BP-296 BATERIE Li-Ion 3,6V 2350mAh

The BP-296 battery provides a capacity of 2350 mAh, which restores the original autonomy and performance of your marine VHF radio.

This battery uses Lithium-Ion (Li-Ion) technology, known for its high reliability, long lifespan, and lack of memory effect.

The nominal voltage of the ICOM BP-296 battery is 3.6 V. It is perfectly calibrated to meet the power requirements of your equipment.

Yes, the BP-296 is an official spare part manufactured by ICOM. It ensures maximum safety and optimal performance for your communication equipment.

No, thanks to its Lithium-Ion technology, this battery is not subject to any memory effect. You can recharge it at any time, even if it is not fully discharged, without reducing its maximum capacity.

To extend the life of your battery, avoid fully discharging it repeatedly. If you won't use it for an extended period, store it in a cool, dry place at around 50% charge.

Yes, it is strongly recommended to charge the BP-296 battery to 100% before using it for the first time to optimize and calibrate its internal cells.

The battery is designed to be installed inside the VHF radio. Correct assembly of the radio housing and proper positioning of the seals during installation ensure the device's overall waterproofing.

New Li-Ion batteries are usually delivered with a partial factory charge (around 30 to 50%) for safety reasons during storage. A full charge is required before going to sea.

A standard Phillips screwdriver of the correct size for the screws on the rear cover of your ICOM IC-M25 VHF radio is sufficient to access the battery compartment and replace the battery.

Lithium-ion batteries contain chemical components that must not be disposed of with household waste. Please return your old battery to a designated collection point for recycling.

Once the battery is connected and the cover properly closed, turn on your VHF. If the screen lights up correctly and displays the battery level icon, the installation is successful.