ECLIPSE CL30, Courtesy Light, Blue and White - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Garmin

010-04470-00

ECLIPSE CL30, osvětlení zdvořilostní modré a bílé

L'éclairage de courtoisie Garmin ECLIPSE CL30 bleu et blanc est une solution LED compacte et étanche (IP68) conçue pour les bateaux 12 V. Il offre un éclairage bicolore contrôlable par interrupteur ou via l'ECLIPSE Command Center pour une intégration avancée. Ce produit est livré seul.

Prix publicBénéficier du tarif pro

1.191,10 CZK

1.191,10 CZK ~~1.368,84 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Provozní napětí	12 V (10-15 V CC)
Barva světla	Bleu et Blanc
Teplota barvy	5000.0
Typ instalace	Encastré
Průměr instalačního výřezu	23.0
Vnější průměr	33.0
Hlavní materiál tělesa	Acrylique
Stupeň krytí IP	IP68
Tloušťka lunety	3.66
Body Material Finish	Chromée
Light Body Diameter Mm	26.5
Min Operating Voltage Dc	10
Hloubka zapuštění	18
Operating Voltage Max Dc	15
Power Consumption Max Current A	0.1
Maximální spotřeba elektrické energie	1.2
Power Consumption Typical 12v A	0.08

Description détaillée

Navržen pro námořní prostředí, osvětlení zdvořilostní ECLIPSE CL30 od Garminu v modré a bílé variantě je kompaktní a diskrétní LED řešení. Určeno k osvětlení chodeb, schodů, kormidelních stanovišť a architektonických detailů na lodích, instaluje se zapuštěním. Tento model je vybaven 3 modrými a 3 bílými LED diodami o výkonu 0,5 W každá, poskytujícími namodralé nebo bílé světlo (5000 K) s extrémně širokým úhlem svazku.

Integrace a technické parametry

ECLIPSE CL30 je specificky navržen pro palubní systémy 12 V, přičemž pracuje v napěťovém rozsahu 10 až 15 V DC. Průměrná spotřeba je 1,2 W, s maximálním proudem 0,1 A při 12 V. Tělo světla je vyrobeno z průhledného akrylu s chromovaným povrchem a možností doplnění o ozdobný kroužek z nerezové oceli. Je zcela vodotěsné s klasifikací IP68, což zaručuje odolnost proti prachu a dočasnému ponoření, nikoli však trvalému ponoření pod vodu.

Instalace a ovládání

Instalace ECLIPSE CL30 je zjednodušena díky dvouvodičovému zapojení. Musí být namontován na rovný povrch, přičemž vyžaduje otvor o průměru 25,4 mm (1 palec) pro zapuštění. Přední průměr včetně ozdobného kroužku činí 33 mm. Ovládání barev (modrá nebo bílá) se provádí jednoduchým vypínačem zapnuto/vypnuto: přepínačem se změní barva a vypnutí na 2 sekundy resetuje osvětlení do bílé barvy. Pro pokročilejší ovládání, včetně dynamických efektů jako stroboskop nebo barevné cykly, lze CL30 integrovat do volitelného systému ECLIPSE Command Center od Lumishore®, kompatibilního s multifunkčními displeji (MFD) nebo chytrými zařízeními. Na rozdíl od RGB verzí řady CL30 nabízí tento model modro-bílá flexibilitu ovládání bez nutnosti používat Command Center.

Documentations

Type	Nom
	Installation Guide - ECLIPSE CL30 Courtesy Light Blue/White

Avis de l'expert

« Garmin ECLIPSE CL30 courtesy lighting: 12V versatility »

The Garmin ECLIPSE CL30 courtesy lighting is a relevant choice for integrating discreet and functional lighting points aboard. Its dual-color design (blue and white) makes it versatile for creating different ambiances or for safety lighting in passageways. This model is particularly suited to small to medium-sized pleasure craft (up to 15–20 meters) where a complex lighting system is not always required, but where reliability and discretion are valued.

Installation is relatively straightforward thanks to its two-wire wiring and compact design. Drilling a 25.4 mm hole for flush mounting is standard, but it is crucial to use transparent marine sealant between the lens and the mounting surface, as well as between the hex nut and the back of the surface, to ensure long-term waterproofing. Its exclusive compatibility with 12 V DC systems between 10 and 15 V must be strictly observed to avoid damage. Unlike RGB versions that require the Command Center to function, the CL30 blue and white can be controlled by a simple switch, offering an economical and easy-to-implement solution for color changes. However, for extended lighting systems or synchronized lighting effects, integration with the Command Center unlocks the full potential of the ECLIPSE ecosystem.

It is important to note that, despite its IP68 rating, this fixture is not designed for permanent submersion. It is ideal for damp areas such as cockpits or bathrooms, but should not be used as underwater lighting. For optimal durability, adequate sizing of the power cable is recommended to limit voltage drop to less than 3% across the lighting circuit, especially if multiple units are installed in series.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE CL30, osvětlení zdvořilostní modré a bílé

1.191,10 CZK

1.191,10 CZK ~~1.368,84 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE CL30 courtesy lighting?

The Garmin ECLIPSE CL30 is a compact and discreet LED lighting solution designed specifically for marine environments. It is intended to illuminate walkways, stairs, helms, and architectural details on boats, integrating via flush mounting.

Which lighting colors are available for the ECLIPSE CL30 model?

The ECLIPSE CL30 model is a two-colour light, providing a blue light and a white light. It is equipped with 3 blue LEDs and 3 white LEDs.

What is the luminous intensity of the ECLIPSE CL30?

Each LED in the ECLIPSE CL30 has a power output of 0.5 W. The lighting is equipped with 3 blue LEDs and 3 white LEDs.

What is the beam angle of the ECLIPSE CL30 lighting?

The ECLIPSE CL30 lighting is designed to provide an ultra-wide beam angle, ensuring extended illumination of targeted areas.

What is the IPX waterproof rating of the ECLIPSE CL30?

The ECLIPSE CL30 has an IP68 rating, meaning it is fully dustproof and resistant to temporary immersion. It is not designed for permanent submersion.

What materials is the ECLIPSE CL30 lighting housing made of?

The ECLIPSE CL30 lighting body is made of transparent acrylic with a chrome finish. A stainless steel trim ring can be added as an option.

What is the color temperature of the white light from the ECLIPSE CL30?

The white light emitted by the ECLIPSE CL30 has a color temperature of 5000 K, providing pure white illumination.

What is the required supply voltage for the ECLIPSE CL30?

The ECLIPSE CL30 is specifically designed for 12 V marine systems and operates within a voltage range of 10 to 15 V DC.

Can the ECLIPSE CL30 be connected to a 24V or AC system?

No, the ECLIPSE CL30 lighting is designed to operate only with boats equipped with 12V DC systems. It must not be connected to voltages outside the 10-15V DC range nor directly to an AC voltage.

Is the ECLIPSE CL30 compatible with third-party dimmers or controllers?

No, the ECLIPSE CL30 lighting is designed to be used with a simple on/off switch or with the ECLIPSE Command Center control unit. It must not be connected to third-party lighting control products or dimmers.

How to install the courtesy lighting ECLIPSE CL30?

The ECLIPSE CL30 must be mounted on a flat, non-curved surface. Installation is done by recessing, requiring a cutout hole. Wiring is done via 2 wires.

Should the boat's power supply be disconnected before installation?

Yes, it is imperative to always ensure that the boat's power source and battery are disconnected or isolated before proceeding with the installation.

Is a professional recommended for installing the ECLIPSE CL30?

Yes, a qualified professional should perform the electrical and mechanical installation of the lighting.

What type of wiring is required for the ECLIPSE CL30?

Installing the ECLIPSE CL30 is simplified by a 2-wire wiring. It is important to use a properly gauged cable to ensure a voltage drop of less than 3% at the end of the lighting chain.

Should a sealing product be used during installation?

Yes, a clear marine sealant must be used between the lens and the mounting surface, as well as between the hex nut and the back of the mounting surface to ensure optimal watertightness.

What is the warranty duration for the ECLIPSE CL30 lighting?

The ECLIPSE CL30 lighting fixture comes with a three-year warranty from the original purchase date, covering manufacturing defects.

What conditions void the warranty of the ECLIPSE CL30?

The warranty of the ECLIPSE CL30 may be voided in the following cases:

Improper use or abuse. Incorrect or negligent installation. Inappropriate shipping. Damage caused by disasters (fire, flood, storm, lightning). Installation by unqualified personnel. Unauthorized repair or modification. Unapproved installations. Failure to comply with installation, maintenance, and use instructions provided in the documentation.

What is the lighting color of model 010-04470-00?

This reference corresponds to the blue and white version of the Garmin ECLIPSE CL30 courtesy lighting. It is intended for installations where a blue ambient light and a functional white light are desired.

What hole size should be drilled to install the ECLIPSE CL30?

Nexus technical data specifies a cut-out diameter of 23 mm, with an outer diameter of 33 mm. Always check the mounting template and the manual before drilling, as the chosen location must also allow for cable routing and sealing.

Is the ECLIPSE CL30 suitable for installation in a spray-prone environment?

Yes, the ECLIPSE CL30 is listed with an IP68 rating in Nexus. Installation must however comply with the Garmin manual: power must be cut, cable pass-through must be protected, correct tightening and sealing of the mounting area.