STRIKER™ Vivid 7cv cu sondă GT20-TM

The GT20-TM transducer supplied with the STRIKER Vivid 7cv can be installed in two main ways:

On the transom (Transom Mount): This is a common method that allows the transducer to be immersed directly in clean water behind the boat. On an electric trolling motor (Trolling Motor Mount): This option is ideal for anglers using an electric trolling motor, allowing the transducer to move with the motor for better coverage. The necessary mounts for both types of installation are included with the product, giving you maximum flexibility.

No, it is strongly discouraged to cut the cable of the GT20-TM transducer. Cutting the cable voids the warranty of your Garmin product. If the cable is too long, it is recommended to coil it carefully and secure it to prevent tangling or damage, while following routing precautions to avoid electrical interference.

For a flush-mounted installation of the STRIKER Vivid 7cv display, the required cutout in your boat’s mounting surface should measure approximately 218.3 mm in width and 89 mm in height. It is always recommended to use the mounting template provided in the product box to ensure precise cutting and avoid errors.

Yes, the STRIKER Vivid 7cv can share data with other compatible Garmin devices. To do this, you will need to use the blue and brown wires of the power/data cable. This feature is useful for expanding your navigation and fish-finding system with additional ECHOMAP™ or STRIKER units.

To avoid any interference with the operation of a magnetic compass, the STRIKER Vivid 7cv must be installed at a minimum distance of 40 cm (15.75 inches) from it. Respecting this distance ensures the accuracy of your compass and the proper functioning of your navigation instruments.

If your boat spends a significant amount of time in the water, it is recommended to apply antifouling paint to the GT20-TM transducer and its mounting accessories to prevent marine growth. It is imperative to use water-based antifouling paint. Never use acetone or acetone-based products on the transducer, as this could damage its plastic housing.

To ensure optimal performance and reduce noise or interference, the transducer cable must be routed away from sources of electrical interference. This includes:

Ignition wires.Battery and boat service wiring.Electric motor batteries and wiring.High-energy wires, such as those for radar, audio amplifiers, and autopilot pumps.Also avoid sharply pinching or bending the cable to prevent damage.

The STRIKER Vivid 7cv requires a 12 Vdc power supply. To protect the device and your boat's electrical circuit, a 3.0 A fuse is required on the power circuit.

The Garmin STRIKER Vivid 7cv is a fishfinder/chartplotter with a 7-inch color display. It features ClearVü™ technology, enabling clear and detailed sonar images of underwater structures and fish. It also offers high-visibility color palettes for improved sonar return interpretation.

The Garmin STRIKER Vivid 7cv comes with the GT20-TM transducer. This transducer is versatile and supports both traditional CHIRP sonar and ClearVü™ scanning sonar. It is designed to be mounted on the transom or on an electric motor.

The STRIKER Vivid 7cv requires a 12 Vdc power supply. It is important to use a 3.0 A fuse to protect the device.

The STRIKER Vivid 7cv can be mounted using a mounting bracket. Options are available for a fixed mount or a swivel mount, allowing you to orient the display according to your preferences. A flush-mount template is also available, but it is recommended to use the one provided in the product box for precise fitting.

The GT20-TM transducer is designed to be installed in two main ways:

On the transom of your boat.On the electric motor of your boat.These two options provide flexibility to suit different types of vessels and fishing preferences.

To ensure optimal performance and minimize noise and interference, it is critical to route the transducer cable away from the following:

Ignition wires.Batteries and service wiring.Electric motor batteries and wiring.High-energy wires such as those from the radar, audio amplifier, and autopilot pump.In addition, avoid pinching the cable or bending it too sharply.

No, it is strongly discouraged to cut the cables of the transducer, as this would void the warranty of your product. It is important to route the cables as they are.

For installing the transducer on the transom, you will need the following tools:

A Phillips screwdriver #2. A drill. 4 mm (5/32 in), 3.2 mm (1/8 in), and 25 mm (1 in) drill bits. Masking tape. Marine sealant. For installation on an electric motor, waterproof tape (not included) is also required.

Yes, the STRIKER Vivid 7cv can share data with other Garmin ECHOMAP™ or STRIKER™ devices. This is done via the blue and brown wires of the device's wiring.

Yes, it is necessary to update the software of your Garmin chartplotter when installing this device. You can find the instructions for updating the software in the user manual of your chartplotter on support.garmin.com.