Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 17%

Blue Sea Systems

7504-BSS

Stmívač Deckhand – 24 V DC 6 A

Q: What is the Deckhand 7504-BSS inverter from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the brightness of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LED lights, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current this variable frequency drive can handle?

The maximum output current the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the illuminated output with delay function?

To activate the illuminated output function:For a 1-minute delay: Hold the switch in the upper (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute. For a 2 to 5-minute delay: Hold the switch in the upper (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Q: Does the dimmer retain the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this drive?

The drive is designed to operate within a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Napětí: 24 V

12 V 24 V

Proud: 6 A

6 A 12 A

Prix publicBénéficier du tarif pro

2.551,11 CZK

2.551,11 CZK ~~3.100,41 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ řídicího rozhraní	Interrupteur momentané (ON)-OFF-(ON)
Typ řízení	Modulation de largeur d'impulsion (PWM)
Kompatibilní osvětlovací systémy	LED non régulées, incandescentes, halogènes
Zone Control	Non
Rozsah provozního napětí	18 à 32
Typická spotřeba elektrické energie	<0.048
Typ instalace	Montage sur panneau
Rozměry produktu	82.55 x 88.9 x 50.8 mm
Kompatibilní s stmíváním	Oui
Obsah balení	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Čárový kód produktu	SK-000051475
Certifikace	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Maximální výstupní proud	6 A
Jmenovité napětí	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Rozsah provozní teploty	−40°C à 85°C
SKU výrobku	7504-BSS
Typ výrobku	Variateur d'intensité

Description détaillée

Stmívač Deckhand 7504-BSS od společnosti BLUE SEA je digitální řešení pro regulaci intenzity osvětlení v 24V DC systémech na palubě. Umožňuje ovládat neregulovaná LED, žárovky a halogenové světlomety. Funkce osvětleného výstupu poskytuje nastavitelnou prodlevu (1 až 5 minut) pro bezpečnost při nástupu a výstupu z lodi. Stmívač podporuje více umístění spínačů a pamatuje si poslední nastavení intenzity.

Funkce a vlastnosti

Vestavěný "bulb saver" prodlužuje životnost žárovek při nabíjení baterií lodi. Posunuté montážní jazýčky umožňují instalaci více stmívačů vedle sebe, čímž šetří místo v rozvodné desce. Vestavěná ochrana proti přetížení zajišťuje bezpečnost obvodu, přičemž systém lze resetovat podržením spínače stmívače, dokud obvod nezabliká.

Technické parametry a shoda

Stmívač Deckhand 7504 pracuje při jmenovitém napětí 24 V DC v rozsahu 18 V až 32 V a poskytuje maximální výstupní proud 6 A. Spotřeba v klidovém režimu je nižší než 2 mA a pracuje v širokém teplotním rozsahu od −40°C do 85°C. Regulace jasu probíhá pomocí pulzně-šířkové modulace (PWM), což zaručuje plynulé stmívání. Výrobek splňuje normy E, ISO 8846 a SAE J1171 pro ochranu proti vnějšímu vznícení, což potvrzuje jeho spolehlivost v námořním prostředí.

Umístění v produktové řadě BLUE SEA

V produktové řadě Deckhand společnosti BLUE SEA představuje model 7504 referenci pro 24V DC systémy s proudem 6 A. Doplňuje 12V DC varianty, jako jsou 7506 (6 A), 7507 (12 A) a 7508 (25 A), stejně jako další 24V DC modely s vyšším výkonem, např. 7509 (12 A). Tento stmívač je určen k nahrazení starších modelů, jako jsou 7501 nebo 7502, a nabízí vylepšené parametry proudu a funkcí pro 24V systémy.

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Stmívač Deckhand – 24 V DC 6 A

2.551,11 CZK

2.551,11 CZK ~~3.100,41 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Deckhand 7504-BSS inverter from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the brightness of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LED lights, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current this variable frequency drive can handle?

The maximum output current the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the illuminated output with delay function?

To activate the illuminated output function:

For a 1-minute delay: Hold the switch in the upper (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.
For a 2 to 5-minute delay: Hold the switch in the upper (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Does the dimmer retain the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

What is the operating temperature range of this drive?

The drive is designed to operate within a wide temperature range, from -40°C to 85°C.

What is the energy consumption of the autopilot in standby (parasitic) mode?

The maximum parasitic consumption of the Deckhand drive is less than 2 mA.

Is it possible to use this variable frequency drive with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points on board.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, thus optimizing the available space on the electrical panel.

What type of switch is included with the Deckhand 7504-BSS dimmer?

The autopilot drive is supplied with a momentary switch (ON)-OFF-(ON) (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer is connected as follows:

The red wire connects to the +24V DC power supply.The two black wires connect to ground (negative bus bar).The blue wire connects to the lamp.The gray and white wires are the inputs for the switch (Down Input and Up Input).A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS drive?

The Deckhand 7504-BSS drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this variable speed drive is marked E and complies with external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer for LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or the lights.