LUX Light Control Module, Light Control Module - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Garmin

010-04442-00

LUX, modul de control iluminat

Conçu pour la gestion de l'éclairage marin, le module de contrôle Lumishore LUX (010-04442-00) pilote jusqu'à 16 lumières Lumishore LUX (10.5-31V). Il permet une intégration via un EOS-LUX Command Center ou des interrupteurs momentanés pour un contrôle polyvalent. Ce module est fourni avec 25 cm de câble 3 conducteurs non terminé.

Prix publicBénéficier du tarif pro

232,97€

232,97€ ~~259,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip interfață de control	Interrupteurs momentanés, Centre de commande EOS-LUX, Écran multifonction (MFD), Appareil intelligent
Tip control	Boutons poussoirs (interrupteurs momentanés), Interface numérique (via EOS-LUX Command Center, MFD, appareil intelligent)
Sisteme iluminat compatibile	Produits d'éclairage Lumishore LUX (Downlights, feux de courtoisie)
Zone Control	Oui (via EOS-LUX Command Center)
Hub Max Lights	16
Interval de tensiune de funcționare	10.5-31 V
Consum electric tipic	115.2 W
Rețea cablată	DMX, Lumi-Link
Tipul instalației	Montage en surface
Dimensiuni produs	149.5 x 99.5 x 29.5 mm
Indice IP	IP68
Variator compatibil	Oui
Conținut pachet	Module de contrôle de lumière LUX, Guide d'installation
Cable Type Required	Câble standard 3 conducteurs
Fuse Protection Requirement	Chaque module doit être protégé individuellement par un fusible ou un disjoncteur adapté au courant total des lumières connectées.
Max Current Draw 12v	9.6
Max Current Draw 24v	4.8
Mounting Location Recommendation	Surface plane, endroit frais, sec et bien ventilé
Output Voltage Range	10.5 à 31 V
Instalare profesională recomandată	Oui
Voltage Drop Recommendation	Suivre les recommandations ABYC pour une chute de tension maximale de 3% à 12V et 10% à 24V.
Warranty Void Conditions	Utilisation avec d'autres marques d'éclairage, mauvaise installation, négligence, modification non autorisée.

Description détaillée

Proiectat pentru gestionarea centralizată și flexibilă a iluminatului marin, modulul de control Lumishore LUX (010-04442-00) este un component esențial pentru sistemele de iluminat Lumishore LUX. Acest modul permite controlul a până la 16 lumini Lumishore, inclusiv plafoniere și lumini de curtoazie, oferind o soluție integrată pentru ambarcațiunile echipate cu astfel de iluminat. Utilizarea sa cu alte mărci de iluminat nu este suportată și ar anula garanția.

Specificații tehnice și flexibilitate de control

Modulul de control Lumishore LUX funcționează cu o tensiune de alimentare de 10.5 până la 31 de volți, cu o tensiune de ieșire identică, asigurând compatibilitate cu sistemele de 12V și 24V. Curentul maxim tipic pentru 16 lumini este de 9.6 amperi la 12V și de 4.8 amperi la 24V. Fiecare modul trebuie protejat individual printr-un siguranță sau un întrerupător automat adaptat curentului total al luminilor conectate. Modulul are un grad de protecție IP68, asigurând rezistență la mediul marin.

Acest modul oferă două moduri de control. Poate fi utilizat autonom cu comutatoare momentane, oferind funcții de aprindere/stingere, reglare prin menținerea apăsării și selectare de culori (alb rece/neutru/cald, și opțional roșu/albastru/verde/magenta/cyan). Pentru o integrare avansată, se conectează la un centru de comandă EOS-LUX de la Lumishore, permițând controlul printr-un display multifuncțional (MFD) compatibil, un ecran dedicat EOS-LUX sau un dispozitiv inteligent. Această flexibilitate permite gestionarea localizată sau integrarea completă în rețeaua de la bord.

Instalare și poziționare strategică

Instalarea modulului de control Lumishore LUX este recomandată pe o suprafață plană, într-un mediu răcoros, uscat și bine ventilat. Este indicat ca instalarea electrică și mecanică să fie realizată de un profesionist calificat. Conexiunile la lumini se fac printr-un cablu standard cu 3 conductoare, cu atenție deosebită la calibrul acestuia pentru a evita căderile de tensiune, respectând recomandările ABYC (nu mai mult de 3% cădere la 12V, 10% la 24V). Modulul și luminile sunt furnizate cu 25 cm de cablu nefinisat, permițând o extensie personalizată.

Spre deosebire de soluțiile de iluminat mai simple, gestionate prin comutatoare de bază, modulul Lumishore LUX se poziționează ca un hub inteligent pentru sistemele Lumishore LUX, oferind capacități avansate de control (reglare, gestionare culori) și integrare în rețea. În timp ce mărci precum Raymarine sau B&G oferă propriile lor ecosisteme, acest modul este dedicat exclusiv integrării iluminatului Lumishore, garantând astfel compatibilitate și performanțe optime în acest mediu. Este esențial pentru deblocarea funcționalităților complete ale iluminatului Lumishore LUX.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation du module de contrôle d'éclairage LUX

Avis de l'expert

«
Lumishore LUX control module: integration and management of Lumishore lighting
»

This Lumishore LUX control module is a foundational element for any vessel looking to integrate and optimize its Lumishore LUX lighting system. Its practical value lies in its ability to standardize the control of downlights and courtesy lights, turning a series of independent light points into a coherent and manageable system. It is particularly suited to owners seeking a more sophisticated control interface than a simple switch, whether via momentary switches for quick access or full integration with an MFD for centralized management.

Installation, while requiring a professional to comply with ABYC standards regarding voltage drops and 3-conductor wiring, remains standard for this type of equipment. Positioning the module in a ventilated space is critical for its longevity. Its flexible configuration options, whether used standalone or paired with an EOS-LUX Command Center, provide integration choices tailored to various dashboard layouts or onboard living areas.

It is important to note that this module is specifically designed for the Lumishore LUX ecosystem. Attempting to use it with lighting fixtures from other brands will not only void the warranty but may also cause functional incompatibilities. Its purpose is to unlock the full potential of Lumishore lighting, particularly in terms of dimming and CRGBW color management, setting it apart from generic controllers. It is not a universal controller but a dedicated technical bridge essential for fully utilizing Lumishore LUX lighting features.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX, modul de control iluminat

232,97€

232,97€ ~~259,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin LUX lighting control module?

The Garmin LUX lighting control module (part number 010-04442-00) is a key component designed for centralized and flexible management of marine lighting systems. It is specifically intended to control Lumishore LUX lights, providing an integrated solution for vessels equipped with these lights.

How many Lumishore LUX lights can a single module control?

A single Garmin LUX lighting control module can control up to 16 Lumishore LUX lights, including downlights and courtesy lights.

Which types of lights are compatible with this control module?

This module is designed to operate exclusively with Lumishore LUX lighting products, such as downlights and courtesy lights. Using it with lighting products from other brands is not supported and will void the warranty.

What is the waterproof rating of the Garmin LUX control module?

The Garmin LUX control module has an IP68 waterproof rating, ensuring resistance to marine environmental conditions.

What are the power supply specifications of the module?

The Lumishore LUX control module operates on an input voltage range of 10.5 to 31 volts and provides an identical output voltage, making it compatible with 12V and 24V marine electrical systems.

What is the typical maximum current that the module can handle?

For 16 connected lights, the typical maximum current is 9.6 amperes at 12V and 4.8 amperes at 24V.

What control options are available for the LUX light module?

The module offers dual control approaches:

It can be used autonomously with momentary switches for on/off, dimming via pressure hold, and color selection (cool/neutral/warm white, and optional RGB colors). It can also be used in conjunction with an EOS-LUX control center for full lighting control via a multifunction display (MFD), an EOS-LUX screen, or a smart device.

What are the recommendations for installing the LUX control module?

The LUX control module must be mounted on a flat surface, in a cool, dry, and well-ventilated area on the boat.

Does the module require fuse or circuit breaker protection?

Yes, each LUX control module must be individually protected by a fuse or circuit breaker suitable for the total current of the connected lights to ensure system safety.

What type of cable is recommended to connect the lights to the module?

It is recommended to use a standard 3-core cable to connect each light to the module. It is essential to calculate the system's current consumption at the boat's input voltage and use the correct cable gauge to avoid voltage drop issues, following ABYC recommendations.

How should the lights be wired to the module?

All lights must be wired in parallel to the module. They can be wired in a daisy chain or star pattern.

What happens if I use the module with lights from a brand other than Lumishore?

Using the LUX control module with lights from brands other than Lumishore is not supported and will void the product warranty.

Are extension cables required for the lights?

The module and lights are supplied with 25 cm of 3-core unterminated cable. This cable can be extended using standard 3-core cable, ensuring all connections are watertight.

Who should carry out the electrical and mechanical installation of the module?

The electrical and mechanical installation of the module must be carried out by a qualified professional to ensure the safety and proper functioning of the system.

What are the control options via momentary switches?

For standalone operation, momentary switches can offer the following options:

Option 1: A switch for on/off (hold to adjust brightness) and an optional switch to select cold white, neutral white, or warm white. Option 2: A switch for on/off (hold to adjust brightness) and an optional switch to select cold white, neutral white, warm white, red, blue, green, magenta, or cyan.

Is the module compatible with my boat's multifunction displays (MFD)?

Yes, the LUX control module can be used in conjunction with the EOS-LUX control center and other Lumishore LUX or EOS lighting products to provide full control of the vessel's lighting from the multifunction display (MFD), the EOS-LUX screen, or a smart device.

What are the ABYC recommendations regarding voltage drop for wiring?

It is recommended to follow ABYC guidelines for a maximum voltage drop of 3% at 12V and 10% at 24V to ensure proper operation of lights and avoid issues related to insufficient voltage.

How does the EOS-LUX control unit regain control if local switches are used?

If the module is controlled by independent momentary switches (mounted in the cabin or on the dashboard), the EOS-LUX control unit can take over control by turning off and then back on the associated zone from the MFD, the smart device, or the EOS-LUX display.

What conditions void the warranty of the LUX control module?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or non-approved installations. Failure to comply with installation guidelines, maintenance instructions, or the product’s usage manual also voids the warranty.

What is the warranty duration for the Lumishore LUX lighting control module?

Lumishore Ltd guarantees its lighting systems, lights, and associated accessories against manufacturing defects for a period of three years from the date of initial purchase.