Convertor Orion-Tr 24/48-2,5A

This isolated DC-DC converter is designed to convert an input voltage of 24V DC into an output voltage of 48V DC. It is ideal for powering equipment requiring a 48V supply from a 24V system.

The Orion-Tr 24/48-2.5A converter delivers a continuous output power of 120 W at 25 °C. This power is reduced to 115 W at 40 °C due to high-temperature protection.

The converter accepts an input voltage range of 16 to 35 V DC. The undervoltage cutoff is at 14 V, and restart occurs at 15 V.

Yes, the nominal output voltage of 48.2 V is adjustable. You can manually adjust it via a potentiometer over a range from 40 to 60 V. To decrease the voltage, turn counterclockwise, and clockwise to increase it.

No, this Orion-Tr converter model is not designed for battery charging. For this application, it is recommended to use an Orion-Tr Smart model.

The 200 V DC galvanic isolation between the input, output, and housing is a key feature. It prevents ground loops and ensures the safety of sensitive equipment by electrically isolating the input and output circuits.

The continuous output current is 2.5 A at the nominal output voltage and at a temperature of 25 °C. The maximum output current (for 10 seconds) is 3.0 A.

The converter is equipped with screw terminals for DC connections. No specialized tool is required for cable installation.

Yes, the inverter has a remote on/off terminal. This allows the device to be controlled using a low-power switch or an engine contact, thus avoiding a high-current switch on the input wiring.

Yes, an unlimited number of units can be connected in parallel to increase the total output current. It is important to always adjust the output voltage before connecting the converters in parallel.

The converter is protected against high temperatures. The output current will be automatically reduced when the ambient temperature exceeds 40 °C (3 % derating per °C above 40 °C) to ensure the device's longevity.

The Orion-Tr 24/48-2.5A converter has an efficiency of 88%.

Models with a 12 V and 24 V input, like this one, have a non-replaceable internal input fuse. Models with a 48 V input require an external fuse.

The converter dimensions are 100 x 113 x 47 mm (height x width x depth). Its weight is 0.42 kg.

The converter has IP43 protection. This protection is effective when the screw terminals are oriented downward during installation.

It is recommended to choose a cool, dry and well-ventilated location for installing the converter to ensure proper operation and longevity.

The no-load input current (when the inverter generates an output voltage with no load applied) is less than 120 mA.

Current consumption is less than 200 µA when the converter is disabled via its remote port.

The screw terminals of the converter can accept a maximum cable cross-section of 6 mm² (AWG10).

Yes, all Orion-Tr models are protected against short circuits at the output, ensuring the safety of the device and connected equipment.