LUX SL180, bandă luminoasă, CRGBW, 200mm

The Garmin LUX SL180 LED strip provides a full CRGBW color spectrum, including cool white, red, green, blue, and warm white. It also features tunable white lighting, allowing color temperature to be adjusted from 2700K to 6500K.

Yes, the Garmin LUX SL180 LED strip has an IP68 protection rating, making it suitable for indoor and outdoor installations, including damp areas. However, it is not designed for permanent submersion in water.

The Garmin LUX SL180 light bar has a length of 200 mm.

Yes, the Garmin LUX SL180 light bar is made from UV-resistant material. However, it is recommended not to install it in areas exposed to direct strong sunlight.

Yes, the LED strip can be bent to a minimum radius of 50 mm, but only along the vertical axis. It is important not to bend it along the horizontal axis or twist it to avoid damaging the product.

For installation, ensure the boat's power supply is disconnected or isolated. Clean the mounting surface thoroughly with isopropyl alcohol (IPA) to remove dust and dirt. Remove the 3M adhesive backing and press the light strip firmly into place, applying pressure only to the edges and not the LEDs. Allow the adhesive to cure for 24 hours before turning on the light.

Yes, it is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the Garmin LUX SL180 LED strip to ensure correct and safe installation.

For outdoor installations, in damp areas or for tight bends, it is recommended to use mechanical fasteners (mounting clips) in addition to the 3M adhesive layer. These clips should be placed every 25 to 30 cm and/or on each side of a bend.

No, the Garmin LUX SL180 LED strip is supplied in pre-cut, factory-sealed lengths to meet IP68 standards. It is imperative not to cut the LED strip, as this would void its waterproofing and warranty.

During installation, unroll the light strip carefully from the reel to prevent it from falling or twisting. Do not apply pressure to the LED area; only handle the edges of the strip. Do not pull, stretch, twist, or bend the strip along the horizontal axis. For lengths over one meter, it is recommended to use two people.

The Garmin LUX SL180 light bar is designed to be used exclusively with Lumishore LUX light bar control modules. It must not be connected to other third-party lighting control products or autopilot systems, as this could cause malfunctions and void the warranty.

The Garmin LUX SL180 LED strip requires an input voltage between 23 and 25V. It must be used exclusively with Lumishore LUX LED strip control modules.

No, the Garmin LUX SL180 LED strip must not be connected directly to a power source. It must be connected to a Lumishore LUX LED strip driver module, which provides the correct voltage and control.

The warranty for the Garmin LUX SL180 LED light bar is three years from the original purchase date, covering manufacturing defects.

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or non-approved installations. Use with third-party autopilots other than Lumishore LUX will also void the warranty.

The Garmin LUX SL180 LED light strip has an electrical consumption of 5 watts per meter.

The LUX SL180 LED strip is versatile and can be installed under gunwales, furniture, behind panels, or in other indoor and outdoor areas to create ambiance or accent lighting.

The light strip is equipped with a 3M adhesive backing for initial attachment. For enhanced security, especially outdoors or in damp areas, the use of stainless steel screw-mounted mounting clips is recommended as an additional measure.

The Garmin LUX SL180 light bar is primarily designed as an ambient and accent lighting solution for vessels, offering a full CRGBW color spectrum and tunable white lighting.

The CRGBW lighting (cool white, red, green, blue, warm white) offers maximum flexibility to create various lighting ambiences. It allows not only vivid colors, but also pure white and warm white, providing a complete range of lighting options to adapt to all situations and preferences.