Sonde sondeur et température B60 inclinée à 12° (Branchement CP370 )

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 3%

Raymarine

E66086

Sondă sondeur și temperatură B60 înclinată la 12° (Conectare CP370)

Conçue pour les systèmes Raymarine, la sonde B60 E66086 est une sonde traversante en bronze inclinée à 12° intégrant les fonctions sondeur et température.

Elle offre des lectures fiables pour les coques en fibre de verre avec un angle de varangue de 8° à 15°, et se connecte au module sondeur CP370.

Le produit inclut la sonde B60 avec son câble de raccordement et les accessoires de montage standard pour une installation traversante.

Prix publicBénéficier du tarif pro

435,90€

435,90€ ~~450,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	Sondeur conventionnel
Frecvențe sonar	50/200
Putere de vârf	4800.0
Adâncime maximă de citire	350.0
Material sondă	Bronze
Tip conector sonar	7 broches Raymarine
Lungimea cablului	10.0
Lățimea produsului	88 mm
Senzor de temperatură integrat	Oui
Înălțimea produsului	95 mm
Afișaje compatibile	Module sondeur Raymarine CP370
Adâncime produs	74 mm
Indice IP	IPX8
Tip de montaj	Traversante
Certificări	CE
Domeniu de măsurare temperatură	-10°C à 40°C
Unghi de acoperire al fasciculului	45° (50 kHz) / 12° (200 kHz)
Tip de pescuit	Mer
Senzor de viteză integrat	Non
Nivel utilizator	Intermédiaire
Garantie	2.0

Accessoires

Raymarine Câble d'adaptation (8 vers 25) sonde CP370 sur Axiom RV

Cablu de adaptare (8 către 25) sondă CP370 pe Axiom RV

66,89€

66,89€ ~~78,00€~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

41,58€

41,58€ ~~48,00€~~

Cumpără

Cablu dorsal SeaTalk NG Raymarine, lungime 1 metru

38,81€

38,81€ ~~42,00€~~

Cumpără

Description détaillée

Concepută pentru o integrare directă cu sistemele de sondeur tradiționale Raymarine, sonda sondeur și temperatură B60 E66086 de la Raymarine este o soluție traversantă din bronz, înclinată la 12°. Este specific adaptată pentru carene din fibră de sticlă cu un unghi de varangă (deadrise) cuprins între 8° și 15°, asigurând astfel o orientare optimă a fasciculului fără a necesita sabot de compensare extern.

Performanță și compatibilitate

Această sondă furnizează date privind adâncimea și temperatura apei. Proiectarea traversantă minimizează turbulențele și oferă citiri fiabile, inclusiv la viteze de navigație mai mari, avantaj distinct față de sondele de tablou din spate precum P66. Sonda B60 E66086 este compatibilă cu modulul sondeur Raymarine CP370, permițând accesul la capacitățile de detecție tradiționale. Se poziționează ca o alegere intermediară și fiabilă, oferind beneficiile unei instalări traversante fără investiția necesară pentru sondele CHIRP avansate precum modelele B175HW sau sondele cu sabot de compensare precum B744V, care sunt destinate aplicațiilor de pescuit mai specifice sau adâncimilor extreme.

Durabilitate marină

Fabricată din bronz, sonda E66086 este proiectată pentru o rezistență sporită la mediul marin salin. Instalarea necesită găurirea carenei, dar asigură o protecție mecanică superioară și o expunere minimă la șocuri comparativ cu transductoarele externe. Această caracteristică o face potrivită pentru navele supuse unor condiții de navigație variate, unde fiabilitatea semnalului este primordială.

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the Raymarine B60 depth sounder tilted at 12° »

The Raymarine B60 E66086 transducer is a sound choice for fiberglass boat owners seeking a reliable, integrated fishfinder and temperature solution. Its fixed 12° tilt is optimized for deadrise angles between 8° and 15°, eliminating the need for an additional fairing block and simplifying installation while reducing hydrodynamic drag.

The main advantage of this through-hull bronze transducer lies in signal quality. Unlike transom-mount transducers, which can be affected by propeller or hull turbulence, the B60 ensures a clean water flow over the transducer element, delivering accurate depth readings even at high speeds. For installation, precise hull drilling and rigorous sealing are required to prevent water ingress. The bronze construction provides superior durability and corrosion resistance in saltwater environments, making it a long-term investment. However, it is critical to note that it is not suitable for wooden, steel, or aluminum hulls without specific isolation precautions. Designed for traditional frequencies (typically 50/200 kHz) and compatible with the CP370 module, it targets standard fish detection and depth measurement needs rather than high-resolution imaging requirements.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sondă sondeur și temperatură B60 înclinată la 12° (Conectare CP370)

435,90€

435,90€ ~~450,00€~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Afișaj i50 Depth sonor

Ref : E70059

514,55€

514,55€ ~~594,00€~~

Raymarine

Indicator Digital i50 Tridata

Ref : E70060

567,25€

567,25€ ~~654,00€~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What information does the Raymarine B60 depth sounder provide?

This B60 fishfinder and temperature transducer from Raymarine is designed to provide two types of essential data:

Water depth: It measures the distance between the seabed and the underside of your boat.Water temperature: It provides the current temperature of the water in which your vessel is navigating.

For which hull type is the B60 transducer tilted at 12° suitable?

The B60 transducer tilted at 12° is specifically designed for fiberglass hulls. It is intended for boats with a deadrise angle between 8° and 15°. Its 12° tilt optimally directs the beam without requiring an external fairing block.

Which Raymarine module is this transducer compatible with?

This B60 depth sounder and temperature transducer (E66086) is compatible with the Raymarine CP370 sounder module. It is designed to integrate directly with traditional sounder systems that use this module.

What are the advantages of a B60 through-hull transducer compared to a transom-mount transducer?

The B60 through-hull transducer offers several advantages over transom-mount transducers, such as the P66:

It minimizes turbulence, ensuring more reliable readings.It maintains stable performance, even at higher cruising speeds.Its through-hull installation provides superior mechanical protection and minimal exposure to impacts.

Why is the B60 transducer angled at 12°?

The B60 transducer is angled at 12° to compensate for the deadrise angle of your boat’s hull. This tilt directs the depth sounder’s beam vertically toward the seabed, ensuring accurate readings without requiring an external fairing block, for hulls with a deadrise between 8° and 15°.

What material is the Raymarine B60 depth sounder made of?

The Raymarine B60 (E66086) transducer is made of bronze. This material is selected for its enhanced resistance to the saline marine environment, ensuring optimal durability and reliability in varied sailing conditions.

Does installing this depth sounder require drilling through the hull?

Yes, the Raymarine B60 transducer installation is "through-hull". This means it requires drilling the hull of your boat for proper mounting and optimal performance.

Is this B60 transducer compatible with CHIRP systems?

No, the Raymarine B60 transducer (E66086) is designed for traditional fishfinder systems. It is not a CHIRP transducer and therefore not compatible with the advanced detection capabilities of CHIRP systems, such as those using the B175HW models.