Trecător de punte pentru conectoare până la Ø40 mm, cablu 12-15 mm - compozit negru

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors up to 40 mm in diameter.

This deck gland is specifically designed for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made from black composite, providing good resistance in marine environments while remaining lightweight.

For installing this bridge-mounted device, you will need the following tools:

A Pozidriv screwdriver
Sealing silicone
A 40 mm hole saw
A 2.5 mm or 3 mm drill bit (depending on the hardness of your mounting surface)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and drilling size. The DS40 is designed for connectors up to Ø40 mm and cables 12-15 mm, requiring a Ø40 mm hole. The DS30 is suitable for cables 9-14 mm and requires a Ø30 mm hole.

Four No. 6 x 16 self-tapping screws are included in the kit for securing the deck gland to your mount.

Yes, the application of silicone sealant is essential to ensure a perfect seal around the drilled hole and under the deck gland base, thus protecting the interior of your boat from water.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit. For hard materials (e.g., fiberglass, acrylic, hardwood): use a 3 mm (1/8 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK is a watertight deck gland, specifically designed to provide reliable water protection for cable penetrations through boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The M4x10 black bolt is a key component for assembling the deck gland, allowing the hull to be securely fastened to the base, ensuring the overall integrity of the assembly.

Yes, the Scanstrut DS40-P-BLK is a marine product specifically designed to withstand the demanding conditions of marine environments, thanks to its black composite construction.

To ensure optimal watertightness, it is essential to apply marine sealant around the drilled hole and under the deck gland base before securing it with the supplied screws. Ensure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK deck pass-through is shipped with detailed installation instructions to guide you step-by-step through the mounting process.

This deck gland is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, it would be more appropriate to consider a different Scanstrut model, such as the DS30, which is designed for cables of 9-14 mm, to ensure optimal sealing and compatibility.