HUB Ethernet 8 portů

The Furuno 8-port Ethernet HUB, also known as model HUB-101, is an unmanaged network switch designed to centralize Ethernet connectivity on vessels. It enables rapid data distribution between multifunction displays, radar antennas, and compatible fishfinder modules within the Furuno NavNet 3D and TZtouch/TZtouch2 navigation systems.

This hub is equipped with eight Ethernet ports.

The HUB-101 supports Ethernet connection speeds of 10BASE-T and 100BASE-TX, which complies with the Fast Ethernet standard.

The Furuno 8-port Ethernet HUB is an unmanaged switch. This means it requires no software configuration to operate, providing a plug-and-play solution.

The HUB-101 features LED indicators that display the general power status of the device as well as the connection and activity status of each network port, enabling quick diagnostics.

The weight of this hub is 2 kilograms.

No, the HUB-101 is not waterproof. It must be installed in a dry location, protected from direct water spray and intense sunlight to ensure proper operation and durability.

This hub is specifically designed to be compatible with Furuno NavNet 3D and NavNet TZtouch/TZtouch2 navigation systems.

Although the hub is optimized for integration with Furuno NavNet marine systems, it is a standard 10/100BASE-TX Ethernet switch. It can therefore technically connect other devices compatible with this Ethernet standard, but specific features such as Power Sync are exclusive to compatible Furuno equipment.

No, the HUB-101 is generally not recommended for Furuno NavNet TZtouch3 systems. These newer systems often require Gigabit Ethernet hubs (such as Furuno HUB-104 or HUB-105 models) for optimal network performance due to their higher bandwidth requirements.

The HUB-101 only supports 10BASE-T and 100BASE-TX speeds. It can be connected to a Gigabit Ethernet network, but all devices connected via this hub will be limited to a maximum speed of 100 Mbps.

Yes, the HUB-101 is suitable for connecting radar antennas compatible with Furuno NavNet 3D and TZtouch/TZtouch2 systems, enabling radar data distribution across the onboard network.

Yes, you can connect a PC to this hub via a standard Ethernet cable, provided the PC is configured for a 10/100BASE-TX network. However, the hub is primarily designed for integration with Furuno marine electronic systems.

The Furuno 8-port Ethernet HUB requires a 12 or 24 Vdc power supply, making it compatible with most onboard electrical systems on vessels.

The HUB-101 can be mounted on a desk or bulkhead. It must be installed in a dry location, protected from direct sunlight and water spray to ensure its longevity and proper operation.

Yes, it is entirely possible to install multiple HUB-101 units in series on the same local network (LAN) to increase the total number of Ethernet ports available and thus connect more devices.

The Power Sync RJ45 function is a feature of the HUB-101 that synchronizes the power supply to connected NavNet 3D display units. This simplifies the management of powering on and off the entire NavNet 3D system.

To connect devices to the HUB-101, you must use standard Ethernet cables (e.g., Cat5e or Cat6) equipped with RJ45 connectors.

Yes, this product is covered by Furuno’s standard manufacturer warranty. For warranty terms and conditions, refer to the documentation supplied with the product or contact customer service.

The country of origin and manufacture of this Furuno product is Japan.