Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Raymarine

A80247

Cablu RayNet către RJ45 - 100mm

Le câble RayNet vers RJ45 Raymarine A80247 de 100mm permet l'intégration de votre réseau RayNet avec des équipements Ethernet RJ45 standard. Cette solution compacte est conçue pour des connexions courtes, facilitant les diagnostics ou l'accès réseau. Il est fourni seul, sans accessoires.

Prix publicBénéficier du tarif pro

69,61€

69,61€ ~~78,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de conector	RayNet (mâle) / RJ45 (femelle)
Tip cablu	Câble réseau
Lungimea cablului	0.1
Rețea compatibilă	RayNet, Ethernet
Rețea cablată	Ethernet
Temperatură de funcționare	-15°C à +55°C
Temperatură depozitare	-20°C à +70°C
Indice IP	IPX6/IPX7
Certificări	CE,IEC 60945
Tipul produsului	Accessoire de câblage
Modele compatibile	Écrans multifonctions Raymarine (Axiom, Element, etc.), radars Quantum, et tout appareil Raymarine doté d'un port RayNet.

Description détaillée

Cablul RayNet către RJ45 de 100mm (referință A80247) de Raymarine este un adaptor esențial pentru integrarea sistemelor de navigație marină. Conceput pentru a facilita conectivitatea între ecosistemul RayNet al Raymarine și rețelele Ethernet standard RJ45, acest cablu de 100mm oferă o soluție compactă pentru instalații care necesită o legătură scurtă și directă.

Conectivitate și compatibilitate

Acest cablu permite conectarea unui dispozitiv RayNet, precum un ecran multifuncțional Axiom sau un radar Quantum, la un echipament dotat cu un port RJ45. Această funcționalitate este utilă în special pentru accesul la rețeaua locală a navei, conectarea la PC-uri pentru actualizări software sau diagnosticare, sau integrarea în switch-uri Ethernet ne-marine. Spre deosebire de cablurile RayNet directe care conectează dispozitive Raymarine între ele, A80247 servește drept punte către infrastructuri de rețea generice, oferind o flexibilitate crescută a integrării.

Integrare în sistemul Raymarine

În gama de cabluri de rețea Raymarine, A80247 se remarcă prin funcția sa de adaptor scurt. În timp ce cablurile RayNet de diferite lungimi (de exemplu, cabluri RayNet de 1m, 3m, 5m) sunt folosite pentru interconectarea dispozitivelor Raymarine în mod etanș și sigur, acest model de 100mm este conceput special pentru o tranziție punctuală către un port RJ45 standard. El completează soluțiile de cablare existente, permițând o gestionare simplificată a configurațiilor de rețea eterogene la bord.

Avis de l'expert

Pol CONIN

Responsabil digital

« RayNet to RJ45 adapter: Bridge to standard Ethernet »

The RayNet to RJ45 100mm adapter cable, part number A80247, is a critical component for integrators and users seeking to interconnect their proprietary RayNet network with more generic Ethernet equipment. Its ultra-short 100mm length makes it ideal for space-constrained applications, such as behind a multifunction display for direct connection to a diagnostic PC or a compact Wi-Fi router, without adding cable clutter. It is well-suited for quick software updates or remote access via a local network.

This cable differs from longer RayNet cables and waterproof couplers by its specific role as a temporary adapter. It is not designed for primary network connections between Raymarine displays or sensors, which require waterproof RayNet-to-RayNet cables for longer runs. Its optimal use is for service, configuration, or temporary connections to non-marine equipment. Note that it converts a waterproof RayNet connection into a standard RJ45 connection, which is less resistant to marine environments. Therefore, the RJ45 connection must be shielded from moisture and water spray.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu RayNet către RJ45 - 100mm

69,61€

69,61€ ~~78,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine RayNet to RJ45 100mm cable (A80247) used for?

This adapter cable is designed to connect a RayNet device (such as a Raymarine Axiom multifunction display or a Quantum radar) to equipment with a standard RJ45 Ethernet port. It enables integration of Raymarine systems with local networks or computers for diagnostics or updates.

What is the exact length of this RayNet to RJ45 adapter cable?

The length of this adapter cable is 100 millimeters (10 centimeters). It is specifically designed for short and direct connections, acting as a compact bridge between the two types of connectors.

What is the difference between a RayNet connector and an RJ45 connector?

The RayNet connector is a proprietary Ethernet connector from Raymarine, designed for marine environments. It is robust, watertight, and secure for interconnecting navigation equipment. The RJ45 connector is a standard Ethernet connector, commonly used for home and professional computer networks, but it is not inherently watertight or marine-rated.

Which types of Raymarine devices can be connected with this cable?

This cable can be used to connect Raymarine devices equipped with a RayNet port. This typically includes multifunction displays (such as the Axiom series), radars (such as Quantum radars), and other Raymarine network devices that use this type of Ethernet connector.

Which standard equipment can I connect the RJ45 end of this cable to?

The RJ45 end of this cable can be connected to various standard Ethernet devices. This includes personal computers (PC) for diagnostics or software updates, non-marine Ethernet switches, or any other device compatible with a standard RJ45 network connection for integration into the vessel's network.

Why is this adapter cable only 100mm long?

This cable is specifically designed as a short adapter to facilitate a compact, temporary transition between a RayNet port and a standard RJ45 port. Its short length is ideal for installations where the two devices are very close, avoiding the clutter of longer cables and simplifying the management of heterogeneous network configurations.

Can I use this cable to connect two Raymarine multifunction displays together?

No, this cable is not designed to directly connect two Raymarine devices equipped with RayNet ports. It is used to connect a RayNet device to equipment with a standard RJ45 Ethernet port. To interconnect two Raymarine devices via RayNet, dedicated RayNet-to-RayNet cables of various lengths are required.