Suport universal pentru tablete

The Scanstrut RL-508 universal tablet mount is designed to accommodate most tablets on the market. It supports devices with a width between 125 mm and 220 mm (approximately 4.92 to 8.66 inches). This includes compact models like the iPad mini, standard 9 to 10-inch tablets, as well as large professional tablets. The maximum supported load is 1.2 kg (2.65 lbs).

No, the Scanstrut RL-508 universal tablet mount is sold separately, without a mounting plate. It consists solely of the spring clamp that attaches to a compatible Scanstrut ROKK series mounting plate, such as the Mini Top Plate. You must purchase the mounting plate separately if you do not already own one.

The Scanstrut RL-508 mount can support a maximum load of 1.2 kg (2.65 lbs). This capacity is calculated considering use in a dynamic environment where accelerations up to 6 g may occur, such as on a boat in rough seas. This ensures your tablet remains securely held even under challenging conditions.

Yes, the Scanstrut RL-508 mount is specifically designed for marine use. It is part of the Scanstrut range, a brand recognized in the nautical sector. Its robust design allows it to withstand accelerations up to 6 g, making it reliable even in rough seas. The materials used are suitable for the salty and humid environment of boats.

Yes, you can generally use the Scanstrut RL-508 mount with a protective case, provided the total width of your tablet with its case does not exceed 220 mm and the total weight remains under 1.2 kg. The spring clamp adapts to different thicknesses thanks to its flexible design. However, for optimal safety, we recommend removing very thick or bulky cases.

The minimum tablet width accepted by the Scanstrut RL-508 mount is 125 mm (approximately 4.92 inches). This corresponds to compact tablets such as the iPad mini (approximately 134 mm wide) or very large smartphones. If your device is narrower, it will not be held securely by the clamp.

Yes, the Scanstrut RL-508 mount is compatible with Samsung Galaxy Tab tablets, provided their width is between 125 mm and 220 mm and their weight is less than 1.2 kg. For example, the Galaxy Tab S9 FE (approximately 165 mm wide) or the Galaxy Tab S8 Ultra (approximately 208 mm wide) are compatible. Check the dimensions of your specific model.

The Scanstrut RL-508 mount is designed for marine use and is splash- and moisture-resistant, but it is not fully watertight. Unlike the Scanstrut ROKK Tablet Mount, which includes a watertight enclosure for the tablet, the RL-508 is an open solution. Therefore, it is recommended not to expose it to prolonged direct water spray and to remove your tablet in heavy rain.

To clean the Scanstrut RL-508 mount, use a soft, damp cloth with mild soapy water. Avoid harsh chemicals, solvents, or abrasive cleaners that could damage the materials. After cleaning, thoroughly dry the mount with a clean cloth to prevent corrosion, especially in a marine environment. Regular maintenance will extend its lifespan.

Yes, the Scanstrut RL-508 mount can be used with a tablet placed in a waterproof case, provided the external dimensions of the case (width and weight) remain within the specified limits: width between 125 mm and 220 mm and weight under 1.2 kg. However, adding a case may make handling more difficult and reduce stability, so test the mounting before use.