Sondă bronz traversantă cu fascicul conic HIGH CHIRP, unghi 20° CPT-S, cablu 10 m

The Raymarine CPT-S E70341 transducer uses HIGH CHIRP conical beam technology. This technology emits a frequency sweep over a wide band, enabling better target separation and superior image clarity for precise fish detection and water column analysis.

This through-hull bronze transducer is particularly suited to fiberglass and wooden hulls. Its design includes a 20° angle, making it optimal for hulls with a deadrise angle (hull bottom angle) between 16° and 24°.

No, it is critical never to test or operate the transducer out of the water. Operating it dry can cause overheating of the transducer and result in irreversible damage to the device.

The Raymarine CPT-S E70341 transducer comes with a 10-meter cable. This length is designed to facilitate installation on a variety of vessels.

The CPT-S E70341 transducer is compatible with Raymarine CP100 sounder modules and Dragonfly multifunction displays equipped with CHIRP technology.

The HIGH CHIRP conical beam technology of the CPT-S focuses on precise fish detection and water column analysis. It stands out from other Raymarine technologies such as:

DownVision probes (CPT-D) that excel in structural seabed imaging. Newer systems like RealVision 3D that provide a three-dimensional view. The CPT-S offers better target separation and superior image clarity compared to traditional fixed-frequency sounders thanks to its wide-band frequency sweep.

To maintain your depth sounder’s performance, it is recommended to clean it regularly. Use a soft cloth and a mild household detergent. If fouling is severe, you can use a scrubbing pad such as a green Scotch Brite™ pad, taking care not to scratch the face of the transducer.

To prevent marine growth buildup, you can apply a thin coat of water-based antifouling paint to the transducer. Never use ketone-based paint, aggressive solvents such as acetone, or spray paint, as these could damage the transducer.

Yes, cutting the transducer cable voids the product warranty and also invalidates the European CE mark. A cut transducer cable cannot be repaired and must be replaced.