LUX SL180, Strip Light, CRGBW, 3400mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 12%

Garmin

010-04394-00

LUX SL180, bandă luminoasă, CRGBW, 3400mm

La bande lumineuse GARMIN LUX SL180 CRGBW de 3400 mm est une solution d'éclairage marin complète, offrant une lumière CRGBW réglable (2700K-6500K) et une protection IP68. Elle intègre 180 LED par mètre, est livrée en longueurs prédéfinies et ne doit pas être coupée, et se contrôle via un module pilote Lumishore LUX Strip Light Driver (non inclus), compatible MFD via le centre de commande EOS-LUX. Cet éclairage fait partie de la gamme Lumishore LUX Lighting, réputée pour ses solutions d'éclairage intelligentes et durables. Le produit inclut la bande lumineuse LUX SL180 avec adhésif 3M et des clips à visser.

Prix publicBénéficier du tarif pro

226,48€

226,48€ ~~259,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse
Tensiune de funcționare	23-25 V
Consum electric tipic	17 W
Culoare lumină	Blanc froid, Rouge, Vert, Bleu, Blanc chaud
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	3.4
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Adhesive Curing Time Hours	24
Bend Axis Restriction	Vertical uniquement
Compatible Driver Module	Lumishore LUX Strip Light Driver Module
Cuttable	Non
Fastener Spacing Cm	25-30
Min Bend Radius Vertical	50
Mounting Clip Attachment Type	Vis à tête fraisée
Optional Mounting Clips Material	Acier inoxydable
Salt Fog Tested	Oui
Rezistență UV	Oui

Description détaillée

Banda luminoasă GARMIN LUX SL180 CRGBW de 3400 mm este o soluție de iluminat marin versatilă, concepută pentru aplicații în afara apei. Face parte din colecția Lumishore LUX Lighting și oferă iluminat CRGBW (alb rece, roșu, verde, albastru, alb cald) cu o temperatură de culoare albă reglabilă între 2700K și 6500K, permițând personalizarea completă a atmosferei luminoase la bord.

Concepție și specificații tehnice

Modelul SL180 integrează 180 LED-uri CRGBW pe metru, asigurând o luminozitate și o uniformitate optime. Designul său flexibil permite instalarea discretă în diverse locații, precum pavăze, sub mobilier sau în spatele panourilor. Banda este fabricată dintr-un material rezistent la UV și a fost testată în mediu cu ceață salină pentru o durabilitate sporită în condiții marine. Are un grad de protecție IP68, fiind adecvată pentru instalații interioare și exterioare, inclusiv în zone umede, deși nu este proiectată pentru imersie permanentă.

Instalare și control

Instalarea benzii LUX SL180 este facilitată de un adeziv 3M integrat. Pentru zonele exterioare, umede sau cu raze de curbură strânse, se recomandă utilizarea de fixări mecanice (clipuri cu șurub furnizate sau clipuri metalice din oțel inoxidabil opționale) la fiecare 25-30 cm. Banda are un rază minimă de curbură de 50 mm pe axa verticală, dar nu trebuie îndoită pe axa orizontală sau răsucită. Este alimentată cu o tensiune de 10,5-31 VCC printr-un modul de control LUX și necesită un driver de bandă luminoasă LUX Strip Light Driver Lumishore, capabil să susțină până la 10 metri de bandă. Controlul poate fi realizat prin intermediul MFD-urilor compatibile, ecrane Lumishore, dispozitive inteligente (necesitând centrul de comandă EOS-LUX) sau un întrerupător momentan, oferind o reglare a iluminării în serie. Banda este livrată în lungimi predefinite sigilate la fabrică pentru a respecta standardele IP68 și nu trebuie tăiată.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation pour bande lumineuse LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the Garmin LUX SL180 CRGBW marine LED strip light »

The Garmin LUX SL180 light strip is an auxiliary lighting solution for recreational boats, rigid inflatables, and even cruising vessels seeking a colored ambiance touch. Its 3400 mm length suits significant linear installations, such as along the gunwales, under cockpit seats, or inside cabins. The key advantage of this product lies in its CRGBW capability, offering not only a full color range but also adjustable warm and cool white from 2700K to 6500K, allowing adaptation to any ambiance or functional need.

System integration is a critical point: the SL180 absolutely requires a Lumishore LUX Strip Light Driver module. Without this driver, the system will not operate. For advanced control and synchronization with other Garmin or Lumishore equipment, adding an EOS-LUX control hub is necessary, enabling operation via MFD or smartphone. This positions the SL180 as part of a broader lighting ecosystem rather than a standalone solution.

Regarding installation, it is essential to respect the 50 mm minimum bend radius on the vertical axis to avoid damaging the strip. Although 3M adhesive is supplied, using mounting clips is strongly recommended for any outdoor installation, in wet areas, or subject to vibrations, to ensure durable and IP68-compliant mounting. The strip is factory-sealed in predefined lengths to meet IP68 standards and must not be cut. Therefore, selecting the correct length from the outset is crucial, as any modification will void the warranty and compromise waterproofing.

This model stands out for its chromatic versatility and integration within the Lumishore/Garmin ecosystem, making it more relevant for users already equipped or considering a complete, connected lighting solution. For a simple white light strip, more basic and cost-effective alternatives exist, but they will not offer the SL180’s color richness or advanced control options.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă luminoasă, CRGBW, 3400mm

226,48€

226,48€ ~~259,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

TD 50, ecran tactil de 5"

Ref : 010-02139-10

507,24€

507,24€ ~~689,00€~~

Garmin

Boxe serie Signature 3i 7,7" 280W (per pereche)

Ref : 010-02772-00

322,15€

322,15€ ~~399,00€~~

Garmin

Afișaj multifuncțional GMI 20 - 4''

Ref : 010-01140-00

474,04€

474,04€ ~~599,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of this Garmin LUX SL180 LED strip?

The Garmin LUX SL180 light strip has a length of 3400 mm.

What lighting colors are available with the LUX SL180 LED strip?

The LUX SL180 light strip features CRGBW lighting, which includes cool white, red, green, blue, and warm white.

Is it possible to adjust the color temperature of the white on this LED strip?

Yes, the color temperature of the white light is adjustable from 2700K to 6500K, allowing full customization of the lighting ambiance on board.

What is the IP rating of the Garmin LUX SL180 light bar?

The Garmin LUX SL180 LED light strip has an IP68 protection rating, making it suitable for both indoor and outdoor installations, including in wet areas.

Can this LED strip be installed underwater?

No, although it can be installed in damp areas, the LUX SL180 LED light strip is not designed for permanent immersion in water.

How is the LUX SL180 light strip mounted during installation?

Installing the LUX SL180 strip is made easier by integrated 3M adhesive. For outdoor areas, wet zones, or tight radii, mechanical fasteners are recommended in addition to the adhesive.

Can I cut the LUX SL180 LED light strip to fit a specific length?

No, the LED strip is supplied in pre-cut lengths sealed at the factory to meet IP68 standards. It is imperative not to cut the LED strip.

What is the minimum bending radius for installing this LED strip?

The LED strip has a minimum bending radius of 50 mm on the vertical axis. It is important not to bend it on the horizontal axis or twist it.

Which modules are required to control this LED strip?

The LUX SL180 LED light strip is designed to be used in conjunction with Lumishore Lux Strip Light Driver modules.

Can I use a lighting controller from another brand with the LUX SL180 strip?

No, the LUX SL180 light strip must be connected only to Lumishore Lux Strip Light Driver modules. Using third-party lighting control products or drivers is not recommended.

What is the power consumption per meter of this LED strip?

The power consumption of this LED strip is 5 watts per meter.

What is the required input voltage for the LUX SL180 LED strip?

The required input voltage for the Lumishore Strip Light LED strip is 23 to 25V. It must be used only with Lumishore Strip Light Driver modules.

Is the LED light bar UV-resistant and salt fog resistant?

Yes, the strip is made from a UV-resistant material and has been tested in salt spray for enhanced durability in marine environments.

Where should I not install the LUX SL180 LED strip?

The light strip must not be installed in areas exposed to direct sunlight.

Who should carry out the electrical and mechanical installation of the LED strip?

A qualified professional must perform the electrical and mechanical installation of the light strip.

What conditions could void the warranty on the LED strip?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations, including the use of third-party autopilots.