LUX SL180, Strip Light, CRGBW, 2700mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Garmin

010-04388-00

LUX SL180, bandă luminoasă, CRGBW, 2700mm

La bande lumineuse Garmin LUX SL180 CRGBW de 2700 mm offre un éclairage marin à spectre complet avec blanc tunable de 2700 K à 6500 K. Certifiée IP68 et résistante aux UV, elle s'intègre dans l'écosystème Lumishore LUX et est contrôlable via MFD compatibles (nécessite le centre de commande EOS-LUX). La bande est livrée avec un support adhésif 3M et des clips de fixation à visser.

Prix publicBénéficier du tarif pro

206,58€

206,58€ ~~229,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse
Tensiune de funcționare	23-25 V
Consum electric tipic	13.5 W
Culoare lumină	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	2.7
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Bend Axis Restriction	Vertical uniquement
Compatible Driver Module	Modules de pilote de bande lumineuse Lumishore LUX
Cuttable	Non
Fastener Spacing	25-30 cm
Mediu instalare	Intérieur, Extérieur, Zones humides
Minimum Bend Radius	50
Mounting Clip Material	Acier inoxydable
Consum electric pe metru	5 W/m
Warranty Duration	3 ans

Description détaillée

Concepută pentru iluminatul marin, banda luminoasă Garmin LUX SL180 CRGBW de 2700 mm oferă o soluție de iluminat cu spectru complet și reglare a culorii. Integrează LED-uri CRGBW (alb rece, roșu, verde, albastru, alb cald) și permite ajustarea temperaturii de culoare a albului de la 2700 K la 6500 K. Această flexibilitate permite crearea unor diferite atmosfere la bord.

Integrare și performanțe tehnice

Banda luminoasă LUX SL180 este special concepută pentru a funcționa cu modulele de control Lumishore LUX, asigurând compatibilitate și performanțe optime. Alimentarea se realizează printr-o tensiune de intrare de 10.5-31 VCC gestionată de un modul de control LUX, cu un consum mediu de 8.7 W/m. Produsul este complet capsulat și dotat cu un difuzor fără puncte vizibile, asigurând o distribuție uniformă a luminii. Cu un grad de protecție IP68, este potrivită pentru instalări interioare și exterioare, inclusiv zone umede, dar nu este destinată imersiei permanente.

Instalare și durabilitate marină

Instalarea benzii LUX SL180 este facilitată de un suport adeziv 3M. Pentru instalări exterioare, zone umede sau curbe strânse, se recomandă utilizarea de cleme de fixare cu șuruburi la fiecare 25-30 cm. Sunt disponibile și cleme metalice din oțel inoxidabil opțional pentru canalele de montaj înguste. Banda luminoasă este fabricată dintr-un material rezistent la UV și a fost testată în ceață salină. Are un rază de curbură de 50 mm pe axa verticală, iar îndoirea pe axa orizontală sau torsiunea sunt interzise. Banda este livrată în lungimi prefabricate și sigilate la fabrică pentru a respecta standardul IP68. Deși manualul de instalare indică să nu se taie banda, sunt furnizate informații suplimentare conform cărora aceasta poate fi tăiată la fiecare 100 mm cu condiția utilizării unui kit de etanșare cu adeziv siliconic și capete terminale, furnizat pentru menținerea etanșeității după tăiere. Garanția produsului este de trei ani.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation pour bande lumineuse LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Responsabil digital

« Garmin LUX SL180 marine ambient lighting: integration and CRGBW flexibility »

The Garmin LUX SL180 CRGBW light strip is a flexible and high-performance supplemental lighting solution for the interiors and exteriors of vessels. Its main advantage lies in its ability to provide full-spectrum CRGBW lighting with tunable white (2700 K to 6500 K), enabling advanced customization of onboard lighting ambiance. This versatility sets it apart from standard monochrome or simple RGB LED lights. It is particularly well-suited for decorative or discreet functional applications, such as lighting walkways, steps, lockers, or under-counter spaces, on mid-sized to large sailboats and motor yachts. Its low profile and UV resistance make it a relevant choice for exposed areas.

Regarding installation, it is critical to note that the LUX SL180 must be connected to Lumishore LUX light strip driver modules to operate and to validate the warranty. This means it is not a standalone "plug-and-play" solution compatible with any controller, but rather integrates into an existing or to-be-built Lumishore ecosystem. The 10.5–31 VDC input voltage is specific to these drivers. Adhering to the minimum 50 mm bending radius on the vertical axis is essential to avoid damaging the strip. The original installation guide advises against cutting the strip, as it is supplied in pre-fabricated and factory-sealed lengths to meet IP68 standards. Cutting the strip would void the warranty and compromise the IP68 rating for this specific model.

Compared to more generic marine lighting solutions, the LUX SL180 stands out for its deep integration into the Lumishore/Garmin ecosystem, offering advanced control options via compatible MFDs, Lumishore displays, or smart devices (requiring the EOS-LUX control hub). This ensures a consistent and centralized user experience. Its main limitations stem from this dependence on the Lumishore ecosystem, which may represent a higher upfront cost for a complete installation if the infrastructure is not already in place. It is not designed for intense primary lighting but excels in adding customizable aesthetic and functional touches.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă luminoasă, CRGBW, 2700mm

206,58€

206,58€ ~~229,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

TD 50, ecran tactil de 5"

Ref : 010-02139-10

507,24€

507,24€ ~~689,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SL180 light strip?

The Garmin LUX SL180 light bar has a length of 2700 mm.

What colors can this LED light strip produce?

The LUX SL180 light strip is equipped with CRGBW LEDs, meaning it can produce cold white, red, green, blue, and warm white colors. It provides full-spectrum lighting.

Is the LUX SL180 LED light bar waterproof?

Yes, the LUX SL180 LED strip is fully sealed and has an IP68 protection rating. This means it is suitable for indoor and outdoor installations, including in damp areas, but it is not designed for continuous immersion in water.

Is it possible to adjust the white color temperature?

Yes, the LUX SL180 LED strip allows adjustment of the white color temperature from 2700 K (warm white) to 6500 K (cool white), providing high flexibility to create different lighting moods.

Are the individual LED points visible on this LED light strip?

No, the LUX SL180 LED light strip features a diffuser with no visible hotspots, ensuring homogeneous and continuous light diffusion.

Can the LUX SL180 LED light strip be installed outdoors?

Yes, the LUX SL180 LED light strip is designed for outdoor installation thanks to its IP68 protection rating and UV-resistant material. However, it is recommended not to install it in areas exposed to direct sunlight.

What is the input voltage range for this LED strip?

The LUX SL180 light strip requires an input voltage of 23 to 25 V to operate. This power is managed by the Lumishore LUX light strip driver module, which itself can accept a voltage range of 10.5 to 31 VDC from the vessel's power source.

Is the material of the light strip UV-resistant?

Yes, the LUX SL180 LED light strip is made from UV-resistant material.

How to install the LUX SL180 LED strip?

Installation of the LUX SL180 light strip is made easier by a pre-applied 3M adhesive backing. For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical mounting clips in addition to the adhesive.

Is it possible to cut the light strip to fit a shorter length?

No, the LUX SL180 LED light strip is supplied in predefined lengths and factory-sealed to meet IP68 standards. It is imperative not to cut the light strip, as this would void the warranty and compromise its waterproofing.

What is the minimum bend radius for the LED strip?

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis only. Do not bend it on the horizontal axis or twist it.

Are there specific recommendations for outdoor installation or in wet areas?

For outdoor installations in humid areas or with tight bend radii, it is strongly recommended to use mechanical fasteners (clips) in addition to the 3M adhesive layer to ensure optimal and durable holding. These fasteners should be placed every 25 to 30 cm and/or on each side of a bend.

What precautions should be taken before starting the electrical installation?

Before any installation, always ensure that the vessel's power source and battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

Should pressure be applied to LEDs during installation?

No, do not apply pressure to the LED area during installation. Press only the edges of the light strip to secure it in place.

How long should you wait after installation before turning on the light strip?

It is recommended to let the 3M adhesive cure for 24 hours after installation before turning on the LED strip, to ensure optimal and durable adhesion.

Are mounting clips required and how should they be used?

Mounting clips are optional but recommended for outdoor installations, wet areas, or tight bend radii. They can be used in addition to 3M adhesive. For narrow mounting channels, stainless steel metal clips can be provided. To install them, gently open the clips, insert the light strip, then gently tighten them around the strip.

Can I bend the light strip horizontally or twist it?

No, the LED strip must be bent only along the vertical axis, with a minimum radius of 50 mm. It is essential not to bend it along the horizontal axis or twist it, as this could damage the product and void the warranty.

What equipment is required to operate the LUX SL180 light strip?

The LUX SL180 LED strip is specifically designed to work with Lumishore LUX LED strip modules. It requires connection to these modules for optimal performance and compatibility.

Is the LUX SL180 light bar compatible with third-party lighting control systems?

No, the LUX SL180 LED strip is designed to be used only with Lumishore LUX LED strip controller modules. Connection to other third-party lighting products or controllers is not supported and will void the warranty.