Suport de punte

The installation of the Raymarine T004 deck bracket is designed as a permanent fixture. Here are the main steps:

Choose a horizontal mounting surface. Drill the bracket base and secure it firmly to the boat using four non-magnetic screws. Ensure the screw size is appropriate to avoid damaging components beneath the mounting surface. Apply a sealant to seal the bracket to the boat, ensuring a perfect waterproof fit. Once installed, simply clip your Raymarine Micro Compass into the bracket for each navigation.

To mount the T004 deck bracket, you must use four non-magnetic screws. It is essential to select a screw size suitable for your vessel to avoid damaging components below the mounting surface.

Yes, once the T004 deck bracket is drilled and screwed to the boat, and the waterproofing process is completed, it becomes a permanent installation on the deck. The Raymarine Micro Compass can then be easily clipped and unclipped from this bracket.

For the compass to retain its accuracy, it must be mounted with a maximum tilt of 20° relative to the vertical. There must be no list to port or starboard. Compliance with this requirement is critical for reliable readings.

Yes, to avoid any magnetic interference that could affect the accuracy of your compass, the T004 bracket must not be installed less than 0.6 meters (2 feet) from magnetic objects. This also includes a conventional compass, which is itself a magnetic object.

The T004 deck bracket is a dedicated accessory and is specifically designed for the Raymarine Micro Compass. It provides an optimal fixed mounting solution for this compass model.

The T004 deck cleat package contains the T004 deck cleat itself. Mounting screws and sealant are not included and must be purchased separately.

The T004 deck bracket is designed to be mounted on a horizontal surface. It is essential to choose a stable and flat location on your boat's deck to ensure correct installation and compass accuracy.