Încărcător convertor Mac Plus 12/12-50 + CZone

The Mastervolt Mac Plus 12/12-50 + CZone is a sophisticated DC-DC charger-converter. It converts a direct voltage (battery) into a stabilized direct voltage. It can be used as a three-stage battery charger or as a stabilized DC power supply device. It is designed to optimize the performance of service batteries, particularly by compensating for the limitations of modern alternators (Euro 5/6 and start/stop).

This Mac Plus 12/12-50 model has a nominal input voltage of 12 V and an input voltage range of 10 to 16 V. Its nominal output voltage is 12 V, with a range of 10 to 15 V.

The Mac Plus 12/12-50 delivers a maximum output power of 725 W and a nominal output power of 675 W. The maximum output current is 50 A.

Yes, the Mac Plus 12/12-50 + CZone is designed for silent operation. It uses fanless natural cooling, which contributes to its quiet operation.

The Mac Plus 12/12-50 + CZone has an efficiency of over 95% at nominal input voltage and full load, with a peak reaching 97%.

The dimensions of the Mac Plus 12/12-50 + CZone are 255 x 165 x 66 mm (length x width x height). Its weight is 2 kg.

The Mac Plus integrates multiple protections to ensure the safety of the device and the installation:

Overload protectionOverheat protectionShort-circuit protection (DC)Reverse polarity protection (via a fuse)It also features an IP23 protection rating, providing superior protection against dust and water ingress.

The Mac Plus 12/12-50 + CZone is compatible with a wide range of battery technologies, including:

Flooded lead-acid batteriesGel batteriesAGM batteriesSpiral-cell batteriesLithium-ion batteries (including LiFePO4)Traction batteriesUser-defined battery types

Yes, the Mac Plus 12/12-50 + CZone is designed to work perfectly with modern alternators, including those meeting Euro 5 and Euro 6 standards. It ensures proper charging by providing a constant power output, even when the alternator is inactive, thus compensating for the limitations of these systems.

Yes, the Mac Plus 12/12-50 + CZone allows parallel operation. Up to ten units can be configured in parallel to provide a charging capacity well above 100 amperes.

The Mac Plus 12/12-50 + CZone is fully compatible with MasterBus, CZone, and NMEA 2000 communication protocols. This compatibility enables superior monitoring and control, as well as easy integration into complete systems.

No, the Mac Plus 12/12-50 + CZone is designed to be used only in installations with a common negative ground.

The Mac Plus must be installed to prevent any obstruction of airflow through the ventilation openings. The unit requires a minimum clearance of 10 cm (4 inches) on all sides to ensure effective natural cooling.

No, it is not recommended to mount the Mac Plus directly above the batteries. This is due to potential corrosive sulfur emissions from the batteries, which could damage the device.

The Mac Plus can be configured in several ways:

Via the built-in DIP switches for basic setup.Via MasterAdjust for advanced configuration.Via the CZone configuration tool, if integrated into a CZone system.

Yes, the Mac Plus has intelligent engine operation detection. This feature ensures the starter battery is never drained by prioritizing charging of the service battery only when the engine is running and providing power.

Mastervolt provides a two-year product warranty on the Mac Plus 12/12-50 + CZone, starting from the purchase date. This warranty is valid provided the product is installed and used in accordance with the instructions in the supplied manual.

The Mac Plus warranty is limited to the cost of repairing and/or replacing the product. It is important to note that labor and shipping costs are not covered by this warranty.