Convertor DC Master 24/12-6

The DC Master 24/12-6 converter is used to step down the voltage of a 24V battery bank to safely power 12V electronic equipment aboard your boat.

This model delivers a rated power of 82W (6A continuous). It can also provide a peak power of 136W (10A) for two minutes to handle inrush currents at startup for certain devices.

Being a non-isolated model, it has a direct electrical connection between input and output. This allows it to be more compact, less expensive, and to offer excellent efficiency with very low heat generation.

Yes, this non-isolated converter is specifically designed and perfectly suited for marine installations with a common negative ground.

Installation is very simple thanks to the supplied mounting system:

Choose a cool, dry, and well-ventilated location. Secure the wall mount (clip) using the included screws. Simply clip the converter onto its bracket.

Electrical connections are made quickly using Faston-type spade connectors. These connectors are included in the packaging with the device.

The housing has an IP53 protection rating. It is therefore protected against dust and resists oblique water splashes, which is ideal for a marine environment, but it must under no circumstances be submerged.

The idle consumption of this converter is extremely low. At its nominal input voltage, it draws less than 10 mA, effectively preserving your battery energy.

To deliver its full power, it accepts an input voltage between 20V and 32V DC. It can tolerate up to a maximum of 35V without sustaining damage.

Yes, for safety and proper operation, you must connect the two input wires first, and only then connect the output wires.

Yes, it is strongly recommended to install a fuse on the positive wiring, placing it as close as possible to the battery to secure the boat's electrical installation.

This model is particularly compact. Its dimensions are 89 x 87 x 50 mm (height x width x depth), with a very light weight of approximately 250 grams.

The unit uses a natural cooling system. Thanks to its high efficiency, it dissipates very little heat, making an internal fan unnecessary and ensuring silent operation.

It is advisable to choose a cool, dry, and well-ventilated location. Proper ventilation is essential to ensure natural cooling and maintain the device's optimal performance.

Yes, the inverter includes a stabilization function. It delivers a constant output voltage perfectly stabilized at 13.6V, thus protecting your small electronic devices from voltage fluctuations.

It is designed to absorb short current spikes at startup thanks to its peak capacity of 10A (136W) for a maximum of two minutes. Suitable for small equipment, but always check your device's peak consumption before plugging it in.

The complete package includes:

DC Master 24/12-6 converter A mounting bracket (clip) Necessary screws Faston terminals

The device operates optimally at an ambient temperature between 0°C and 30°C. Beyond 30°C and up to 80°C, a linear performance drop applies to protect internal components.

Before any manipulation, ensure the power source output is turned off. Also check that no consumers are connected to the batteries to avoid any risk of short circuit or electric shock.