LUX SL180, Strip Light, CRGBW, 3900mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Garmin

010-04398-00

LUX SL180, bandă luminoasă, CRGBW, 3900mm

Le Garmin LUX SL180 est une bande lumineuse marine CRGBW de 3900mm, offrant un spectre complet de couleurs et des blancs tunables (2700K-6500K). Certifiée IP68 et résistante aux UV, elle est sécable tous les 100mm pour une intégration discrète et personnalisée sur votre navire, hors immersion permanente.

Ce produit est livré avec des bandes adhésives 3M, des clips à vis de fixation et un kit d'étanchéité pour les coupes, nécessitant un module de pilote Lumishore LUX Strip Light Driver pour son fonctionnement.

Prix publicBénéficier du tarif pro

250,00€

250,00€ ~~289,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse marine
Tensiune de funcționare	23-25 V
Consum electric tipic	19.5 W
Culoare lumină	Multicolore (CRGBW)
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	3.9
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Control Interface	Interrupteur momentané, Écrans multifonctions (MFD), Écrans Lumishore, Appareils intelligents (via centre de commande EOS-LUX)
Cuttable	Non
Fastener Spacing Recommendation	25-30
Minimum Bend Radius Vertical	50
Tip de montaj	Adhésif 3M, Clips de fixation
Consum electric pe metru	5 W/m
Required Advanced Control Module	EOS-LUX
Required Driver Module	Lumishore LUX Strip Light Driver Module
Salt Fog Resistance	Oui
Rezistență UV	Oui

Description détaillée

Proiectat pentru iluminatul marin deasupra liniei de plutire, banda luminoasă Garmin LUX SL180 CRGBW de 3900mm oferă o soluție de iluminat personalizabilă cu un spectru complet de culori. Acest model integrează 180 LED CRGBW pe metru, permițând reglarea precisă a culorii și a temperaturii albe, de la alb rece (6500K) la alb cald (2700K). Indicele său de protecție IP68 îl face potrivit pentru instalații interioare și exterioare, rezistent la praf și la stropiri de apă, deși nu este conceput pentru imersiune permanentă.

Integrare și personalizare sistem

LUX SL180 se remarcă prin flexibilitatea sa de instalare. Este secționabilă la fiecare 100mm, permițând o adaptare la dimensiunile spațiilor de pe navă. Banda luminoasă este fabricată dintr-un material rezistent la UV și a fost testată în ceață salină, asigurând durabilitatea în mediul marin. Controlul este versatil, realizându-se fie printr-un întrerupător momentan, fie prin integrare completă cu ecrane multifuncționale (MFD) compatibile, ecrane Lumishore sau dispozitive inteligente, cu condiția utilizării unui centru de comandă EOS-LUX pentru gestionarea avansată.

Instalare și compatibilitate

Instalarea benzii luminoase Garmin LUX SL180 este facilitată de benzi adezive 3M și cleme cu șurub incluse. Pentru zonele umede sau curburile strânse, se recomandă utilizarea unor fixări mecanice suplimentare. Flexibilitatea benzii permite o curbură de 50mm pe axa verticală pentru a se adapta suprafețelor curbate, dar este imperativ să nu fie îndoită orizontal sau răsucită. Acest sistem necesită neapărat un modul de comandă Lumishore LUX Strip Light Driver pentru a funcționa, asigurând o alimentare stabilă (23-25V) și o compatibilitate optimă. Fiecare metru consumă în medie 8.7W.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Responsabil digital

« Customizable CRGBW ambient lighting for marine integration »

The Garmin LUX SL180 LED strip, from the Lumishore range, is a sophisticated ambient lighting solution for recreational vessels and yachts. Its CRGBW design, offering a full color spectrum and adjustable whites, allows adapting the atmosphere to each time of day or desired mood. It is particularly relevant for applications requiring discreet integration along coamings, under furniture, or behind panels, thanks to its low profile and ability to be cut every 100mm for precise fitting. This flexibility is a major advantage over fixed luminaires.

Installation requires special attention, especially for lengths over one meter where two-person handling is recommended to avoid any twisting or horizontal bending, which could compromise the strip's integrity. The need to use a dedicated Lumishore LUX Strip Light Driver module is a constraint to consider when planning the electrical system, as it ensures compatibility and warranty validity. This system is ideal for owners seeking customizable and durable ambient lighting, but it is crucial to note that it is specifically designed for installations above the waterline, despite its IP68 rating.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă luminoasă, CRGBW, 3900mm

250,00€

250,00€ ~~289,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

TD 50, ecran tactil de 5"

Ref : 010-02139-10

507,24€

507,24€ ~~689,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of this Garmin LUX SL180 LED strip?

The Garmin LUX SL180 LED strip has a total length of 3900 mm (3.9 meters).

What are the color and white temperature options available with the LUX SL180?

The LUX SL180 is a CRGBW LED strip, offering a full spectrum of colors. It also allows adjustment of the white temperature, ranging from cool white (6500K) to warm white (2700K).

Can the LUX SL180 LED strip light be installed outdoors on a boat?

Yes, the LUX SL180 LED strip is designed for both indoor and outdoor use. It has an IP68 protection rating, making it resistant to dust and water splashes. However, it is not designed for permanent immersion in water.

What is the minimum bending radius for installing the LUX SL180 LED strip?

The LUX SL180 LED strip has a minimum bending radius of 50 mm, but only on the vertical axis. It must not be bent on the horizontal axis or twisted.

How should the LUX SL180 LED strip be controlled?

The LUX SL180 can be controlled in multiple ways. It can be operated via a momentary switch or fully integrated with compatible multifunction displays (MFD), Lumishore displays, or smart devices. For advanced management, an EOS-LUX control hub is required.

What equipment is required to operate the LUX SL180 LED strip light?

The LUX SL180 LED strip must be used together with Lumishore LUX strip light driver modules (Lumishore Lux Strip Light Driver modules). It must not be connected to other lighting control products or third-party drivers.

What is the power consumption of the LUX SL180 LED light bar?

The power consumption of the LUX SL180 LED strip is 5 watts per meter.

What is the required input voltage range for the LUX SL180 LED light bar?

The required input voltage range for the LUX SL180 LED strip is 23 to 25V. It must only be used with Lumishore LED strip driver modules.

Is the LUX SL180 LED strip resistant to UV and salt spray?

Yes, the LUX SL180 LED strip is made from UV-resistant material and has been salt spray tested, ensuring its durability in a marine environment.

What are the initial steps before starting the installation of the LED strip light?

Before any installation, it is essential to ensure that the vessel's power source and battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

How to clean the mounting surface before installing the LUX SL180 LED strip?

The mounting surface must be thoroughly cleaned using isopropyl alcohol (IPA) to ensure it is free of dust and dirt before applying the LED strip.

How to install the LUX SL180 LED strip using 3M adhesive?

For installation, remove the 3M adhesive protective layer and firmly press the light strip into place. Apply pressure only to the edges and do not press on the LEDs. Allow the adhesive to set for 24 hours before turning on the light strip.

Is mechanical fastening required in addition to adhesive for outdoor installation?

Yes, for outdoor installations in wet areas or with tight bend radii, it is recommended to use mechanical fasteners in addition to the adhesive layer. These fasteners should be spaced 25 to 30 cm apart or placed on each side of a bend.

What are the risks if I use a lighting controller from another brand with the LUX SL180?

Using the LUX SL180 LED strip with lighting controllers from third parties other than Lumishore LUX LED strip controllers will void the product warranty.

What is the warranty duration for the LUX SL180 lighting system?

The LUX SL180 lighting system is covered by a three-year warranty from the original purchase date, covering manufacturing defects.

Which actions may void the warranty of the LUX SL180 LED strip?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with installation, maintenance, and usage guidelines also voids the warranty.

Can the light bar be twisted or bent along the horizontal axis?

No, it is essential not to bend the LED strip on the horizontal axis or twist it. It must only be bent on the vertical axis with a minimum radius of 50 mm.

Is it necessary to have two people to install long lengths of LED strip lights?

Yes, it is always recommended to use two people to install LED strip lengths longer than 1 meter. One person for installation and another to hold and unroll the strip carefully.