Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 6%

Raymarine

E55054

Cablu SeaTalk Alarm Out 1,5m

Conçu pour les réseaux Raymarine SeaTalk (première génération), le câble SeaTalk Alarm Out E55054 de 1,5m permet de connecter une sortie d'alarme d'instrument à un système d'alerte externe. Essentiel pour étendre la portée des alarmes critiques à bord, il maintient la sécurité des installations legacy. Ce produit inclut le câble SeaTalk Alarm Out de 1,5m.

Prix publicBénéficier du tarif pro

78,47€

78,47€ ~~84,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Secțiune (mm²)	0.5
Secțiune (AWG)	20.0
Număr de conductori	3.0
Culoare	Noir
Tensiune maximă	30.0
Ecranare	Blindé
Flexibilitate	Flexible
Tip curent	DC
Curent nominal	1.0
Material manta	PVC
Material conductor	Cuivre étamé
Certificări	CE
Finisaj conductor	Étamé
Tip cablu	Câble de commande
Lungimea cablului	1.5
Rețea compatibilă	Raymarine SeaTalk (première génération)
Conectoare pre-montate	Oui
Amplasament instalare	Intérieur du navire, tableau de bord
Aplicație cablu	Transmission de signal d'alarme
Temperatură de funcționare	-15°C à +55°C
Temperatură depozitare	-20°C à +70°C
Tip de conector	Raymarine SeaTalk (propriétaire) / Fils nus
Tip ecranare	Blindage tressé
Rezistență UV	Limitée
Tipul produsului	Câble

Description détaillée

Cablul SeaTalk E55054 de la Raymarine este proiectat pentru integrarea unui semnal de alarmă extern într-o rețea SeaTalk de primă generație. Cu o lungime de 1,5 metri, acest cablu permite conectarea ieșirii de alarmă a unui instrument sau a unui ecran multifuncțional compatibil SeaTalk la un dispozitiv de alertare sonoră sau vizuală extern. Asigură astfel transmiterea alertelor critice generate de sistemele de navigație, precum alarmele de adâncime, vânt sau coliziune, către o claxon, un buzzer sau un indicator luminos extern.

Integrare și compatibilitate

Acest cablu E55054 este destinat exclusiv instalațiilor echipate cu arhitectura SeaTalk originală Raymarine. Spre deosebire de rețelele mai noi precum SeaTalkNG (bazat pe NMEA 2000), care oferă capacități de integrare mai largi și diagnostice avansate, SeaTalk-ul inițial necesită accesorii dedicate pentru fiecare funcție specifică. Modelul E55054 se încadrează în această logică, oferind o soluție directă pentru extinderea alarmelor fără a necesita interfețe complexe. Este un component esențial pentru menținerea funcționalității de alertare pe sistemele SeaTalk existente.

Funcționalitate și utilizare

Cu o lungime de 1,5 metri, cablul E55054 oferă o rază standard de conectare pentru alarme. Se poziționează ca piesă de schimb sau accesoriu de extensie pentru proprietarii de ambarcațiuni care doresc să optimizeze sistemul de alertare SeaTalk. Comparativ cu soluțiile moderne, unde alarmele pot fi gestionate prin rețele NMEA 2000 sau aplicații mobile, acest cablu răspunde unei nevoi precise pentru configurații specifice. Permite ca alarmele să nu se limiteze la afișarea pe ecranul principal, ci să fie transmise către zone cheie ale bărcii, asigurând o reacție mai rapidă a echipajului.

Avis de l'expert

Pol CONIN

Responsabil digital

« SeaTalk alarm extension: a solution for legacy systems »

The SeaTalk Alarm Out E55054 cable is an essential component for any vessel equipped with a first-generation SeaTalk network looking to expand its alert capabilities. Its practical value lies in its ability to relay critical alarms (depth, engine, AIS collision if a transponder is connected to the network) to an external audio or visual device, ensuring the crew does not miss any alerts, even when away from the navigation console. This is particularly relevant for boats where instruments are primarily at the helm station and a buzzer in the cabin or on deck is required.

Installing this cable is relatively straightforward, connecting directly to the alarm output of a compatible SeaTalk device and the input of an external alarm system (buzzer, light, horn). It is important to note that this cable is specifically designed for the SeaTalk protocol (often referred to as SeaTalk1), a proprietary Raymarine architecture now considered legacy compared to SeaTalkNG (NMEA 2000). Its use is therefore limited to existing systems or their extensions. It does not integrate directly into an NMEA 2000 network without the addition of a conversion gateway. Its 1.5-meter length may require the use of extensions or strategic positioning of the external alarm.

Choosing this E55054 cable means maintaining the functionality and safety of an established SeaTalk system. There is no true direct alternative if you wish to connect an external alarm to a pure SeaTalk network without resorting to more expensive and complex protocol converters. Its robustness meets the standards of a standard marine cable, designed to withstand the marine environment. It should be avoided for new installations based on NMEA 2000, where native alarm solutions are available.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu SeaTalk Alarm Out 1,5m

78,47€

78,47€ ~~84,00€~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

AIS 700 CLASĂ B cu SPLITTER de antenă integrat

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

Trisonondă Analogică DST800

Ref : A22154

301,03€

301,03€ ~~336,00€~~

Raymarine

Senzor viteză/temperatură ST800-P120

Ref : E26031

149,83€

149,83€ ~~156,00€~~

Raymarine

Pachet i50 & i60 Vânt, Viteză, Adâncime

Ref : E70153

2.096,68€

2.096,68€ ~~2.220,00€~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Raymarine

Indicator Digital i50 Tridata

Ref : E70060

567,25€

567,25€ ~~654,00€~~

Raymarine

Afișaj i50 Depth sonor

Ref : E70059

514,55€

514,55€ ~~594,00€~~

Raymarine

Afișaj i60 vânt

Ref : E70061

560,23€

560,23€ ~~594,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the SeaTalk alarm cable Raymarine E55054 used for?

The Raymarine E55054 cable is designed to connect the alarm output of an instrument or multifunction display compatible with first-generation SeaTalk network to an external audio or visual alert device. It relays critical alarms generated by your navigation systems to a horn, buzzer, or remote light.

What is the length of this SeaTalk alarm cable?

The SeaTalk alarm cable Raymarine E55054 has a length of 1.5 meters.

Is the E55054 cable compatible with Raymarine SeaTalkNG systems?

No, this cable is specifically designed for installations with Raymarine’s original SeaTalk architecture. It is not compatible with newer networks such as SeaTalkNG, which is based on the NMEA 2000 standard and uses different cables and connectors.

What types of alerts can this cable transmit?

This cable can transmit critical alerts generated by SeaTalk navigation systems, such as:

Depth alarmsWind alarmsCollision alarmsOther system alerts configured on compatible instruments.

Which types of external alert devices can this cable be connected to?

The E55054 cable connects the alarm output to various external alert devices, whether they are audio or visual. This typically includes:

A horn
A buzzer
A light beacon

With which Raymarine systems is this cable specifically compatible?

This cable is compatible with Raymarine multifunction displays and instruments that use the first-generation SeaTalk network. It is designed for existing systems requiring an extension of alarm capabilities via this specific architecture.

Why use an external alarm cable if the alarm is already displayed on the main screen?

Using an external alarm cable allows alerts to be relayed to key areas of the boat where the main screen is not always visible or audible. This ensures better crew responsiveness in case of a critical alert, even if you are not directly in front of the navigation instrument.

What does the designation "Alarm Out" mean on this cable?

The "Alarm Out" designation means this cable is designed to transmit an alarm signal from a SeaTalk-compatible Raymarine device to an external alert device. It does not receive alarms; it broadcasts them.

Nos réalisations sur-mesure

Toutes nos réalisations

Imoca Doudous 2025

Installation complète

Ocean50 EdenRed 2025

Installation complète

American Magic 2022

Distribution de puissance

Gunboat 80 Grande croisière

Conception et câblage puissance

Limbă

Țară/Regiune

Cablu SeaTalk Alarm Out 1,5m

Caractéristiques techniques

Alege opțiunea