Kit de montaj încastrat MB-132

The Icom MB-132 flush-mount kit is a mounting accessory designed for flush installation of Icom marine VHF stations on a dashboard or bulkhead. It allows direct integration of the radio into the helm console, providing a clean finish.

The MB-132 kit is used to integrate your Icom fixed VHF in an aesthetic and functional way into your helm console. It replaces the traditional bracket mounting, providing a flush finish and reducing the device's footprint at the helm station.

Using the MB-132 kit offers several advantages:

A flush and aesthetically integrated installation in the console. A reduction in the physical footprint of the VHF at the helm station. Enhanced protection of the radio's chassis against mechanical shocks or accidental snags. Maintaining the watertight standards of the radio's front panel.

Yes, the MB-132 flush-mount kit is an Icom accessory designed specifically for their marine VHF radiotelephones.

No, the MB-132 flush-mount kit is a separately sold accessory. It is designed to be used with compatible Icom fixed VHF radios, which are not included.

The MB-132 flush-mounting kit is strictly compatible with the following Icom fixed VHF models:

IC-M323IC-M423GEIC-M506

No, the MB-132 kit is not compatible with the IC-M330GE model. The IC-M330GE uses a different flush-mount kit, the MBF-5.

No, the MB-132 kit is not suitable for the IC-M510E model. The IC-M510E requires a specific flush-mount kit, the MBF-7.

No, the MB-132 flush-mount kit is developed exclusively for compatible Icom VHF radios. Its threading and mounting tabs are specific to these units, ensuring optimal structural rigidity.

No, the MB-132 kit is not compatible with all Icom fixed VHF radios. It is specifically designed for certain compact models, such as the IC-M323, IC-M423GE, and IC-M506. It is important to check your VHF model's compatibility before purchasing.

The MB-132 kit is secured by a clamping system operated from the rear of the console. This mechanism ensures uniform pressure of the radio face against the cutout wall, guaranteeing solid mounting.

Yes, installing the MB-132 kit requires making a precise cut in your dashboard or console partition to recess the VHF and the kit.

The available information does not specify whether a cutting template is included. It is recommended to refer to the installation manual of your Icom VHF compatible for the exact dimensions of the required cutout.

Installing the MB-132 flush-mount kit for your Icom VHF radio involves several key steps to ensure a seamless and secure integration:

Surface preparation: The first step is to cut a precise opening in the dashboard or bulkhead of your boat. This cutout must match the exact dimensions of the compatible Icom VHF radio housing and the MB-132 kit for a perfect fit.

VHF insertion: Once the cutout is made, the VHF radio is inserted from the front into the prepared opening.

Secure fastening: The MB-132 kit is then positioned and used to tighten and firmly secure the VHF from the rear of the console. This rear-mounted clamping mechanism ensures uniform pressure on the radio's front panel, keeping it flush with the dashboard surface and maintaining the panel's waterproofing standards (up to IPX8 depending on the installed VHF model), thus protecting the cockpit interior from water or spray ingress.

This mounting method provides a built-in, aesthetic finish, distinct from a standard bracket-mounted installation.

Although specific tools are not listed, installing a flush-mount kit typically requires measuring tools (tape measure, pencil), cutting tools (jigsaw or rotary tool), and fastening tools (screwdriver).

Yes, the MB-132 kit is designed to lock compatible Icom VHF radios, ensuring optimal structural rigidity against marine vibrations, thereby protecting your VHF.

The MB-132 kit offers flush or surface-mounted installation. This means the VHF is integrated directly into the dashboard or bulkhead surface, with only its front panel visible.