ECLIPSE CL30, Courtesy Light, Blue - Garmin image 1

ECLIPSE CL30, Courtesy Light, Blue - Garmin image 2

ECLIPSE CL30, Courtesy Light, Blue - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Garmin

010-04468-00

ECLIPSE CL30, modré osvětlení pro pohodlí

Le feu de courtoisie GARMIN ECLIPSE CL30 bleu est une solution LED compacte (diamètre 33mm, profondeur 18mm) pour éclairage d'appoint sur bateaux 12V DC. Entièrement scellé pour installation intérieure ou extérieure en zones humides, il consomme 0,08A et peut être contrôlé par un simple interrupteur. Contrairement aux versions RGB nécessitant un Command Center, ce modèle bleu offre une simplicité d'intégration. Livré avec sa visserie de montage.

Prix publicBénéficier du tarif pro

984,73 CZK

984,73 CZK ~~1.119,76 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Provozní napětí	10-15V DC
Typická spotřeba elektrické energie	0.5-1W
Barva světla	Bleu
Typ instalace	Encastré
Průměr instalačního výřezu	23.0
Vnější průměr	33.0
Stupeň krytí IP	IPX7
Tloušťka lunety	3.66
Body Diameter Behind Bezel Mm	22.5
Control Method Primary	Interrupteur Marche/Arrêt
Depth Behind Bezel Mm	26.5
Dimming Functionality	Oui
Max Lights Per Controller	32
Hloubka zapuštění	18
Nominal Operating Voltage	12V DC
Power Consumption Typical 12v A	0.08
Reset Function Description	Éteindre pendant 2 secondes pour réinitialiser à pleine puissance

Description détaillée

Určený pro doplňkové a pohodlné osvětlení na palubě plavidel, GARMIN ECLIPSE CL30 je kompaktní LED světlo pro pohodlí v modré barvě. Ideální pro oblasti vyžadující diskrétní osvětlení, jako jsou lávky, schody, kormidelna nebo technické prostory, tento svítidlo je určeno pro instalace 12V DC (rozsah provozního napětí 10 až 15V DC).

Konstrukce a technické specifikace

Světlo pro pohodlí ECLIPSE CL30 se vyznačuje zcela uzavřenou konstrukcí, která zajišťuje odolnost proti vlhkému prostředí a možnost instalace jak uvnitř, tak vně lodi. Spotřeba elektrické energie se pohybuje kolem 0,5 až 1W na světlo, s typickým proudem 0,08A při 12V. Jeho kompaktní rozměry (průměr čelní části 33mm, hloubka instalace 18mm a průměr otvoru pro vložení 23mm) umožňují diskrétní vestavbu do rovných povrchů.

Možnosti ovládání a umístění v řadě ECLIPSE

Modré světlo GARMIN ECLIPSE CL30 nabízí flexibilitu ovládání pomocí jednoduchého spínače zapnuto/vypnuto, který umožňuje i stmívání přepnutím. Lze jej také integrovat a ovládat prostřednictvím ovládacího centra ECLIPSE pro složitější instalace. Tato jednotná verze se liší od modelů dvoubarevných (modré a bílé) a RGB z řady ECLIPSE, které vyžadují pro plnou funkčnost specificky ovládací centrum ECLIPSE. CL30 v modré barvě tak představuje přímé a účinné řešení pro specifické potřeby, bez složitosti systémů s více barvami a centralizovaným řízením.

Documentations

Type	Nom
	Installation Guide - ECLIPSE CL30 Courtesy Light Blue

Avis de l'expert

« Garmin ECLIPSE CL30 courtesy lighting: simple 12V waterproof solution »

The Garmin ECLIPSE CL30 courtesy light, in its blue version, is a relevant supplementary lighting solution for owners of pleasure craft with a 12V electrical system. It is particularly well-suited for marking passageways, stair treads, or creating subtle ambient lighting in cockpits or cabins. Its flush-mounted design and compact footprint (23mm hole diameter) facilitate its aesthetic integration in various marine environments.

Installation is simplified by a two-wire wiring system, making it accessible even for secondary installations or additions. The ability to control it with a simple on/off switch, including dimming functionality, is an advantage for systems where a dedicated control center is not required or desired. This positions it as a direct and economical alternative to RGB versions in the same ECLIPSE range, which require the Command Center for operation.

Note: although the CL30 is designed for damp environments and is sealed, it is not intended for permanent submersion. Applying a clear marine-grade sealant during installation is essential to ensure its durability. This luminaire is ideal for boats seeking a functional and discreet lighting solution without the complexity of a multi-color system.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE CL30, modré osvětlení pro pohodlí

984,73 CZK

984,73 CZK ~~1.119,76 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of the light emitted by the GARMIN ECLIPSE CL30?

The GARMIN ECLIPSE CL30 courtesy light emits a blue light. It is designed to provide discreet and effective supplementary lighting aboard your vessel.

What is the Garmin Eclipse CL30 courtesy light used for?

The GARMIN ECLIPSE CL30 is a compact LED courtesy light designed for supplementary lighting on board vessels. It is ideal for discreetly illuminating areas such as side decks, stairs, helm stations, or technical compartments, thereby enhancing safety and aesthetics.

Can the GARMIN ECLIPSE CL30 be installed outdoors on a boat?

Yes, the GARMIN ECLIPSE CL30 courtesy light is designed with a fully sealed construction, giving it resistance to humid environments. It can be installed both inside and outside the boat, including in areas prone to moisture, but it is not designed for continuous immersion in water.

What are the dimensions of the GARMIN ECLIPSE CL30 courtesy light?

The GARMIN ECLIPSE CL30 has compact dimensions for discreet integration. Its front diameter is 33 mm and its maximum installation depth is 18 mm. The recommended drilling diameter for flush mounting is 23 mm.

What is the power consumption of the GARMIN ECLIPSE CL30?

The typical power consumption of the GARMIN ECLIPSE CL30 is very low, around 0.5 to 1 Watt per light. Its typical current draw is 0.08 Amperes at 12 Volts, making it an energy-efficient lighting solution for your boat.

What type of surface is required for installing the GARMIN ECLIPSE CL30?

For correct and safe installation, the GARMIN ECLIPSE CL30 courtesy light must be mounted on a flat, non-curved surface. This ensures proper grip and optimal integration of the fixture.

Is a sealing product required when installing the GARMIN ECLIPSE CL30?

Yes, it is recommended to use a clear marine sealant during installation. Apply it between the lens and the mounting surface, as well as between the hex nut and the back of the mounting surface. Excess sealant must be cleaned with a soft cloth, soap, and water. Do not use chemical cleaners.

What electrical precautions should be taken before installing the GARMIN ECLIPSE CL30?

Before proceeding with the installation, it is essential to ensure that the vessel's power source and battery are disconnected or isolated to prevent any electrical risk. It is also strongly recommended that a qualified professional carry out the electrical and mechanical installation.

What is the recommended drilling diameter for embedding the GARMIN ECLIPSE CL30?

The recommended hole diameter for embedding the GARMIN ECLIPSE CL30 is 23 mm (0.90 inch). It is advised to drill a slightly smaller hole and adjust it with a file to ensure a precise and secure fit.

How to connect the GARMIN ECLIPSE CL30 to a 12V DC power supply?

For an installation with a simple on/off switch, the red wire of the GARMIN ECLIPSE CL30 must be connected to a 10.5–15 V DC power source, and the black wire to ground (GND). It is critical to use a properly sized cable to ensure voltage drop remains below 3% at the end of the light chain.

Is the GARMIN ECLIPSE CL30 compatible with all boat electrical systems?

The GARMIN ECLIPSE CL30 is specifically designed to operate only with 12V DC electrical systems on boats. It can operate within a voltage range of 10 to 15V DC. It must never be connected to voltages outside this range or directly to AC power.

Can I control the GARMIN ECLIPSE CL30 with a third-party dimmer?

No, the GARMIN ECLIPSE CL30 is not designed to be connected to third-party lighting control products or dimmers. It must be used with a simple on/off switch or, for more complex installations, with the ECLIPSE control center.

Can the GARMIN ECLIPSE CL30 be integrated into a centralized control system?

Yes, the GARMIN ECLIPSE CL30 can be integrated and managed via the Garmin ECLIPSE control head for more complex installations, providing advanced control flexibility.

How many GARMIN ECLIPSE CL30 lights can be connected to an ECLIPSE control unit?

Up to 32 GARMIN ECLIPSE CL30 lights can be connected per output zone of an ECLIPSE control center, enabling efficient lighting management for large installations.

How does the dimming function work with a simple on/off switch for the GARMIN ECLIPSE CL30?

For single-color lights such as the GARMIN ECLIPSE CL30, you can toggle the power switch to adjust the brightness (dimming). Toggle it again to pause the dimming. To reset the light to full power, simply turn off the switch for 2 seconds.

Is the GARMIN ECLIPSE CL30 submersible?

No, although the GARMIN ECLIPSE CL30 is fully sealed and designed for installation in wet areas, it is not intended for continuous immersion in water. It resists splashes and moisture, but not prolonged submersion.

Is it necessary to hire a professional to install the GARMIN ECLIPSE CL30?

It is strongly recommended that a qualified professional perform the electrical and mechanical installation of the GARMIN ECLIPSE CL30. This ensures correct, safe installation in compliance with standards, optimizing the product's performance and durability.

What is the operating voltage range of the GARMIN ECLIPSE CL30?

The GARMIN ECLIPSE CL30 is designed to operate on a 12V DC power supply. Its operating voltage range is specifically 10 to 15 Volts DC, ensuring stable performance within this range.

Is the cable gauge important when installing the GARMIN ECLIPSE CL30?

Yes, the cable gauge is very important. It is essential to use a suitable gauge cable for the installation of the GARMIN ECLIPSE CL30 to ensure a voltage drop of less than 3% up to the last light in the chain. This ensures consistent brightness and prevents performance issues.