Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 3%

Quick

RC162

Distribuitor de încărcare 1E/2S/160A

Conçu pour une gestion énergétique marine optimale, le répartiteur de charge électronique QUICK RC162 (1E/2S/160A) assure une recharge simultanée et sans chute de tension de deux parcs de batteries 12V/24V. Grâce à sa technologie MOSFET, il garantit une distribution automatique et efficace du courant. Le produit est livré avec sa documentation.

Prix publicBénéficier du tarif pro

252,92€

252,92€ ~~263,40€~~

TTC Expediere calculată la momentul plății.

Stoc redus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune nominală	12V/24V
Rețea cablată	Aucun
Curent de încărcare maxim (A)	160.0
Număr maxim de baterii în paralel	2.0
Orientare de montaj	Verticale ou horizontale
Indice IP	Non spécifié
Greutate	1.2
Battery Banks	2.0
Battery Isolation	Oui
Charge Distribution Method	Automatique (vers la batterie la moins chargée)
Combine Voltage	5-31 Vdc
Curent continuu (A)	160.0
Cooling Type	Passif
Număr model	ECS162 / FBECS1620000D00
Tip de montaj	Montage en surface
Greutate netă	1.2
Număr de intrări	1
Număr de ieșiri	2
Open Voltage	5-31 Vdc
Dimensiuni produs (L x l x H)	195 x 68 x 135
Tipul releului	MOSFET
Start Isolation	Oui
Status Indicator	LED
Voltage Drop At Rated Current	Négligeable

Description détaillée

Proiectat pentru a optimiza gestionarea energetică la bord, distribuitorul electronic de încărcare QUICK RC162 (model ECS162 / FBECS1620000D00) este o soluție dedicată sistemelor de 12V și 24V. Acest dispozitiv permite încărcarea eficientă și independentă a mai multor grupuri de baterii pornind de la o singură sursă de încărcare, precum un alternator. Cu o intrare și două ieșiri, el gestionează un curent maxim de încărcare de 160 amperi pe intrare, asigurând o distribuție adecvată către bateriile conectate.

Tehnologie MOSFET pentru o încărcare optimizată

Distribuitorul QUICK RC162 integrează tehnologia MOSFET, oferindu-i avantajul major de a funcționa cu o cădere de tensiune neglijabilă sau chiar zero. Spre deosebire de distribuitoarele tradiționale cu diode care pot genera o pierdere semnificativă de tensiune, acest model garantează că bateriile dvs. primesc tensiunea de încărcare integrală de la alternator sau încărcător, optimizând astfel durata lor de viață și viteza de încărcare. El asigură izolarea grupurilor de baterii, împiedicând descărcarea reciprocă, și distribuie automat curentul către bateria cu cel mai mic nivel de încărcare pentru o eficiență maximă.

Concepție și instalare

Cu dimensiunile de 195 x 68 x 135 mm (L x H x P) și o greutate de aproximativ 1,2 kg, RC162 prezintă un design compact care facilitează instalarea și cablarea în diverse medii marine. Răcirea pasivă contribuie la fiabilitatea și funcționarea sa silențioasă. Poate fi instalat în poziție verticală sau orizontală, oferind flexibilitate de integrare. Distribuitorul este compatibil cu o gamă de tensiune de intrare de 5 până la 31 Vcc și este dotat cu un indicator LED de funcționare. Este proiectat pentru o disipare redusă de putere și utilizare fără întreținere pe o gamă largă de temperaturi ambiante. Documentația PDF este inclusă pentru a facilita implementarea.

Avis de l'expert

Pol CONIN

Responsabil digital

« Analysis of the QUICK RC162 load distributor: MOSFET efficiency for multi-battery systems »

The QUICK RC162 electronic load distributor is a critical component for modern marine electrical architectures. It is designed for vessels equipped with multiple battery banks (engine, service, bow thruster, etc.) requiring simultaneous and optimized charging from a single source, typically the main alternator. Its MOSFET technology represents a significant advancement over traditional diode-based distributors.

The key advantage lies in the near-total absence of voltage drop. While a diode-based distributor can cause a loss of 0.6 to 0.8 volts, reducing charging efficiency and battery lifespan, the RC162 ensures that battery banks receive the full alternator voltage. This is crucial for maintaining complete charge cycles and preserving battery health over time. The 160A capacity is suitable for most standard onboard alternators.

From an installation perspective, its compact size (195 x 68 x 135 mm (L x H x D)) and the option for vertical or horizontal mounting provide valuable flexibility in often tight spaces. Integration with existing charging systems is simplified by its compact design and 12/24V compatibility. It is important to note that for very high-power alternators (over 160A), more robust battery management solutions or intelligent charging systems may be required.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Distribuitor de încărcare 1E/2S/160A

252,92€

252,92€ ~~263,40€~~

Complétez votre installation avec des

Équipements complémentaires

Cutie de releu pentru vinciuri 3 fire 12V 150A SUFFIX1001P

Quick

Cutie de releu pentru vinciuri 3 fire 12V 150A SUFFIX1001P

Ref : T6315-12

182,76€

182,76€ ~~208,08€~~

Cititor de hartă / Lumină LED Shark 10-30V Lung. 30cm

Quick

Cititor de hartă / Lumină LED Shark 10-30V Lung. 30cm

Ref : QL061

118,22€

118,22€ ~~124,80€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is a load distributor and what is it used for?

A battery distributor is a device designed to optimize energy management on board. It allows efficient and independent charging of multiple battery banks (e.g., engine battery and service batteries) from a single charging source, such as an alternator, while isolating these banks to prevent them from discharging each other.

What technology is used in the QUICK RC162 charge distributor?

The QUICK RC162 charge distributor integrates MOSFET technology. This technology gives it the major advantage of operating with negligible, or even zero, voltage drop.

What are the advantages of MOSFET technology for battery charging?

MOSFET technology offers several key advantages:

It minimizes voltage drop, ensuring batteries receive the full charging voltage from the alternator or charger.It optimizes battery lifespan and speeds up recharging.It isolates battery banks, preventing mutual discharge.It automatically distributes current to the least charged battery for maximum efficiency.

How many inputs and outputs does this battery combiner have?

The QUICK RC162 charge distributor is equipped with one input (1E) and two outputs (2S). This means it can take power from a single source and distribute it to two separate battery banks.

What is the maximum charging current that the QUICK RC162 distributor can handle?

The QUICK RC162 charge distributor is designed to manage a maximum charging current of 160 amperes (160A) per input.

Does the RC162 splitter have an operating indicator?

Yes, the QUICK RC162 load distributor is equipped with an LED operating indicator that allows you to view its status.

Does the QUICK RC162 load distributor require active cooling?

No, the QUICK RC162 load distributor is designed with passive cooling. This contributes to its reliability and ensures silent operation.

What are the physical dimensions of the QUICK RC162 load distributor?

The dimensions of the QUICK RC162 load distributor are 195 mm in length, 68 mm in height, and 135 mm in depth (195 x 68 x 135 mm).

What is the approximate weight of the QUICK RC162 splitter?

The approximate weight of the QUICK RC162 load distributor is about 1.2 kg.

How does the QUICK RC162 distributor ensure isolation of battery banks?

The QUICK RC162 charge distributor uses MOSFET technology to effectively isolate the different battery banks connected. This isolation prevents any mutual discharge between batteries, ensuring that each bank maintains its charge independently of the others.

Does the distributor supply current equally to all batteries?

No, the QUICK RC162 splitter does not distribute current equally, but in an optimized way. It automatically prioritizes sending current to the least charged battery, ensuring faster and more efficient charging of the entire system.

Is this splitter suitable for marine use?

Yes, the QUICK RC162 load distributor is designed for use in various marine environments, as indicated in its description. Its compact design makes it easy to integrate aboard boats.

What is the reference number of this load distributor model?

The model reference for this battery distributor is RC162. It is also known under the designations ECS162 or FBECS1620000D00.

With which voltage systems is the QUICK RC162 splitter compatible?

The QUICK RC162 charge distributor is compatible with 12V and 24V electrical systems.

What is the input voltage range accepted by this splitter?

The QUICK RC162 charge distributor is compatible with an input voltage range from 5 to 31 Vdc.

Can this splitter be used with different types of batteries?

The QUICK RC162 charge distributor is designed to efficiently and independently charge multiple battery banks in 12V and 24V systems. It is compatible with batteries commonly used in marine and vehicle applications, provided they meet the 12V or 24V operating voltage requirements.

Can the RC162 splitter be used with a shore power charger in addition to an alternator?

Yes, the QUICK RC162 charge distributor is designed to charge multiple battery banks from a single charging source. This typically includes alternators, but also other sources such as shore power chargers, provided the input voltage range (5 to 31 Vdc) and maximum current (160A) are respected.

In which position can the QUICK RC162 load distributor be installed?

The QUICK RC162 charge distributor offers flexible installation and can be mounted in vertical or horizontal position, making it easier to integrate into various environments.

Is the wiring of the splitter complex?

The compact design of the QUICK RC162 splitter is intended to simplify installation and wiring. It is recommended to carefully follow the user manual instructions for correct and safe installation.

Is specific space for cooling required during installation?

The QUICK RC162 splitter uses passive cooling. Although it does not require space for forced airflow, it is still advisable to install it in a location with good ambient air circulation to optimize its lifespan and performance.