Kit mise à jour de l’unité de puissance ST4000 à MKII

Autopilot Mk II Wheel Drive and Installation Kit

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 6%

Raymarine

E12093

Kit de actualizare unitate de putere ST4000 la MkII

Conçu pour les propriétaires de pilotes automatiques ST4000, le kit Raymarine E12093 permet une mise à jour vers l'unité de roue motrice Mk II, offrant une compatibilité avec les systèmes de direction de 1 à 3.5 tours de butée à butée et les roues de 3 à 8 rayons. Ce kit intègre une unité de puissance moderne au système ST4000 existant. Le kit inclut l'unité de roue motrice, le support de piédestal, des inserts de serrage de rayon, des vis, des forets, une clé Allen, des rotules, un câble d'alimentation de 4.5m et, si fourni, un capteur d'angle de barre.

Prix publicBénéficier du tarif pro

917,30€

917,30€ ~~978,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de montaj	Fixation sur roue et sur piédestal
Material	Plastique ABS et métal
Culoare	Noir
Modele compatibile	Pilotes automatiques Raymarine ST4000
Dimensiuni produs	Diamètre global : 361 mm ; Diamètre couverture avant : 228 mm ; Hauteur : 135 mm ; Tube moteur : Ø 48 mm, longueur 171 mm (+ 60 mm dégagement câble)
Finisare	Gris mat
Tipul instalației	Fixation sur roue et piédestal
Conținut kit	Unité de roue motrice, support de piédestal, 3 inserts de serrage de rayon 16 mm, 3 inserts de serrage de rayon 12 mm, 3 colliers de serrage de rayon, 6 vis de serrage M5 x 16 mm, 4 vis de support n° 10 x 3/4 in, forets (6 mm, 4 mm), clé Allen 3 mm, 2 rotules, goupille de barre, 3 vis à tête cylindrique n° 8 x 3/4 in, goujon, 2 écrous, 2 vis à tête fraisée n° 8 x 3/4 in, câble d'alimentation 4.5 m, clip de câble et vis, capteur de position de gouvernail (si fourni)
Tipul produsului	Unité d'entraînement de roue pour pilote automatique

Description détaillée

Kit-ul de actualizare Raymarine E12093 este conceput pentru proprietarii sistemelor de pilot automat ST4000 care doresc să modernizeze unitatea lor de putere. Acest kit înlocuiește unitatea veche cu un sistem de acționare cu roată Mk II, integrând astfel tehnologia pilotelor automate din gama Evolution a Raymarine. Este o soluție pentru prelungirea duratei de viață a sistemelor ST4000 existente prin îmbunătățirea performanței unității de comandă a cârmei.

Compatibilitate și Caracteristici Tehnice

Unitatea de acționare cu roată furnizată în acest kit este compatibilă cu volane cu 3, 4, 5, 6, 7 sau 8 spițe. Este proiectată să funcționeze cu sisteme de direcție cu unghi de rotație între butoane între 1 și 3,5 rotații. Unitatea are un diametru frontal de acoperire de 228 mm (9,0 in) și un diametru total de 361 mm (14,2 in). Înălțimea este de 135 mm (5,3 in), cu un tub motor de 48 mm (1,9 in) diametru și o lungime de 171 mm (6,7 in), necesitând un spațiu suplimentar de 60 mm (2,4 in) pentru cablu. Această unitate se integrează cu controlerul existent al pilotului automat ST4000, oferind o actualizare țintită, nu un înlocuire completă a sistemului.

Instalare și Conținutul Kit-ului

Instalarea unității de acționare cu roată implică fixarea acesteia pe volan folosind găurile de strângere ale spițelor pre-găurite în capacul frontal și conectarea la unitatea de comandă existentă. Kit-ul E12093 include unitatea de acționare cu roată propriu-zisă, un suport de piedestal, trei inserții de strângere a spiței de 16 mm și trei de 12 mm, trei coliere de strângere a spiței, șase șuruburi de strângere M5 x 16 mm, patru șuruburi de suport nr. 10 x 3/4 in, burghie de 6 mm și 4 mm, o cheie Allen de 3 mm, două articulații sferice, un bolț de bară, trei șuruburi cu cap cilindric nr. 8 x 3/4 in, un bolț filetat, două piulițe, două șuruburi cu cap înecat nr. 8 x 3/4 in, un cablu de alimentare de 4,5 m (15 ft), un clip pentru cablu și o șurub nr. 6 x 1/2 in, precum și un senzor de unghi al barei, dacă este inclus inițial. Un kit de montaj opțional pentru piedestal/perete despărțitor (E15017) poate fi necesar în funcție de configurație.

Documentations

Type	Nom
	EN - Notice d'installation - Kit mise à jour de l’unité de puissance ST4000 à MKII

Avis de l'expert

Pol CONIN

Responsabil digital

« ST4000 upgrade: autopilot performance and integration »

This Raymarine E12093 kit is a practical and cost-effective solution for navigators equipped with an ST4000 autopilot who want to upgrade to a more modern power unit without replacing their entire system. By integrating the Mk II wheel drive, this kit enables a transition to a more responsive and potentially higher-performance tiller drive, aligned with Raymarine’s Evolution series standards.

In terms of installation, the process is manageable for a knowledgeable user. The instructions cover key steps such as securing the unit to the wheel spokes (using pre-drilled holes) and attaching the bracket (which may require drilling). It is critical to follow EMC installation guidelines to avoid interference, particularly by maintaining adequate clearance from radio transmission equipment. Compatibility with wheels featuring 3 to 8 spokes and steering systems with 1 to 3.5 turns lock-to-lock covers a wide range of cruising sailboats.

The practical value of this kit lies in its ability to revitalize an existing system. Rather than investing in a complete autopilot, this kit offers a targeted upgrade, optimizing the cost-to-benefit ratio for the user. It is particularly relevant for boats where the ST4000 controller is still functional and where the mechanical part of the steering system needs improvement. However, it is essential to verify that the rest of the system (rudder sensor, compass) is in good condition to fully benefit from this update.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Kit de actualizare unitate de putere ST4000 la MkII

917,30€

917,30€ ~~978,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine E12093 update kit?

The Raymarine E12093 update kit is designed to modernize existing ST4000 autopilot systems. It replaces the old power unit with a Mk II wheel drive, integrating the technology from Raymarine's Evolution autopilot range. This kit aims to enhance the performance of the helm control unit and extend the lifespan of ST4000 systems.

Which types of wheels are compatible with the drive unit of this kit?

The drive unit provided in this kit is compatible with spokes in 3, 4, 5, 6, 7, or 8-spoke wheels.

What are the dimensions of the drive unit included in the E12093 kit?

The drive unit has a front cover diameter of 228 mm (9.0 in) and an overall diameter of 361 mm (14.2 in). Its height is 135 mm (5.3 in). The motor tube has a diameter of 48 mm (1.9 in) and a length of 171 mm (6.7 in), requiring an additional 60 mm (2.4 in) clearance for the cable.

Is this kit a complete replacement for the ST4000 autopilot system?

No, this kit is a targeted upgrade. It replaces the power unit with a Mk II wheel drive and integrates with the existing ST4000 autopilot controller, but does not constitute a full system replacement.

Which components are included in the E12093 update kit?

Kit E12093 includes the following items:

The drive wheel unitA pedestal mountThree 16 mm spoke clamping insertsThree 12 mm spoke clamping insertsSix clamping collarsSix M5 x 16 mm clamping screwsFour #10 x ¾ in support screwsA 6 mm drill bitA 4 mm drill bitA 3 mm Allen keyTwo ball jointsOne tiller pinThree #8 x ¾ in cheese-head screwsOne studTwo nutsTwo #8 x ¾ in countersunk screwsA 4.5 m (15 ft) power cableOne cable clip and one #6 x ½ in screw

What are the main steps to install the drive unit?

Installing the drive wheel unit involves four main steps:

Drilling the clamping holes for the spokes in the front cover.Attaching the drive wheel unit to the wheel.Attaching the pedestal bracket.Connecting the drive to the existing control unit.

Is the drive unit compatible with all steering systems?

The unit is designed to operate with steering systems having between 1 and 3.5 turns from hard-over to hard-over.

Should the cover be removed from the drive unit before installation?

Yes, it is necessary to remove the cover from the drive unit. The cover is held by three "push-fit" posts that insert into three sockets on the drive ring. To remove it, hold the motor with one hand and pull the cover upward and away from the drive unit.

How to identify the correct spoke holes for tightening on the front cover?

The spoke holes inside the cover are numbered. Position the arrow on the cover upwards and refer to the diagrams in the manual to identify the correct holes based on your wheel’s spoke count (for example, for a 5-spoke wheel, drill the 4 holes marked '5'). It is recommended to mark the holes and check their alignment by placing the cover against your wheel.

Is it necessary to cut or modify the supplied cables?

Raymarine's EMC installation guidelines recommend using the cables specified by Raymarine. Cutting and reconnecting these cables can compromise EMC performance and should be avoided unless detailed in the installation manual.

Are there any precautions to take regarding the electrical power supply during installation?

Yes, it is crucial to ensure that the power supply is cut off before making any electrical connection for safety reasons.

Does the product require calibration after installation?

Yes, although the product is supplied with default settings, it is necessary to complete the commissioning procedures detailed in the "Commissioning" section of the relevant autopilot controller manual to ensure optimal performance on your sailboat.

Where should I register my Raymarine product for warranty?

To register your new Raymarine product, you can do so on the Raymarine website at www.raymarine.com/warranty.

What are the recommendations to avoid electromagnetic interference (EMC)?

For optimal EMC performance, Raymarine equipment and connected cables should be:

At least 1 metre (3 feet) away from any equipment transmitting or cables carrying radio signals (e.g., VHF radios, cables, and antennas). For HF radios, this distance must be increased to 2 metres (7 feet).More than 2 metres (7 feet) away from the path of a radar beam.The equipment must be powered by a separate battery from the one used for engine starting, to avoid voltage drops and starter transients that could cause the equipment to reset.

What is the role of this kit compared to Raymarine's Evolution technology?

This kit allows integrating Raymarine Evolution autopilot technology into an existing ST4000 system by replacing the power unit with a Mk II wheel drive.

Is the E12093 kit compatible with autopilot controllers other than the ST4000?

The kit is specifically designed as a "ST4000 power unit upgrade kit to MKII" and integrates with the existing ST4000 autopilot controller. It is not stated to be compatible with other controllers.

What is the length of the power cable supplied with the kit?

The kit includes a power cable with a length of 4.5 meters (15 feet).

Is the kit supplied with the necessary tools for drilling?

Yes, the kit includes a 6 mm drill bit and a 4 mm drill bit, as well as a 3 mm Allen key, required for certain installation steps.

What is the function of the pedestal mount included in the kit?

The pedestal mount is a component included in the kit, essential for securing the drive unit to the helm's wheel column on your boat, ensuring a stable and secure installation.