Cablu MasterBus 0,5 m

This cable is designed to connect and enable communication between different Mastervolt equipment (chargers, inverters, energy monitors) within your onboard energy network using the CAN-bus communication protocol.

No, the MasterBus cable is specifically designed for Mastervolt's proprietary network. It is intended to connect exclusively devices compatible with the MasterBus ecosystem.

The connection is made in a daisy chain (daisy-chaining). Simply connect the cable from one device to the next using the standardized MasterBus ports on your equipment.

Yes, as with any MasterBus network, both ends of your device chain must be terminated with a MasterBus Terminator, regardless of the cable length between devices.

Absolutely. This 0.5m cable is particularly recommended for direct bridging between very close components, such as a MasterShunt and a Mastervolt Lithium-Ion battery.

The cable itself uses Mastervolt's specific CAN-bus protocol. To connect your MasterBus network with a NMEA 2000 network, you will need a specific interface (MasterBus NMEA 2000 Interface) in addition to this cable.

Yes, this cable is designed to provide optimal durability in demanding marine and mobile environments, ensuring reliable connections despite vibrations and harsh onboard conditions.

This MasterBus cable strictly complies with the RoHS directive (2011/65/EU) and the NEN-EN-IEC 63000:2018 design standard regarding the restriction of hazardous substances in electrical equipment.

The MasterBus cable of 0.5 meters is extremely light, with a total packaged weight of just 28 grams (0.028 kg).

No specific tool is required. The connectors clip directly and easily into the MasterBus ports of your devices using a plug-and-play system.

Although the cable is designed to limit interference, it is still recommended during installation to physically separate communication cables from high-power cables to ensure optimal data signal.

The MasterBus network transmits both communication data and low-power electrical supply. This allows small control interfaces or displays to be powered directly via the communication cable.

A MasterBus cable has two ends and is used to connect exactly two adjacent devices within your network chain.

You can connect all Mastervolt devices in the MasterBus ecosystem equipped with MasterBus ports: battery chargers, inverters, combined systems, energy monitors, shunts, and various control interfaces.

Yes, the cable is ready to use. It comes with its high-quality connectors already assembled and secured at both ends.

A daisy-chain setup means devices are connected one after another. This cable links device A to device B, then another cable will link device B to device C, forming a continuous communication chain.

Absolutely. Its short 50 cm length is perfectly suited to neatly connect two network interfaces or Mastervolt modules mounted side by side on a DIN rail in your electrical panel.

The cable uses the CAN-bus communication protocol, which forms the reliable and fast foundation of the MasterBus system for synchronizing power systems.