ECLIPSE SMX54, Single Light Surface Mount, Blue and White - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 6%

Garmin

010-04505-00

ECLIPSE SMX54, proiector subacvatic bicolor albastru și alb

Conçu pour les navires jusqu'à 15m, l'éclairage sous-marin Lumishore ECLIPSE SMX54 offre un éclairage bicolore bleu et blanc de 7500 lumens (blanc) avec un angle de faisceau de 90°. Ce luminaire à montage en surface, doté d'un boîtier en bronze marin et d'une lentille en verre borosilicate, bénéficie d'une protection IP68. Il est livré avec 3 vis de montage en bronze marine et s'intègre facilement via interrupteur, ECLIPSE Command Center ou SUPRA i-Connect Hub pour un contrôle MFD ou smartphone.

Prix publicBénéficier du tarif pro

493,78€

493,78€ ~~529,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Éclairage sous-marin
Tipul instalației	Montage en surface
Interval de tensiune de funcționare	10.5-31
Consum electric tipic	71
Flux luminos	16875.0
Unghi de fascicul	90.0
Culoare lumină	Bleu; Blanc
Diametru exterior	95.0
Material carcasă	Bronze marin
Culoare / finisaj	Bronze
Indice IP	IP68
Control Methods	Interrupteur ON/OFF simple, Eclipse Command Center, SUPRA i-Connect Hub & Switch
Fixture Lumens White Mode	7500
Material lentilă	Verre borosilicate
Max Current Consumption 12v A	5.9
Max Current Consumption 24v A	2.8
Max Mounting Depth Mm	300
Max Vessel Length Ft	50
Max Vessel Length M	15
Min Mounting Depth Mm	100
Tipul suprafeței de montaj	Plat

Description détaillée

Lumishore ECLIPSE SMX54 este un proiector subacvatic bicolor (albastru și alb) cu montare la suprafață, proiectat special pentru nave cu lungimea maximă de 15 metri (50 picioare). Oferă o putere luminoasă de 7 500 lumeni în modul alb și un total de 16 875 lumeni, cu un unghi de fascicul larg de 90°. Funcționează pe o plajă de tensiune de 10,5 până la 31V CC (12V/24V CC nominal), consumând maxim 5,9 A sub 12V și 2,8 A sub 24V, cu o putere medie de 71 W.

Concepție și Durabilitate

Construcția SMX54 include un corp din bronz naval și o lentilă din sticlă borosilicată, asigurând rezistență în medii marine. Indicele de protecție IP68 garantează etanșeitatea totală împotriva prafului și imersiunii prelungite. Această robustețe este similară cu cea a celorlalte lumini subacvatice din gama Lumishore, asigurând durabilitate în condiții dificile.

Opțiuni de Control și Integrare

Lumishore ECLIPSE SMX54 oferă flexibilitate de control cu mai multe opțiuni. Poate fi gestionat printr-un simplu întrerupător pornire/oprire pentru moduri de bază (alb la pornire, apoi albastru, stroboscopic, efect de trecere ciclică). Pentru o integrare avansată, este compatibil cu ECLIPSE Command Center sau un SUPRA i-Connect Hub & Switch. Aceste sisteme permit controlul printr-un ecran multifuncțional (MFD) compatibil sau chiar prin smartphone/tabletă datorită conectivității Wi-Fi® (cu ECLIPSE Command Center sau un SUPRA Bridge și un SUPRA Hub). Această versatilitate îl poziționează avantajos față de soluțiile concurente care oferă opțiuni de control mai limitate.

Instalare Simplificată

Instalarea SMX54 este de tip montare la suprafață, simplificând procesul comparativ cu luminile prin carenă. Este furnizat cu trei șuruburi din bronz naval pentru montare. Proiectorul este proiectat pentru a fi montat pe o suprafață plană a pupa sau a bordajului lateral, ideal între 100 și 300 mm sub linia de plutire minimă pentru o iluminare optimă. Un kit de izolare (39-0203) este necesar pentru bărcile cu carenă conductivă, asigurând protecție împotriva coroziunii galvanice. SMX54 reprezintă o alternativă mai puțin intruzivă decât gamele Lumishore ORA sau EOS, care necesită găuri mai mari în carenă.

Documentations

Type	Nom
	Notice d'installation - Manuel d'installation ECLIPSE SMX54, montage en surface, bleu et blanc

Avis de l'expert

«
Lumishore ECLIPSE SMX54 underwater lighting: technical analysis and integration scenarios
»

Choosing the Lumishore ECLIPSE SMX54 is relevant for recreational and rigid inflatable boats up to 15 meters that seek a significant improvement in their underwater lighting without the complexity of a through-hull installation. Its surface-mount design, while requiring a hole for cable passage, is inherently less invasive than through-hull solutions, reducing structural risks and vessel downtime.

Integration with Lumishore control systems via the ECLIPSE Command Center or the SUPRA i-Connect Hub is a major advantage. This enables centralized management of lighting modes (blue, white, strobe, fade) directly from a compatible MFD or mobile device, offering superior operational flexibility compared to a simple switch. For conductive hulls, the mandatory use of the 39-0203 isolation kit is a critical point not to be overlooked to prevent galvanic corrosion and ensure the longevity of the installation.

While efficient for its size, it is essential to note that for vessels over 15 meters or those requiring an extremely wide lighting coverage, more powerful solutions or an increased number of units should be considered. The positioning of the lighting, ideally between 100 and 300 mm below the minimum waterline, is crucial to optimize the light effect and avoid hot spots. It is also important to ensure sufficient access behind the mounting surface for cable routing and securement.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SMX54, proiector subacvatic bicolor albastru și alb

493,78€

493,78€ ~~529,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the available lighting colors for the ECLIPSE SMX54 underwater light?

The ECLIPSE SMX54 underwater light provides dual-color lighting, combining blue and white. These modes can be controlled based on the selected control option.

For which type of boat is the ECLIPSE SMX54 lighting fixture recommended?

The ECLIPSE SMX54 light fixture is specifically designed for vessels up to 15 meters (50 feet) in length.

What is the luminous output of the SMX54 in white mode and in total?

The ECLIPSE SMX54 luminaire delivers a luminous output of 7,500 lumens in white mode and a total of 16,875 lumens, providing powerful underwater lighting.

What is the beam angle of the Lumishore ECLIPSE SMX54?

The Lumishore ECLIPSE SMX54 features a wide 90° beam angle, providing extended underwater light diffusion.

What are the construction materials of the SMX54 luminaire and its water resistance rating?

The SMX54 is built with a marine-grade bronze body and a borosilicate glass lens, providing high resistance to marine environments. Its IP68 rating ensures complete protection against dust and prolonged immersion.

What are the voltage requirements for operating the ECLIPSE SMX54 light fixture?

The ECLIPSE SMX54 light operates within a voltage range of 10.5 to 31V DC, suitable for nominal use at 12V or 24V DC.

What is the power consumption of the SMX54?

The maximum power consumption of the SMX54 is 5.9 A at 12V and 2.8 A at 24V. Its average consumption is 71 W.

What control options are available for the ECLIPSE SMX54 luminaire?

The ECLIPSE SMX54 light fixture offers several control options:

A simple on/off switch for basic modes.The ECLIPSE Command Center control unit.The SUPRA i-Connect hub and the SUPRA i-Connect switch (with the SUPRA Bridge option for control via an MFD multifunction display).

How to change lighting modes with a simple on/off switch?

To change the lighting mode (white, blue, random strobe, color fade), simply turn the switch off and on within 2 seconds. To reset the lighting to white mode, turn off the lights for 5 seconds. They will always power on in white mode on first use.

Is the ECLIPSE Command Center control unit compatible with all boat voltages?

No, installation with the ECLIPSE Command Center control unit is ONLY suitable for boats operating on 12V.

What is the required insulation kit for conductive hulls?

For boats with conductive hulls, it is MANDATORY to use the isolation kit (reference 39-0203) when installing the SMX54 light fixture.

At what depth below the waterline should the SMX54 light be installed?

For optimal underwater lighting, LUMISHORE recommends installing the luminaire between 100 and 300 mm (4 to 12 inches) below the boat’s minimum waterline.

On which type of surface should the SMX54 luminaire be mounted?

The light fixture must be mounted on a flat surface (not curved). For underwater installations, mounting must be done only on the transom or the hull side of the boat.

What are the dimensions of the ECLIPSE SMX54 luminaire?

The dimensions of the ECLIPSE SMX54 luminaire are as follows:

Diameter: 95 mm (3.74 in)Depth: 18 mm (0.71 in)PCD (Pitch Circle Diameter) for screws: 84 mm (3.31 in)

What precautions should be taken regarding heat during the installation of the luminaire?

The light fixture is temperature-sensitive and must not be located near an exhaust outlet or any other heat source.

What fuse ratings are recommended for the SMX54?

Recommended fuse ratings are 7.5 A for a 12 V DC installation and 4 A for a 24 V DC installation. Each light fixture must be fused individually.

Can I use power tools to tighten screws during installation?

No, it is important not to overtighten the screws and not to use power tools for tightening. The screws must be tightened by hand with a screwdriver.

How to prepare the hull for installing the SMX54 luminaire?

The hull must be cleaned and prepared for sealant application. For cored hulls, it is essential to seal them before installing lights, following the hull manufacturer's instructions.

How many SMX lights can be connected to a single SUPRA i-Connect hub?

A single SUPRA i-Connect hub can power up to 4 SMX lights. Additionally, up to 4 hubs can be connected together in the same system to control a larger number of lights.

What are the hole dimensions to drill for the mechanical installation of the SMX54?

The dimensions of the holes to drill are as follows:

Pilot holes for screws: 3.5 mm (9/64")
Hole for the cable: 7 mm (9/32")
Counterbore for the gland: a 13.5 mm (17/32") hole with a depth of 15 mm (5/8")