LUX SNL180, Superbright Neon Flex Strip Light, 2200mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 12%

Garmin

010-04429-00

LUX SNL180, bandă Neon Flex Superbright, 2200 mm

La bande lumineuse néon flex Garmin LUX SNL180 de 2200mm est une solution d'éclairage marin Superbright avec 180 LEDs/m, offrant un spectre CRGBW complet et un blanc tunable de 2700K à 6500K. Certifiée IP67 et résistante aux UV et au brouillard salin, elle assure une illumination homogène sans points visibles. Elle est conçue pour fonctionner exclusivement avec un module de pilote Lumishore LUX dédié et s'installe via les clips en acier inoxydable fournis.

Prix publicBénéficier du tarif pro

175,43€

175,43€ ~~199,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse flexible
Tensiune de funcționare	10.5 à 31 VDC
Consum electric tipic	19.14 W
Culoare lumină	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Indice IP	IP67
Variator compatibil	Oui
Lungime bandă	2.2
Densitate LED-uri / metru	180.0
Construction Type	Entièrement encapsulée et potée
Direct Sunlight Exposure	Non
Mediu instalare	Intérieur,Extérieur,Au-dessus de la ligne de flottaison
Installation Requirement	Installation par un professionnel qualifié
Max Current Consumption Per Meter 12v	0.6
Max Current Consumption Per Meter 24v	0.36
Max Strip Length Per Driver	10
Consum electric pe metru	8.7
Required Driver Module	Module de pilote de bande lumineuse LUX Lumishore
Rezistență UV	Oui

Description détaillée

Proiectată pentru iluminatul marin, banda luminoasă neon flex Garmin LUX SNL180 de 2200 mm oferă o soluție de iluminare Superbright cu funcții avansate. Integrează 180 de LED-uri pe metru, furnizând un spectru complet CRGBW (alb rece, roșu, verde, albastru, alb cald) cu o temperatură de culoare albă reglabilă între 2700K și 6500K, totul într-o singură bandă flexibilă. Indicele său de protecție IP67 o face potrivită pentru instalații interioare și exterioare, deasupra liniei de plutire.

Performanțe tehnice și integrare în sistem

LUX SNL180 se remarcă prin iluminatul său „dot-free”, obținut printr-un strat de difuzie care amestecă lumina LED-urilor pentru un efect uniform, spre deosebire de benzile LED standard. Această flexibilitate permite adaptarea la suprafețe curbate, facilitând instalarea sub pavăzi, plafonierele cabinei sau T-tops. Este alimentată exclusiv printr-un modul de control dedicat benzii luminoase LUX, suportând o tensiune de intrare de 10.5 până la 31 VCC prin intermediul modulului de control LUX, cu un consum maxim de 0.6 A/m sub 12 V și 0.36 A/m sub 24 V. Puterea medie absorbită este de 8.7 W/m. Fiecare modul de control poate gestiona până la 10 metri de bandă în total. Construcția sa este complet incapsulată și etanșată, asigurând rezistență la UV și ceață salină.

Instalare și durabilitate

Instalarea LUX SNL180 se realizează cu ajutorul clipsurilor din oțel inoxidabil furnizate, fixate cu șuruburi. Banda este proiectată pentru a fi îndoită doar pe axa laterală, cu un raza minimă de curbură de 120 mm, și nu trebuie îndoită pe axa verticală sau răsucită. Lungimile sunt sigilate la fabrică pentru a respecta standardul IP67 și nu trebuie tăiate. Această bandă beneficiază de o garanție de 3 ani. Poate fi controlată printr-un întrerupător momentan sau integrată în ecrane multifuncționale (MFD) compatibile prin intermediul centrului de comandă EOS-LUX pentru un control complet CRGBW și reglarea precisă a culorii albe, oferind opțiuni de reglare a intensității luminoase standard.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation Lumière flexible LUX SNL180 2200mm

Avis de l'expert

« Technical analysis: Garmin LUX SNL180 neon flex light strip »

The Garmin LUX SNL180 is a marine lighting solution worth considering for boat owners seeking refined aesthetics and advanced functionality. Its main added value lies in its "dot-free" rendering, which provides a continuous, uniform light line—a clear visual advantage over classic LED strips where individual light points are often visible. This feature makes it particularly suitable for applications where lighting is directly exposed, such as under guardrails, handrails, or to highlight interior architectural contours.

Regarding installation, it is critical to note that the SNL180 requires the use of a dedicated Lumishore LUX driver module. This dependency limits flexibility when integrating with third-party lighting systems but, in return, ensures optimized power management and enhanced protection against voltage fluctuations, contributing to the product's longevity. The fact that the strip is supplied in fixed lengths and cannot be cut simplifies installation for standard lengths but necessitates precise planning of requirements. The minimum bending radius of 120mm and the prohibition against bending along the vertical axis are mechanical constraints that must be factored into the lighting layout design. Using two people for lengths exceeding 1 meter is a practical recommendation to avoid damaging the strip.

Although rated IP67 and resistant to UV rays and salt spray, it is essential to note that this product is not designed for permanent submersion. It is therefore ideal for damp areas exposed to spray but not for underwater use. Its ability to offer a full CRGBW spectrum with tunable white, combined with potential integration with MFDs via an EOS-LUX Command Center, provides lighting ambiance customization possibilities far beyond what many competing solutions offer. This product is thus suited for new installations or demanding renovations that can integrate the Lumishore/Garmin ecosystem for a consistent and high-performance user experience.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SNL180, bandă Neon Flex Superbright, 2200 mm

175,43€

175,43€ ~~199,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SNL180 light bar?

The Garmin LUX SNL180 light strip measures 2200mm in length. It is important to note that it is supplied in pre-cut, factory-sealed lengths and must not be cut under any circumstances.

What are the available lighting color options for this LED strip?

This LED strip provides a full CRGBW spectrum, including cool white, red, green, blue, and warm white. Additionally, the white color temperature is fully adjustable, ranging from 2700K to 6500K.

Is the LUX SNL180 LED strip suitable for outdoor marine use?

Yes, the LED strip is designed with an IP67 protection rating, making it perfectly suitable for indoor and outdoor installations on a boat, specifically above the waterline. However, it is not designed to be permanently submerged in water.

What is "dot-free" illumination and what is its advantage?

The "dot-free" illumination (no visible light points) means the light strip delivers a perfectly uniform light output, with no individual LED points visible. This is achieved using a diffusion layer that blends the LED light, providing more uniform and aesthetic lighting than standard LED strips.

How many LEDs per meter are in the LUX SNL180 LED strip?

The Garmin LUX SNL180 LED strip integrates 180 LEDs per meter, contributing to its Superbright illumination and uniform light output.

Is the light strip flexible to adapt to curved surfaces?

Yes, the LED strip is designed to be flexible and adapt to curved surfaces. It has a minimum bending radius of 120mm, but it is crucial to bend it only along the lateral axis and not to twist or bend it along the vertical axis to avoid any damage.

Is the LED light strip UV-resistant?

Yes, the LED light strip is made from UV-resistant material. However, to optimize its lifespan and performance, it is recommended not to install it in areas exposed to strong direct sunlight.

Can I cut the LUX SNL180 LED strip to adjust its length?

No, it is essential not to cut the LUX SNL180 light strip. It is supplied in factory-sealed prefabricated lengths to ensure compliance with IP67 standards. Cutting it would void these certifications as well as the product warranty.

How to install the LED strip on a surface?

The LED strip is installed using the supplied stainless steel clips. These clips must be screwed into place with appropriate screws. Once the clips are secured, the flexible neon strip is simply pushed into place until an audible "click" confirms it is properly locked in. It is recommended to use multiple clips around tight curves to ensure a good fit and prevent the strip from lifting.

Are there any precautions to take when folding the LED light strip?

Yes, the LED strip can only be bent laterally, with a minimum bending radius of 120mm. It is critical not to bend it along the vertical axis or twist it, as this could damage the internal LEDs and void the warranty.

Should I disconnect the boat's power supply before installing the LED light strip?

Yes, it is imperative to always ensure that the vessel's power source and the battery are disconnected or isolated before proceeding with any electrical installation to guarantee your safety and that of the system.

Is it recommended to hire a professional for the installation?

Yes, it is strongly recommended that a qualified professional performs the electrical and mechanical installation of the LED strip. This ensures correct, safe installation and compliance with technical specifications.

How to handle the light bar during installation to avoid damage?

To avoid damaging the tape, always unroll it carefully along its entire length and do not drop it or twist it. For lengths over one meter, it is recommended to use two people: one for installation and another to hold and unroll the tape. Do not apply excessive pressure, pull, stretch, twist, or bend the tape along the vertical axis.

What equipment is required to power and control the LUX SNL180 LED light strip?

The LUX SNL180 LED strip must be used exclusively with Lumishore’s dedicated LED strip control modules. It is not compatible and must not be connected to other lighting control products or third-party controllers.

Can a single LUX autopilot module control multiple light strips?

Yes, each LUX autopilot module is designed to control up to 10 meters of LED strip in total. If you need to install more than 10 meters, additional autopilot modules will be required.

Does using an autopilot other than the recommended one affect the warranty?

Yes, using the LUX SNL180 light bar with third-party autopilots, other than Lumishore's dedicated light bar autopilot module, will void the product warranty.

What is the warranty duration for the Garmin LUX SNL180 LED light bar?

Lumishore Ltd, the manufacturer, warrants its lighting systems and associated accessories against manufacturing defects for a period of three years from the original purchase date.

Which actions can void the warranty on the LED strip?

The warranty may be voided in case of misuse or abuse, incorrect installation or negligence, damage caused by disasters (fire, flood, storm, lightning), installation by unqualified personnel, unauthorized repair or modification, non-compliance with all installation, maintenance, and usage instructions specified in the manual. Using third-party autopilots not approved by Lumishore will also void the warranty.