Controler de încărcare SmartSolar MPPT 100/30

The ultra-fast MPPT (Maximum Power Point Tracking) technology enables the SmartSolar MPPT 100/30 charge controller to optimize solar energy harvesting. It is particularly effective when light intensity changes continuously, such as under cloudy skies or in case of partial shading.

An energy harvest improvement of up to 30% compared to PWM charge controllers. An improvement of up to 10% compared to slower MPPT charge controllers.Advanced maximum power point detection, even in the presence of multiple power points due to partial shading.

The SmartSolar MPPT 100/30 charge controller delivers maximum conversion efficiency exceeding 98 %. This high efficiency ensures optimal use of the solar energy captured by your panels.

No, the SmartSolar MPPT 100/30 charge controller does not require a cooling fan. Its design allows for efficient heat dissipation, enabling it to deliver maximum output current up to an ambient temperature of 40 °C without a fan.

The SmartSolar MPPT 100/30 controller integrates complete electronic protections to ensure system safety and durability. These include:

Overheat protection and power reduction in case of high temperature.Short-circuit protection for PV input.Reverse polarity protection for PV input.Reverse current protection for PV input.Output short-circuit protection.

The SmartSolar MPPT 100/30 controller is designed to operate within a temperature range of -30 °C to +60 °C. It can deliver its full rated power up to an ambient temperature of 40 °C.

The maximum nominal charging current that the SmartSolar MPPT 100/30 charge controller can supply to the battery is 30 amperes (30 A).

The SmartSolar MPPT 100/30 controller's own consumption is 30 mA for a 12 V battery system and 20 mA for a 24 V battery system.

The SmartSolar MPPT 100/30 controller features advanced maximum power point tracking that efficiently manages partial shading conditions. In cases of partial shading, multiple maximum power points can appear on the power-voltage curve. Victron Energy’s innovative algorithm ensures the controller always locks onto the optimal maximum power point, maximizing energy harvest.

Yes, the SmartSolar MPPT 100/30 controller has an internal temperature sensor. This sensor is used to compensate the absorption and float charge voltage based on the battery temperature, optimizing the charging process.

The dimensions of the SmartSolar MPPT 100/30 controller are 130 mm (height) x 186 mm (width) x 70 mm (depth). Its weight is 1.3 kg.

The SmartSolar MPPT 100/30 controller is compatible with 12 V and 24 V battery systems. It features automatic voltage selection.

The SmartSolar MPPT 100/30 controller is compatible with a wide range of battery types, including:

AGM batteriesGel batteriesFlooded lead-acid batteriesLithium batteries (LiFePO4)It also features a recovery function for fully discharged Li-ion batteries with built-in disconnect protection.

The SmartSolar MPPT 100/30 controller can handle a nominal solar panel power of up to:

440 W for a 12 V battery system. 880 W for a 24 V battery system. If a higher PV power is connected, the controller will limit the input power to these values.

The SmartSolar MPPT 100/30 controller can accept a maximum open-circuit voltage from solar panels of 100 V.

The SmartSolar MPPT 100/30 controller is designed to handle a maximum solar panel short-circuit current of 35 A. It is critical not to exceed this value, as a higher PV short-circuit current could damage the controller.

Yes, you can use an external sensor for battery voltage and temperature. The SmartSolar MPPT 100/30 controller can communicate with a Smart Battery Sense or a BMV-712 Smart Battery Monitor via Bluetooth (VE.Smart Networking) to retrieve this data, enabling more accurate charging.

The SmartSolar MPPT 100/30 controller offers several connectivity options:

Integrated Bluetooth Smart: Enables configuration, monitoring, and wireless updates via the VictronConnect app on smartphone or tablet.VE.Direct port: For wired connection to a Color Control GX, other GX products, a PC, or other devices, providing extended monitoring via the Victron Remote Management (VRM) portal if a GX device is used.

The SmartSolar MPPT 100/30 controller has an IP43 protection rating for electronic components and IP22 for the connection area. This means it is protected against solid objects larger than 1 mm and water splashes for electronic components, and against solid objects larger than 12.5 mm and dripping water for the connection area.

The SmartSolar MPPT 100/30 controller’s power terminals are rated for cables up to 16 mm² (AWG 6).

Yes, the SmartSolar MPPT 100/30 controller has a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It can also reconnect to a fully discharged Li-ion battery with an integrated disconnection function.