Přesazený konektor svorky - šrouby 5/16"-18 (červený)

The BLUE SEA 2202-BSS watertight bulkhead connector is designed to allow safe passage of high-current cables through bulkheads, firewalls, hulls, and decks. It provides a robust solution to protect cables from abrasion and ensure strain relief, preventing premature wear and short-circuit risks.

This connector is equipped with 5/16"-18 UNC (Unified National Coarse) studs at two locations, designed for reliable connections.

The BLUE SEA 2202-BSS connector can handle a maximum current of 250 amperes (A).

The maximum operating voltage for this connector is 48 volts DC (direct current).

Yes, this connector is designed to be waterproof. Its design includes a mounting face that allows for a gasket or sealing to ensure a watertight installation, compliant with IP66 standards. This standard provides protection against dust and powerful water jets, including those from rough seas.

The base material of the connector is reinforced thermoplastic (Zytel PA66 FR50NC010), which insulates the stud from the bulkhead. The studs are made of tinned copper alloy, providing superior corrosion resistance and high conductivity.

The connector ensures a reliable connection thanks to the use of serrated flange nuts. These nuts provide robust and secure connections, essential for managing high-power electrical circuits onboard.

This specific BLUE SEA through-hull connector model is red in color.

Unlike simple cable glands, the 2202-BSS connector provides a robust and secure connection for high-current cables. It features connection studs and serrated flange nuts for reliable terminations, while also offering abrasion protection and strain relief, which a standard cable gland does not provide.

Yes, the base material of the connector is made of reinforced thermoplastic, which insulates the stud from the bulkhead on which it is mounted.

The tin-plated copper alloy studs provide superior corrosion resistance, which is critical in marine environments, and high electrical conductivity for optimal performance.

This connector is ideally suited for applications requiring reliable power distribution on board vessels, particularly for high-power electrical circuits where connection robustness and safety are critical.

Installation involves drilling holes for mounting studs and screws into the bulkhead, firewall, or deck. The connector's mounting face is designed to allow application of a sealant or caulking to ensure IP66-rated waterproofing. Cables are then connected to the studs using serrated flange nuts.

The connector requires clearance for #10 or M5 type screws for mounting. The technical drawing specifies a clearance of 0.21 inches (5.2 mm) for these screws.

To ensure waterproofing, the mounting face of the connector is designed to be used with an appropriate gasket or sealant during installation. This ensures compliance with IP66, protecting against dust and powerful water jets.

The connector is designed to be mounted on bulkheads, firewalls, hulls, and decks, allowing safe cable routing through these surfaces in a marine environment.

Yes, the dimensional drawing shows a spacing between the centers of the mounting holes. The horizontal spacing is 2.00 inches (50.8 mm) and the vertical spacing is 1.31 inches (33.3 mm) between the centers of the mounting holes.

This connector is compatible with cables whose terminals match the 5/16"-18 stud size. It is specifically designed for high-current cables requiring a robust and secure connection.

Yes, this connector is specifically designed for marine environments. Its corrosion-resistant materials (tinned copper studs, reinforced thermoplastic base) and compliance with IP66 standard make it ideal for nautical applications, including those exposed to salt spray and powerful water jets.

The BLUE SEA 2202-BSS connector is rated for a maximum voltage of 48V DC. It is not recommended for AC (alternating current) applications unless the AC voltage and current specifications are clearly defined and below the DC ratings, which is not the case here.