishore Lux Strip Light Driver control modules. Using third-party lighting control products or drivers will void the product warranty.

What is the warranty duration for the LUX SL180 LED light strip?

Lumishore lighting systems and accessories (including the LUX SL180 strip) are warranted free from manufacturing defects for a period of three years from the original purchase date.

Which actions may void the warranty of the LUX SL180 LED strip?

The warranty will be void in the following cases:

Misuse, abuse, or incorrect installation. Negligence, improper shipping, or damage caused by disasters (fire, flood, storm, lightning). Installation by unqualified personnel, unauthorized repair, or modification. Unapproved installations or failure to comply with installation, maintenance, and usage instructions specified in the manual. Use with third-party drivers other than Lumishore Lux Strip Light Driver modules.

Does cutting and sealing the LUX SL180 light strip void the warranty?

No, cutting and sealing the LED strip does not void the warranty, provided that all instructions detailed in the installation manual are strictly followed. It is mandatory to use only the sealant supplied with the product for sealing.