Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 12%

Navico

000-14029-001

Sondă TripleShot Skimmer

Conçue pour les unités HOOK2 TripleShot, la sonde Navico TripleShot Skimmer offre une vision sous-marine complète grâce à ses technologies High CHIRP, DownScan et SideScan. Elle permet d'atteindre des profondeurs de 152 m en CHIRP et 91 m en DownScan/SideScan. Ce transducteur pour tableau arrière de 6 m de câble intègre une sortie profondeur, imagerie et température.

Prix publicBénéficier du tarif pro

191,16€

191,16€ ~~218,39€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	Traditionnel,CHIRP,DownScan,SideScan
Tensiune de funcționare	12
Frecvențe sonar	200, 455, 800
Temperatură de funcționare	-15 à +55
Adâncime maximă de citire	152.0
Material sondă	Plastique
Tip conector sonar	Navico 8 broches
Lungimea cablului	6.0
Senzor de temperatură integrat	Oui
Afișaje compatibile	Écrans multifonctions Lowrance et Simrad compatibles TripleShot
Indice IP	IPX7
Tip de montaj	Tableau arrière
Certificări	CE
Domeniu de măsurare temperatură	-15 à +55
Unghi de acoperire al fasciculului	44
Frecvență CHIRP înaltă	200
Tip de pescuit	Mer, lac
Senzor de viteză integrat	Non
Net Weight Kg	0.48
Greutatea ambalajului	0.67
Cod de bare produs	9420024166307
SKU al produsului	000-14029-001
Sidescan Max Range 455khz	183
Sidescan Max Range 800khz	91
Intervalul de temperatură de depozitare	-30°C à +70°C
Nivel utilizator	Intermédiaire
Garantie	2.0

Description détaillée

Sonda Navico TripleShot Skimmer (referință 000-14029-001) este un transductor multifuncțional proiectat pentru sistemele de pescuit și navigație, care integrează trei tehnologii sonar distincte. Această sondă combină sonarul CHIRP de înaltă frecvență, imagistica DownScan™ și imagistica SideScan™, oferind astfel o vizualizare detaliată a coloanei de apă și a structurilor subacvatice. Ea se poziționează ca o soluție completă pentru pescari, permițând identificarea precisă a peștilor și a mediului lor, similar cu capacitățile oferite de sisteme precum sondele TotalScan de la Lowrance sau transductoarele Garmin ClearVü/SideVü, dar optimizată pentru gama HOOK2 de la Navico.

Capacități Sonar Avansate

Modul tradițional High CHIRP funcționează la o frecvență de 200 kHz, cu o lățime a fasciculului de 44° și o capacitate de detecție maximă de 152 metri (500 picioare). Pentru imagistica structurală, DownScan Imaging™ și SideScan Imaging™ funcționează la frecvențe de 455 kHz și 800 kHz. DownScan atinge o adâncime de 91 metri (300 picioare) la 455 kHz și 46 metri (150 picioare) la 800 kHz. SideScan, pe de altă parte, oferă o acoperire laterală de 183 metri (600 picioare) dintr-o parte în alta la 455 kHz și 91 metri (300 picioare) la 800 kHz, cu lățimi ale fasciculului de 55/0.8° la 455 kHz și 35/0.5° la 800 kHz. Aceste performanțe permit o acoperire extinsă și o vizualizare fotografică a fundurilor marine.

Concepție și Instalare

Cântărind 0,48 kg, sonda TripleShot Skimmer este proiectată pentru montaj pe tabloul de bord, asigurând o instalare facilitată. Ea este echipată cu un cablu de 6 metri (20 picioare) și un conector cu 8 pini, asigurând compatibilitatea cu unitățile HOOK2 TripleShot de 5, 7, 9 și 12 inci. Condițiile de funcționare sunt specificate între -15°C și +55°C, iar intervalul de depozitare de la -30°C la +70°C, asigurând reziliență în diverse medii marine. Pentru instalare, se recomandă evitarea virurilor de debușare și a flaps-urilor, precum și alegerea unui loc cu un flux de apă neperturbat. Sunt furnizate diametre specifice de găurire pentru materialele moi (Ø 3,7-4,0 mm) și rigide (Ø 4,2-4,7 mm), cu aplicarea unui produs de etanșare marină pentru găurile pilot.

Documentations

Type	Nom
	EN - Guide d'installation - TripleShot Skimmer Sonde
	FR - Guide d'installation - TripleShot Skimmer Sonde

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the Navico TripleShot Skimmer transducer for HOOK2 »

The Navico TripleShot Skimmer transducer is an efficient solution for recreational boaters and anglers equipped with a compatible Lowrance HOOK2 unit. Its main advantage lies in its "3-in-1" integration, combining traditional high-frequency CHIRP sonar with DownScan and SideScan imaging technologies. This versatility is particularly relevant for users seeking a comprehensive view of the underwater environment without installing multiple specialized transducers. It allows switching between fish detection in the water column and detailed analysis of submerged structures, such as wrecks or seagrass beds, which are often fish-holding areas.

For installation, mounting on the transom is straightforward and does not require specialized skills. However, it is crucial to follow positioning recommendations to avoid turbulence, which could degrade signal quality, especially for SideScan and DownScan imaging. Avoiding areas near chines or flaps is essential to ensure optimal performance. The exclusive compatibility with HOOK2 TripleShot units is a key consideration: this transducer is not a universal solution for other Navico brands or models, positioning it specifically for upgrades or replacements within this ecosystem. Its depth capabilities (152 m in CHIRP, 91 m in SideScan/DownScan) make it suitable for small to medium-sized vessels operating in coastal or inland waters, rather than deep offshore applications. The integrated water temperature measurement is an added benefit for analyzing fishing conditions.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sondă TripleShot Skimmer

191,16€

191,16€ ~~218,39€~~

Complétez votre installation avec des

Équipements complémentaires

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde - photo 2

B&G

Plotter cartografic Zeus 3S 12" cu hartă de bază mondială

Ref : 000-15412-002

3.981,96€

3.981,96€ ~~4.772,38€~~

Zeus³S Glass Helm 19" Display Only | B&G Sailing USA

B&G

Ecran Zeus³S Glass Helm MFD 19"

Ref : 000-15050-001

7.270,90€

7.270,90€ ~~8.788,32€~~

B&G Pack Zeus 3S, traceur 9", Radar HALO 20+

B&G Pack Zeus 3S, traceur 9", Radar HALO 20+ - photo 2

B&G

Pachet Zeus 3S, traceur 9", radar HALO 20+

Ref : 000-15563-001

4.136,59€

4.136,59€ ~~5.407,75€~~

B&G Pack Système Zeus³S Glass Helm 16", GPS, clavier ZC2 et accessoires.

B&G Pack Système Zeus³S Glass Helm 16", GPS, clavier ZC2 et accessoires. - photo 2

B&G

Pachet Sistem Zeus³S Glass Helm 16", GPS, tastatură ZC2 și accesorii.

Ref : 000-15129-001

6.361,86€

6.361,86€ ~~8.100,55€~~

Lowrance

Eagle 7" (Lowrance)

Ref : 000-16230-001

393,84€

393,84€ ~~502,80€~~

Lowrance

Traceur Elite FS 7

Ref : 000-15702-001

851,38€

851,38€ ~~1.018,80€~~

Vulcan 9 combiné GPS sondeur B&G - Wi-Fi, NMEA 2000

B&G

Vulcan 9" - Sistem de cartografiere

Ref : 000-13214-001

900,00€

900,00€ ~~1.080,00€~~

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde - photo 2

B&G

Echipament de cartografiere Zeus 3S 9" B&G cu hartă de bază mondială

Ref : 000-15411-001

2.249,10€

2.249,10€ ~~2.998,80€~~

B&G Traceur de carte Zeus S 7" - photo 2

B&G

Plotter cartografic Zeus S 7"

Ref : 000-15217-001

953,64€

953,64€ ~~1.258,80€~~

B&G Traceur de carte Zeus S 9" - photo 2

B&G

Plotter cartografic Zeus S 9" B&G

Ref : 000-15221-001

1.463,23€

1.463,23€ ~~1.738,80€~~

B&G

Plotter Vulcan 7R B&G (fără XD)

Ref : 000-14082-001

568,43€

568,43€ ~~756,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What sonar technologies are integrated in the Navico TripleShot Skimmer transducer?

The Navico TripleShot Skimmer transducer integrates three distinct sonar technologies:

Traditional high-frequency CHIRP sonar. DownScan Imaging™ imaging. SideScan Imaging™ imaging. Combined, these technologies provide a detailed view of the water column and underwater structures.

What is the maximum detection depth of the traditional CHIRP sonar?

The CHIRP high-frequency traditional sonar of the TripleShot Skimmer fishfinder, operating at 200 kHz, has a maximum depth detection capability of 152 meters (500 feet).

What frequencies are used for DownScan and SideScan imaging?

The DownScan Imaging™ and SideScan Imaging™ imaging of the TripleShot Skimmer sounder operate on two frequencies: 455 kHz and 800 kHz.

What is the maximum side range of the SideScan Imaging?

The SideScan Imaging™ imagery provides a maximum lateral coverage of 183 meters (600 feet) end-to-end when operating at 455 kHz. At 800 kHz, the lateral range is 91 meters (300 feet).

What types of data does the TripleShot transducer provide?

The Navico TripleShot Skimmer transducer provides the following data:

Water depth. SideScan imaging. DownScan imaging. Water temperature.

What is the weight of the Navico TripleShot Skimmer transducer?

The Navico TripleShot Skimmer transducer weighs 0.48 kg (approximately 1.06 lbs).

What is the length of the depth sounder cable?

The Navico TripleShot Skimmer transducer comes with a 6-metre (20-foot) cable.

What are the operating and storage temperatures of the depth sounder?

The Navico TripleShot Skimmer transducer can operate within a temperature range of -15°C to +55°C (5°F to 131°F). For storage, the range is -30°C to +70°C (-22°F to 158°F).

What is the beam width of the traditional CHIRP sonar?

The CHIRP high-frequency traditional sonar of the TripleShot Skimmer fishfinder has a beam width of 44° at 200 kHz.

What is the maximum depth of DownScan Imaging at 455 kHz and 800 kHz?

For DownScan Imaging™ imagery, the maximum depth is 91 meters (300 feet) at 455 kHz and 46 meters (150 feet) at 800 kHz.

What is the recommended mounting type for this transducer?

The recommended mounting type for the Navico TripleShot Skimmer transducer is transom mounting.

What are the recommended hole diameters for installing the depth sounder?

The recommended drill diameters for 10 mm screws depend on the material:

For soft materials (such as plywood): Ø 3.7-4.0 mm (5/32"). For rigid materials (such as fiberglass, acrylic, hardwoods): Ø 4.2-4.7 mm (3/16").

Where should the transducer NOT be installed on the boat?

To ensure optimal performance and avoid turbulence, it is not recommended to install the transducer on a chine or near flaps. The ideal location is in an undisturbed water flow.

Should a sealing product be used during installation?

Yes, it is recommended to apply a high-quality marine sealant/adhesive, above or below the waterline, on the drilled holes during installation.

How to ensure the best water flow for the depth sounder?

To ensure the best water flow and optimize the depth sounder's performance, it is crucial to install it in a location where the water is least disturbed. Avoid areas near chines or flaps that can create turbulence.

With which fishfinder ranges is the TripleShot Skimmer transducer compatible?

The Navico TripleShot Skimmer transducer is specifically optimized and designed to be compatible with the Lowrance HOOK2 fishfinder range.

How many pins does the transducer connector have?

The Navico TripleShot Skimmer transducer is equipped with an 8-pin connector.

Is this transducer compatible with older Lowrance models or other brands?

The TripleShot Skimmer transducer is specifically designed and optimized for the Lowrance HOOK2 range. Compatibility with older Lowrance models or other brands of fishfinders is not guaranteed without a specific adapter, which is not included with the transducer.

Can the TripleShot Skimmer transducer be used with devices from brands other than Navico?

The Navico TripleShot Skimmer transducer is primarily designed for Lowrance HOOK2 systems, which are part of the Navico group. For use with equipment from other brands, specific adapters would be required, but compatibility and optimal performance cannot be guaranteed.

Is the TripleShot Skimmer transducer compatible with systems that do not support DownScan or SideScan?

Although the transducer integrates traditional CHIRP sonar, DownScan and SideScan imaging, to fully utilize all its features, the fishfinder system it is connected to must be compatible with DownScan and SideScan imaging. If your device only supports traditional sonar, only these features will be available.