LUX SL180, Strip Light, CRGBW, 800mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Garmin

010-04369-00

LUX SL180, bandă de iluminat, CRGBW, 800mm

Conçu pour l'éclairage marin d'ambiance, le bandeau lumineux Garmin LUX SL180 de 800mm offre un spectre CRGBW complet avec une protection IP68. Il nécessite un module driver Lumishore LUX dédié pour fonctionner, assurant une intégration électrique marine précise. Ce modèle, livré en longueur fixe et intégrant un adhésif 3M pour une installation initiale, ne doit pas être coupé.

Prix publicBénéficier du tarif pro

62,95€

62,95€ ~~69,98€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bandeau lumineux
Tensiune de funcționare	23-25
Consum electric tipic	4
Temperatură culoare	4600.0
Culoare lumină	Blanc froid, Rouge, Vert, Bleu, Blanc chaud
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	0.8
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Color Temperature Range K	2700-6500
Compatible Driver Module	Lumishore LUX Strip Light Driver
Cuttable	Non
Mediu instalare	Intérieur, Extérieur, Zones humides
Material	Matériau résistant aux UV
Tip de montaj	Adhésif 3M
Consum electric pe metru	5
Dimensiuni produs (L x l x H)	800 (L)
Salt Fog Resistance	Oui
Rezistență UV	Oui

Description détaillée

Proiectat pentru iluminatul marin, banda luminoasă Garmin LUX SL180 de 800mm (referință 010-04369-00) oferă o soluție de iluminare CRGBW cu spectru complet. Aceasta furnizează iluminare versatilă, incluzând alb rece, roșu, verde, albastru și alb cald, cu o temperatură de culoare reglabilă între 2700K și 6500K. Fiecare metru integrează 180 LED-uri, cu un consum de 5 wați pe metru.

Integrare și instalare

LUX SL180 este proiectat special pentru a funcționa cu modulele driver pentru benzi luminoase Lumishore LUX, necesitând o tensiune de intrare cuprinsă între 23 și 25V. Este esențial să nu fie conectat la produse sau drivere terțe pentru a menține valabilitatea garanției și performanța sistemului. Banda este etanșă, cu certificare IP68, permițând instalarea atât în interior, cât și în exterior, inclusiv în zone umede, dar nu este destinată imersiunii permanente.

Durabilitate și flexibilitate

Fabricată dintr-un material rezistent la UV și testată în ceață salină, banda luminoasă Garmin LUX SL180 asigură durabilitate în mediul marin. Este livrată în lungimi gata de utilizare, sigilate la fabrică pentru a garanta conformitatea IP68; nu trebuie tăiată sub nicio formă. Pentru instalare, prezintă un rază minimă de curbură de 50mm pe axa verticală, dar nu trebuie îndoită pe axa orizontală sau răsucită. Montajul se realizează prin intermediul unui adeziv 3M integrat, completat cu fixări mecanice recomandate pentru instalații exterioare, zone umede sau raze de curbură strânse. Comparativ cu soluțiile de iluminat monocrom, LUX SL180 se remarcă prin spectrul CRGBW complet și integrarea controlată prin drivere dedicate, oferind personalizare avansată a atmosferei luminoase la bord.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation réglette lumineuse LUX SL180 CRGBW 800mm (EN)

Avis de l'expert

Pol CONIN

Responsabil digital

« Analysis of the Garmin LUX SL180 CRGBW light strip for marine applications »

The Garmin LUX SL180 LED light bar (Lumishore technology) is a targeted marine ambient lighting solution for recreational vessels and yachts requiring advanced chromatic customization. Its fixed 800mm length, factory-sealed to IP68 standards, is a key advantage for long-term robustness and waterproofing, eliminating the infiltration risks associated with on-site cuts. While this limits the cutting flexibility of some competing light bars, it ensures superior structural and electrical integrity for demanding marine environments.

Integration of the LUX SL180 requires the use of a dedicated Lumishore LUX driver module, which manages the 23-25V power supply and enables CRGBW color control. This dependency on a proprietary ecosystem is a critical factor to consider during installation planning; it ensures optimal compatibility and performance but requires coordinated component selection. Mechanical installation is straightforward thanks to the integrated 3M adhesive, though adding mounting clips is essential for enhanced durability in outdoor areas or zones subject to dynamic stresses. This product is ideal for creating ambient lighting on side decks, under furniture, or behind panels, but should not be used in areas of direct sunlight exposure or constant immersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă de iluminat, CRGBW, 800mm

62,95€

62,95€ ~~69,98€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the exact length of this Garmin LUX SL180 LED strip?

The Garmin LUX SL180 LED strip has a length of 800 mm.

What lighting colors are available with the LUX SL180 strip?

The LUX SL180 strip provides full-spectrum CRGBW lighting, including cold white, red, green, blue, and warm white.

Is the LUX SL180 LED strip waterproof?

Yes, the LUX SL180 LED strip is IP68 certified, meaning it is waterproof and can be installed indoors or outdoors, including in damp areas. However, it is not designed for permanent immersion in water.

What is the power consumption of this LUX SL180 800mm LED light bar?

The LUX SL180 LED strip consumes 5 watts per meter. For this 800 mm model, the total consumption is 4 watts (5W/m * 0.8m).

Can the color temperature of the LUX SL180 strip lighting be adjusted?

Yes, the color temperature of the LUX SL180 LED strip is adjustable from 2700K (warm white) to 6500K (cool white).

Is the LUX SL180 banner resistant to UV and salt spray?

Yes, the banner is made from UV-resistant material and has been tested for salt spray resistance, ensuring durability in marine environments.

How many LEDs does the LUX SL180 strip integrate per meter?

Each meter of the LUX SL180 LED strip integrates 180 LEDs.

Can the LUX SL180 LED strip be cut to adjust its length?

No, the LUX SL180 LED strip is supplied in pre-cut, factory-sealed lengths to ensure IP68 compliance. It must not be cut under any circumstances.

How to install the LUX SL180 LED strip light?

The strip can be installed using its integrated 3M adhesive backing. For outdoor installations, wet areas, or tight radii, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive.

What is the minimum allowed camber for the LUX SL180 band?

The LUX SL180 banner has a minimum bending radius of 50 mm only in the vertical axis. It must not be bent in the horizontal axis or twisted.

Should the boat's power supply be disconnected before installing the display panel?

Yes, it is essential to always ensure that the vessel's power source and the battery are disconnected or isolated before any electrical installation.

Where should the LUX SL180 light strip NOT be installed?

Although UV-resistant, the display bezel must not be installed in areas exposed to direct strong sunlight. It is also not designed for permanent immersion in water.

How long should you wait after adhesive installation before turning on the LED strip?

It is recommended to let the adhesive cure for 24 hours before turning on the LED strip.

Is it necessary to clean the surface before sticking the LUX SL180 strip?

Yes, the mounting surface must be carefully cleaned with IPA (isopropyl alcohol) and ensured to be free of dust and dirt before applying the strip.

Should pressure be applied to the LEDs during adhesive installation?

No, when installing with adhesive, pressure should only be applied to the edges of the strip, not on the LEDs.

Which autopilot modules are compatible with the Garmin LUX SL180 light bar?

The Garmin LUX SL180 LED strip is specifically designed to work only with the Lumishore LUX LED strip driver modules.

Can the LUX SL180 strip be connected to third-party lighting drivers or products?

No, it is critical not to connect the LUX SL180 strip to third-party lighting products or drivers. This could compromise system performance and void the warranty.

What is the required input voltage range for the LUX SL180 strip light?

The LUX SL180 strip requires an input voltage range of 23 to 25V, supplied by the Lumishore LUX LED strip driver modules.

What is the warranty duration for the LUX SL180 LED strip?

The lighting system and associated accessories, including this light strip, are warranted by Lumishore Ltd against manufacturing defects for a period of three years from the original purchase date.

What can void the warranty of the LUX SL180 display?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, unauthorized repair or modification, or non-compliance with all installation guidelines and usage instructions, including connection to unauthorized third-party drivers.