Prelungitor ultra-rezistent pentru sondă (9 m, 8 pini)

This extension cable is designed to extend the range of your Garmin transducer cable, allowing greater flexibility in positioning the transducer on your boat and connecting it to your display unit. It is particularly useful when the distance between the transducer and the display device exceeds the length of the transducer's original cable.

This extension has a length of 9 meters (or 30 feet).

The "ultra-robust" designation indicates that this extension is made with high-quality materials and a reinforced design to withstand marine environment stresses. This includes improved resistance to abrasion, twisting, weathering, saltwater, and UV rays, ensuring enhanced durability and long-term signal integrity.

Yes, as a Garmin product designed for the marine environment and described as "ultra-robust", this cable is specifically manufactured to withstand saltwater corrosion and degradation caused by prolonged exposure to ultraviolet (UV) rays.

Yes, this extension is an original Garmin product. Using brand accessories ensures perfect compatibility and optimal performance with your Garmin equipment.

Yes, the 8-pin connectors on this extension are designed to be watertight when properly connected and tightened to compatible sockets on your Garmin transducer and display. It is essential to ensure that connections are clean and securely fastened to maintain watertight integrity.

Yes, the "ultra-robust" design of this extension makes it suitable for marine environments where vibrations may be frequent. Its materials and construction are designed to maintain signal integrity even under mechanical stress. However, it is recommended to secure the cable properly to minimize excessive movement.

Although designed to be robust, the extension cable retains sufficient flexibility to make it easier to route through the conduits and confined spaces of a boat. Its suppleness allows for easier installation while maintaining durability.

This extension is compatible with Garmin fishfinders that use an 8-pin connector. To confirm compatibility, it is recommended to check the connector type of your current fishfinder or consult the user manual of your Garmin fishfinder.

Yes, this extension is compatible with many traditional Garmin CHIRP sounders (2D) that use an 8-pin connector. Ensure your transducer’s connector matches the 8-pin type of this extension.

Yes, this extension cable is designed to be connected between your 8-pin Garmin transducer and your Garmin display (fishfinder/GPS) with an 8-pin transducer input. It allows extending the distance between the two devices.

No, this extension cable is specifically designed for Garmin equipment and uses an 8-pin proprietary connector. It is not recommended for use with transducers or devices from other brands, as this could cause compatibility issues, performance problems, or even damage the equipment.

To check compatibility, inspect the connector on your Garmin transducer. If it is an 8-pin round connector, then this extension cable should be compatible. You may also refer to your transducer's user manual or Garmin's technical specifications on their website to confirm the required connector type.

Garmin's official extension cables are designed to minimize any signal loss. For a 9-meter length, the impact on the depth sounder's signal quality is generally negligible and should not affect the fishfinder's performance under normal operating conditions, provided the connections are clean and secure.

Compatibility depends on the specific model of your ClearVü or SideVü transducer. Some ClearVü/SideVü transducers use an 8-pin connector (often combined with a traditional transducer), while others, more recent or advanced models, may require a 12-pin connector. Check your transducer's connector type to ensure compatibility.

Garmin does not generally recommend using multiple extension cables connected in series. While technically possible, this can increase cable resistance and potentially degrade the transducer signal quality, especially over very long distances. It is better to use a single extension cable of the appropriate length.

No, installing this extension typically does not require any specific tools. Garmin connectors are designed to be hand-tightened, ensuring a secure and watertight connection. Simply ensure the threads are clean and the O-rings are in place and undamaged.

Yes, during installation, ensure you do not excessively bend or pinch the cable, as this could damage the internal conductors. Protect the connectors from dirt and moisture while routing the cable. Secure the cable along its path to prevent snagging or unnecessary stress, and ensure connections are tightly secured to maintain waterproof integrity.

To ensure a watertight connection, thoroughly clean the connectors before assembly. Firmly screw the extension connectors onto the transducer and the display until they are hand-tight. Garmin connectors are designed with internal O-rings that ensure a watertight seal once properly assembled. Avoid using tools to overtighten, as this could damage the threads.

No, it is strongly discouraged to cut, splice, or modify the length of this extension cable. Depth sounder cables are coaxial cables with a specific impedance that is crucial for proper signal transmission. Any modification could alter the impedance, significantly degrade the depth sounder signal quality, and void the product warranty.