SIMRAD Câble H2000 10m Fastnet - photo 2

SIMRAD Câble H2000 10m Fastnet - photo 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 21%

Simrad

135-0A-130

Cablu H2000 10m Fastnet

Câble H2000 10m Fastnet pour liaison de bus marine ou réseau instrument, adapté aux installations SIMRAD. Longueur indiquée : 10 m.

Prix publicBénéficier du tarif pro

31,38€

31,38€ ~~40,00€~~

TTC Expediere calculată la momentul plății.

Stoc redus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Segment cablu	Réseaux NMEA / bus marine
Tip cablu	Câble Fastnet
Compatibility Scope	Référence exacte de l’équipement à vérifier avant commande
Marcă compatibilă	Navico / Simrad / B&G
Environment	Installation nautique
Installation Advice	respecter la topologie du bus, les terminaisons et les alimentations prévues par le constructeur
Installation Check	le standard du bus, le genre des connecteurs et la longueur totale du backbone
Length	10 m
Length M	10
Protocol rețea	Fastnet
Product Usage	Réseau de bord
Skysat Usage	liaison de bus marine ou réseau instrument

Description détaillée

Cablu H2000 10m Fastnet este un cablu magistrală marin destinat conectării magistralei marine sau a rețelei de instrumente. Completează o instalare existentă sau înlocuiește un cablu uzat, păstrând o referință compatibilă cu electronica marină.

Fișa de produs este asociată familiei Rețele NMEA / magistrală marină. Lungime indicată: 10 m. Semnal sau protocol: Fastnet. Compatibilitatea trebuie confirmată cu echipamentul exact Navico / Simrad / B&G înainte de comandă.

Pentru o montare sigură, respectați topologia magistralei, terminările și alimentările prevăzute de constructor. Verificați, de asemenea, standardul magistralei, tipul conectoarelor și lungimea totală a magistralei principale înainte de a închide trecerile pentru cabluri.

Documentations

Type	Nom
	EN - Manuel d'utilisation - Câble H2000 10m Fastnet
	EN - Manuel d'utilisation - Câble H2000 10m Fastnet

Avis de l'expert

Pol CONIN

Responsabil digital

« Skysat Review - H2000 Cable 10m Fastnet »

Skysat tip: choose this cable based on the device to be connected, not just the available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through the mast, coachroof, or damp area, leave a service loop, protect the connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu H2000 10m Fastnet

31,38€

31,38€ ~~40,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the H2000 10m Fastnet cable used for?

H2000 10m Fastnet cable is used to provide the following function: marine bus or instrument network connection. It is intended for installations where you want to maintain a reference suited to the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact model of the Navico / Simrad / B&G device. Before ordering, verify the connector, pinout, and the documentation of the equipment to be connected.

What needs to be checked before installation?

Check the bus standard, connector type, and total backbone length. Also plan for the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

respect the bus topology, terminations, and power supplies specified by the manufacturer. Connectors must not be under tension, and exposed joints must be protected from moisture.

Is the indicated length always sufficient?

The indicated length is 10 m. Measure the actual passage inside the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM reference?

A manufacturer reference limits the risks of wiring errors, connector mismatches, or signal level issues. This is particularly important for SIMRAD connections, radar, antenna, marine bus, or data links.