TD 50, ecran tactil de 5"

The Garmin TD 50 is not a standalone chartplotter. It is a remote display and control screen that must be connected to one or more compatible Garmin chartplotters via the Garmin Marine Network. Without this connection, the unit will not operate.

The Garmin TD 50 display can show a wide range of navigation and engine data from the NMEA 2000 network. This includes:

Vessel speed and water depthHeading and rudder angleEngine parameters (RPM, temperature, etc.)Battery statusWind data, temperature, and humidityNavigation information (heading, cross-track error, etc.)It can also control compatible systems via the EmpirBus network.

Yes, the Garmin TD 50 is fully compatible with the NMEA 2000 protocol. It can receive and display data from sensors and instruments connected to this network, such as depth sounders, wind transducers/vane anemometers, or navigation displays. It supports a long list of standard NMEA 2000 PGNs.

The Garmin TD 50’s touchscreen offers a brightness of 1200 cd/m² (NITS). This high brightness makes it perfectly readable, even in full sunlight on a boat. The screen is also treated with an anti-reflective and anti-fingerprint coating for better visibility.

The Garmin TD 50 has an IPX7 protection rating according to IEC 60529. This means it is protected against accidental immersion in water up to 1 meter deep for 30 minutes. It is therefore perfectly suited for use in a marine environment.

Yes, the Garmin TD 50 is compatible with the EmpirBus system. This feature allows you to remotely control and monitor various boat electrical equipment, such as navigation lights, bilge pumps, or interior lighting, directly from the touchscreen.

The dimensions of the Garmin TD 50 vary depending on whether it is equipped with its sun cover or not:

With the sun cover: 113 x 144 x 56 mm (4.45 x 5.67 x 2.20 in)Without the sun cover: 105 x 140 x 51 mm (4.13 x 5.51 x 2.01 in)

The Garmin TD 50 is designed for flush mounting on the dashboard. The procedure is as follows:

Use the cutting template provided in the box to mark the cut-out area.
Cut the opening carefully using a hole saw or jigsaw.
Drill pilot holes (2.5 mm) for the included wood screws.
Secure the unit using the supplied screws.
It is strongly recommended to use the provided paper template and not to print it yourself to avoid dimension errors.

The maximum power consumption of the Garmin TD 50 is 5.85 W. Its input voltage on the NMEA 2000 network ranges from 9 to 16 Vdc. It has a Load Equivalency Number (LEN) of 13, corresponding to a consumption of 650 mA at 9 Vdc.

The Garmin TD 50 is designed to operate on the Garmin Marine Network. It is compatible with Garmin chartplotters that use this same network. For guaranteed compatibility, it is advisable to check that your Garmin chartplotter has a Garmin Marine Network port. Recent series such as GPSMAP are generally compatible.

The Garmin TD 50 screen is protected by a glass treated with an anti-reflective and anti-fingerprint coating. This reduces sunlight glare for better readability and minimizes fingerprints on the touchscreen.

The Garmin TD 50 operates within a temperature range of -15°C to 55°C (5°F to 131°F). It is critical not to use the device outside this range to ensure proper operation and longevity.

To avoid any magnetic interference, the Garmin TD 50 must be installed at a safe distance of at least 20 cm (7.87 inches) from any magnetic compass. This distance is referred to as the "compass-safe distance".

Yes, the Garmin TD 50 is explicitly compatible with the EmpirBus system. This integration allows you to control and monitor the status of many boat electrical systems directly from the TD 50’s touchscreen.

The weight of the Garmin TD 50 varies depending on whether it is equipped with its solar protection cover:

Without the solar cover: 328 g (11.57 oz)With the solar cover: 375 g (13.23 oz)

Yes, the Garmin TD 50 can display engine parameters if it is connected to an NMEA 2000 network. It supports PGNs dedicated to engine data, such as engine speed (PGN 127488) and dynamic data (PGN 127489). You will be able to view engine speed, temperature, oil pressure, and other information.

The Garmin TD 50 housing is made of fully-gasketed polycarbonate. This material is robust and designed to withstand vibrations and harsh marine conditions. It is essential that the mounting surface is sufficiently solid to support the device and protect it from excessive shocks.