Navislim vertical alb 2MN - barcă < 20 m – Kit Babord+Tribord+Pupă

The MANTAGUA Navislim vertical kit includes three vertical LED lights:

Port side red light (112.5° visibility angle)Starboard green light (112.5° visibility angle)Stern white light (135° visibility angle)

Each navigation light included in this kit provides a luminous range of 2 nautical miles (2 NM), which complies with requirements for boats under 20 meters.

Yes, Navislim lights are designed to withstand marine environments. They are made from PC + ASA UV-resistant materials and have an IP67 waterproof rating, ensuring protection against temporary immersion and dust.

Power consumption is as follows:

1.08 W per side light (port and starboard)
2.16 W for the stern light
These values indicate low power consumption, minimizing impact on the vessel's electrical system.

Each Navislim vertical navigation light has compact dimensions of H 38 x W 85 x D 45 mm, allowing discreet integration on the boat's superstructures.

Each MANTAGUA Navislim navigation light weighs 170 grams.

This specific MANTAGUA Navislim vertical navigation light kit is offered with a white finish.

Yes, the kit is certified RED ENSIGN 76057/XX UK, WHEELMARK 60427/XX MED and ABYC C-5. These certifications attest to its compliance with international COLREG 72 regulations for navigation safety.

Each navigation light included in the kit provides a light intensity greater than 5.4 candelas (Cd).

Yes, each light comes with 2 meters of cable and 2 M4 screws to make installation easier.

The 'slim' design of Navislim lights allows for discreet and harmonious integration on ship superstructures. Their slim profile avoids clutter and fits well with modern designs.

The lights are designed to operate on a 10 to 30 VDC power supply, making them compatible with most boat electrical systems.

This navigation light kit is specifically designed and certified for boats under 20 meters in length.

Yes, thanks to their 10 to 30 VDC power range, these lights are compatible with the 12V and 24V electrical systems commonly used on boats.

To comply with COLREG 72 regulations:

The red port-side light must be installed on the left side of the boat. The green starboard light must be installed on the right side of the boat. The white stern light must be installed at the rear of the boat. All lights in this kit are of the vertical type and must be mounted accordingly.

Each light comes with 2 meters of cable and 2 M4 screws, making installation easier. However, to ensure compliance with maritime standards and guarantee safety, it is always recommended to consult a professional or strictly follow the mounting instructions.

No, the lights have an IP67 ingress protection rating, providing full protection against dust and temporary immersion. Correct installation according to the manufacturer's instructions is sufficient without requiring additional sealing protections.

Yes, the MANTAGUA Navislim navigation lights kit is covered by a warranty.

The IP67 rating means the lights are fully protected against dust (first digit '6') and can withstand temporary immersion in water (up to 1 meter for 30 minutes, second digit '7'). This ensures high durability and reliability in marine environments.

Yes, thanks to their low power consumption, at just 1.08 W per side light and 2.16 W for the stern light, these LED lights are specifically designed to minimize the impact on the vessel’s energy consumption and electrical system.