Kit ROKK Mini - Suport tablete pentru montare pe șină

Yes, the ROKK Mini Kit is designed to be compatible with a wide range of rails. The rail mount (RLS-402) fits diameters from 19 to 34 mm (0.8 to 1.3 inches). The kit includes three spacers to cover the following ranges: 19-25 mm, 25-29 mm, and 29-34 mm. This allows installation on most cockpit rails, tiller bars, or handrails.

Yes, the ROKK Mini Scanstrut Kit is supplied with complete installation instructions. The provided documents include the assembly steps for the tablet clamp (RL-508) and for the rail mount (RLS-402). The instructions are illustrated and detail the attachment steps, the use of spacers, and the final tightening.

Absolutely. The ROKK Mini Kit is perfectly suited for installation on a tiller extension rail. Thanks to its spacer blocks, which cover diameters from 19 to 34 mm, it can be securely mounted on most standard tiller extension rails. This is an ideal solution to keep your tablet within easy reach at the helm.

Yes, the ROKK Mini Kit can usually accommodate a tablet with a protective case, provided the total thickness (tablet + case) does not exceed the clamp's opening capacity. The clamping vice (RL-508) can open to adapt to varying thicknesses. However, if the case is very thick or rigid, it may be necessary to remove it to ensure optimal and secure mounting.

The ROKK Mini Kit is designed for rails with a diameter between 19 and 34 mm. If your rail measures 18 mm, it is below the minimum compatibility range. It is not recommended to install the mount on an 18 mm rail, as the fastening would not be secure. For an 18 mm rail, you should consider another type of mount or use a specific adapter.

Yes, the ROKK Mini Kit is designed to be easily removable. Thanks to the Allen key fasteners, you can remove the tablet and the rail mount in a few minutes. This allows you to store the kit safely when not sailing or to move it to another rail if needed. The clamping system is quick and does not require specialized tools.

Yes, Scanstrut generally offers a warranty on its products. While the exact warranty duration may vary, Scanstrut is known for the quality of its marine mounts and often provides a 2 to 5-year warranty on its products. To check the exact warranty conditions applicable to your purchase, please consult Scanstrut’s official website or contact Sky Satellites System’s customer service.

Yes, the ROKK Mini Kit is perfectly suited for an iPad Mini. Its compact size and lightweight design make it an excellent choice for this device. The clamp can accommodate the iPad Mini with or without a thin case, and the rail mount will securely hold the setup on your boat's rail. This is a very popular solution among sailors using an iPad Mini as a navigation device.

Yes, the ROKK Mini Kit allows rotation of the tablet. The clamping vice (RL-508) is designed to pivot, enabling you to switch easily between landscape and portrait modes. This flexibility is ideal for using navigation apps in landscape mode or reading documents in portrait mode. Rotation is manual and locks into position via a friction system.

Yes, the ROKK Mini Kit is compatible with 34 mm diameter rails. The kit includes a spacer shim specifically designed for 29–34 mm rails. Use this shim to ensure a perfect fit and secure mounting on your 34 mm rail. Tighten the screws with the 3 mm Allen key to prevent any movement.

Yes, the ROKK Mini Kit is perfectly suited for a 1-inch (25.4 mm) rail. This diameter falls within the 25–29 mm spacer range included in the kit. Use this spacer for optimal mounting. The rail bracket (RLS-402) is designed to fit this common size on boats, making it an ideal choice for sailors.