Convertor izolat Orion Tr 12/12-9A DC-DC

The Victron Energy Orion TR 12/12-9A converter is designed to provide a stable, isolated 12 V DC power supply from a 12 V power source. It is a power conditioning solution that ensures a constant output voltage even when input voltage varies.

This converter has an input voltage range of 8 to 17 V. Its nominal output voltage is 12.2 V, adjustable between 10 and 15 V.

The Orion Tr 12/12-9A converter provides a continuous output power of 110 W at an ambient temperature of 25 °C. At 40 °C, the continuous output power is 85 W.

Yes, the Victron Energy Orion Tr 12/12-9A output voltage is adjustable between 10 and 15 V, allowing it to be used as a 12 V battery charger for dedicated 12 V batteries.

The efficiency of this converter is 87%.

The operating temperature range for the Orion Tr 12/12-9A converter is -20 to 55 °C. It is important to note that a 3 % power reduction applies for every degree Celsius above 40 °C.

This converter has an IP20 protection rating. This means it is protected against solid objects larger than 12.5 mm but is not waterproof. It is therefore not water-resistant and must be installed in a dry environment.

Yes, this converter provides 200 V DC galvanic isolation between the input, output, and case. This isolation is essential for protecting sensitive equipment and preventing ground loops.

The compact dimensions of this converter are 100 x 113 x 47 mm (Height x Width x Depth). Its weight is approximately 0.42 kg.

The Orion Tr 12/12-9A converter is protected against output short circuits. It also includes a non-replaceable internal fuse for enhanced safety. Additionally, it complies with multiple safety, emission, and immunity standards, including EN 60950 and ECE R10-5.

The DC output current of this converter is 9 A at the nominal output voltage and at a temperature of 25 °C. The maximum output current (for 10 seconds) is 12.5 A.

The output noise of the voltage is 2 mV rms.

Yes, this converter can be connected in parallel. This allows the total output current to be increased for applications requiring more power, providing greater modularity for your installation.

The input voltage range for stable operation of the Orion Tr 12/12-9A is 8 to 17 V. If the output voltage is set to the nominal voltage or lower, it will remain stable within this range.

The Orion TR 12/12-9A converter is made by Victron Energy, a brand well-known in the marine sector. However, its IP20 rating means it is not waterproof. For marine use, it must be installed in a dry location, protected from humidity and water splashes.

The converter is installed using screw terminals, which simplifies wiring and ensures a secure connection.

Yes, the Orion Tr 12/12-9A inverter is equipped with a remote on/off function. This feature simplifies its integration into complex systems by allowing remote control, thus eliminating the need for a high-current switch directly on the device.

The Victron Energy Orion TR 12/12-9A converter is designed to be installed using screw terminals. Its compact dimensions (100 x 113 x 47 mm) make it easy to integrate into various spaces.

The output voltage of this converter is adjustable within a range from 10 V to 15 V.

The converter has a low-voltage disconnect threshold at 7 V. If the input voltage drops below this threshold, the converter will disconnect to protect the equipment. It will automatically reconnect when the input voltage reaches 7.5 V.