Placă de adaptare AXIOM 16 PRO pentru decupaj E140W/e165

This Raymarine A80533 adapter plate is specifically designed to allow installation of an Axiom 16 Pro multifunction display in an existing dashboard cutout. It is compatible with cutouts originally intended for older Raymarine E140W or e165 models.

No, this mounting plate is specifically designed for the Axiom 16 Pro display. The dimensions and mounting points may differ for the standard Axiom 16 models, making this plate incompatible.

No, the Raymarine A80533 mounting plate is exclusively designed for Raymarine multifunction displays. It allows adapting specific cutouts for older Raymarine models (E140W/e165) to install a new Raymarine Axiom 16 Pro display.

No, this mounting plate is specifically designed for the cutouts of the E140W and E165 models. The cutout dimensions for an E120W are different, and this plate would not fit.

No, the E140W and e165 displays belonged to an earlier generation of Raymarine systems. The Axiom 16 Pro, on the other hand, runs on the modern LightHouse 4 operating system, providing improved features and user interface.

The Raymarine A80533 mounting plate is made from a material specifically selected for its suitability in a marine environment. This ensures its resistance to typical conditions encountered at sea, such as humidity and temperature variations.

According to the technical drawing, the mounting plate has external dimensions of approximately 456.0 mm in width and 297.4 mm in height. The internal cutout for the Axiom 16 Pro is approximately 436.1 mm in width and 242.1 mm in height.

Using this adapter plate provides a seamless aesthetic and functional transition when replacing your old display. It avoids complex, costly, and potentially unsightly modifications to the dashboard, ensuring a clean and quick integration of your new Axiom 16 Pro.

Yes, the Raymarine A80533 mounting plate is specifically sized to fully cover the existing cutout of the E140W or e165 displays, providing a clean and professional finish when installing the Axiom 16 Pro.

Installing the mounting plate itself should not require any tools beyond those commonly used for mounting marine equipment (screwdriver, drill if new holes are needed for the Axiom 16 Pro). It is recommended to consult the Axiom 16 Pro installation manual for full details.

Yes, to install the mounting plate, the old Raymarine E140W or E165 display must be completely removed from its housing. The plate is then inserted into this existing cutout to prepare for the installation of the new Axiom 16 Pro.

The mounting plate is designed for clean integration. However, the final watertightness of the installation will depend on the seal used with the Axiom 16 Pro display itself and installation practices. It is crucial to follow the Axiom 16 Pro manual’s recommendations regarding sealing to ensure adequate water protection.

Handle the panel with care to avoid scratches. Ensure the helm display surface is clean and dry before installation. Also check the alignment of the panel and the Axiom 16 Pro screen before tightening the fasteners permanently.

No, the mounting plate is designed to fit into an existing cutout (E140W/e165) and provides the surface to mount the Axiom 16 Pro. The cutout template for the Axiom 16 Pro itself is usually supplied with the display or available in its documentation.

The manufacturer's information does not specify whether the plate can be painted. Any modification to the plate could potentially affect its durability or compatibility with the marine environment. It is generally not recommended to modify accessories without the manufacturer's approval.

The mounting plate is designed to fit a specific cutout and to accommodate a precise screen. It is important to follow the installation instructions to ensure it is installed the correct way round, guaranteeing the correct alignment of the Axiom 16 Pro display.