Display SmartRemote OEM (fără cabluri)

The Mastervolt SmartRemote is a compact display and local remote control designed for monitoring and controlling your energy equipment. It is ideal for checking battery status, adjusting a shore power fuse, or controlling a charger/inverter.

The OEM version (reference 77010500) is intended for professionals and is supplied bare. Unlike the standard version, the MasterBus and Mastervolt-CZone interconnecting cables are not included and must be ordered separately.

The SmartRemote supports a wide range of Mastervolt devices, including:

All CombiMaster and ChargeMaster Plus modelsLithium batteries MLI Ultra (models 1250 to 6000 and MKI)MasterShunt 500 battery monitors

The device does not require any dedicated power supply. It is powered directly via the MasterBus network (11-14 V). Simply ensure that at least one device on the network can provide this power.

It features a 16-bit color screen measuring 2.8 inches, delivering a clear resolution of 320 x 240 pixels for optimal readability of your system's key parameters.

No, this display has an IP20 protection rating. It is not waterproof and is designed for indoor installation only, protected from water and excessive humidity.

The SmartRemote is very compact. Its dimensions are 72 x 72 x 30 mm (height x width x depth), with a light weight of only 75 grams.

Installation is simple and universal. You can choose between a standard surface mount requiring a 52 mm circular cutout, or integrate it seamlessly into Blue Sea Systems Custom 360 panels.

No, its power consumption is extremely low. In standby mode, it only consumes about 180 mW, which preserves the autonomy of your house batteries.

Yes, it includes an energy-saving mode. The user can set automatic standby to 2, 5, or 10 minutes of inactivity. It is also possible to disable this function (setting "Never").

Yes, the user interface is multilingual. It supports French, as well as English, Dutch, German, Spanish, Italian, Danish, Swedish, Norwegian and Finnish.

The SmartRemote operates optimally within a temperature range of -20 °C to 55 °C. The maximum tolerated relative humidity is 95 % without condensation.

Yes, the SmartRemote natively communicates via the MasterBus protocol. It must be connected to this network to detect compatible devices, display their data, and receive its power supply.

At any time, you can manually turn off the screen (standby) by holding down the left and right buttons for 3 seconds. Pressing any button will turn it back on.

Compatibility with CZone networks is planned by Mastervolt. It requires a specific Mastervolt-CZone connection cable, which is not included in this OEM version.

Absolutely not. The SmartRemote is designed to be Plug & Play. Once connected to the MasterBus network, it requires no complex configuration to start monitoring your devices.

If you want to disconnect a specific device from the display, go to the main menu and select the "Unpair device" option, then confirm your choice.

No, since this is the OEM reference (77010500), the display is sold separately. MasterBus network cables and any CZone interconnect cables must be purchased separately based on the required length.