ActiveImaging™ HD 3-în-1 (M/H) - SideScan Fish Reveal

The Lowrance ActiveImaging™ HD 3-in-1 transducer integrates multiple advanced imaging technologies for detecting fish and underwater structures:

CHIRP sonar with medium and high frequencies.SideScan HD imaging for detailed side views.DownScan HD imaging for exceptionally clear views beneath the boat.The FishReveal™ feature, available for DownScan and SideScan, overlays CHIRP fish arches on DownScan or SideScan images.

This transducer’s CHIRP sonar operates on two frequency ranges:

83 kHz for CHIRP medium. 200 kHz for CHIRP high.

The DownScan technology of the ActiveImaging™ HD transducer uses the following CHIRP frequencies for high-definition imaging below the boat:

700 kHz CHIRP, 1200 kHz CHIRP.

For SideScan HD side imaging, this transducer uses the following CHIRP frequencies:

455 kHz CHIRP. 1075 kHz CHIRP.

In CHIRP Sonar mode (83 kHz/200 kHz), the ActiveImaging™ HD 3-in-1 transducer can reach a maximum depth of 305 meters.

Depth and range capabilities for DownScan and SideScan imaging are as follows:

DownScan: Up to 46 metres at 700 kHz. Up to 27 metres at 1200 kHz. SideScan: Lateral range up to 91 metres at 455 kHz. Lateral range up to 46 metres at 1075 kHz.

The FishReveal™ function combines traditional CHIRP fishfinder data with high-resolution DownScan or SideScan imaging. It overlays clear fish arches from the CHIRP onto the detailed DownScan or SideScan views, making fish identification significantly easier compared to underwater structures.

The FishReveal DownScan is available directly on HDS PRO displays. The FishReveal SideScan requires the addition of the S3100 module (sold separately).

The ActiveImaging™ HD 3-in-1 transducer comes with a 7.6-metre (25-foot) cable.

The weight of the ActiveImaging™ HD 3-in-1 transducer (SKU: 000-16060-001) is 1.2 kg (2.64 lbs).

The ActiveImaging™ HD transducer is designed to operate within an extended temperature range:

Operating temperature: From -15 °C to +55 °C (from +5 °F to +131 °F).Storage temperature: From -30 °C to +70 °C (from -22 °F to +158 °F).

To achieve optimal performance from the transducer, the recommended maximum operating speeds are:

For CHIRP sonar (high-speed bottom tracking): up to 48 knots (55 mph). For DownScan and SideScan technologies (detailed imaging): up to 9 knots (10 mph).

The ActiveImaging™ HD 3-in-1 transducer provides multiple essential data types for navigation and fishing:

CHIRP sonar data. Detailed SideScan imaging. High-resolution DownScan imaging. Water temperature.

This transducer is designed to be installed in multiple ways to suit your boat's configuration. Possible mounting options include transom mounting and hull mounting.

The mounting kit included with the transducer contains the following items:

3 mounting screws for the transom (#10 x 1-1/4"). 3 flat washers #10 for the transom mounting screws. 2 clamp assembly bolts, flange head M6. 2 M6 flange nuts for clamp assembly. 6 transducer mounting screws M4. 6 M4 mounting washers for the transducer. 2 cable ties, to secure the cable if necessary.

For the installation of the transducer, the following tools and supplies (not included) are required:

A drill.A 3 mm (1/8") drill bit.A Phillips screwdriver.A high-quality marine adhesive/sealant for below the waterline applications.Two 10 mm wrenches.

For running the depth sounder cable through the hull or transom, a 26 mm hole diameter is recommended.

The FishReveal DownScan function of this transducer is directly compatible and available on Lowrance HDS PRO displays, allowing CHIRP fish arches to be overlaid on DownScan imaging.

Yes, to use the FishReveal SideScan function with this transducer, the S3100 module must be added. This module is sold separately.

The ActiveImaging™ HD 3-in-1 transducer is equipped with a 9-pin connector, ensuring a reliable connection to your compatible device.

Yes, this transducer can be mounted on an aluminum hull. However, to prevent corrosion between the mounting bracket and the aluminum hull, it is essential to use a plastic insulating material, such as King StarBoard®, between the two surfaces. M5 metal screws are also recommended for this type of installation.