ECLIPSE DL55, Downlight, White + RGB (Black Finish) - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 9%

Garmin

010-04541-00

ECLIPSE DL55, stropní svítidlo bílé + RGB, černá povrchová úprava

Le downlight Garmin ECLIPSE DL55 offre un éclairage marin polyvalent avec des LED blanches (5000 K) et RGB, adapté aux installations intérieures et extérieures grâce à son indice IP68. Conçu pour les systèmes 12 V, il se contrôle via un interrupteur simple ou un ECLIPSE Command Center pour une gestion avancée. Inclus : ressorts de fixation pour installation intérieure.

Prix publicBénéficier du tarif pro

3.388,30 CZK

3.388,30 CZK ~~3.740,48 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Provozní napětí	12
Typická spotřeba elektrické energie	4 W
Teplota barvy	5000.0
Průměr instalačního výřezu	50.8
Hloubka zapuštění	21.2
Vnější průměr	64.0
Výška	3.5
Hlavní materiál tělesa	Aluminium
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Body Diameter Rear Mm	37.0
Color Modes	Blanc, Cycle RGB, Pause couleur
Control Compatibility	Interrupteur On/Off, ECLIPSE Command Center
Doporučený jmenovitý proud pojistky	Approprié
Požadovaná pojistka	Oui
Typ instalace	Encastré
Max Power Consumption Current A	0.4
Max Voltage Drop Percent	3
Operating Voltage Range Vdc	10-15
Typ výrobku	Downlight
Total Height Mm	51.5
Typical Current Draw A	0.33

Description détaillée

Downlight Garmin ECLIPSE DL55 s černým povrchem je všestranné LED osvětlení navržené pro vnitřní i venkovní aplikace na moři. Toto svítidlo kombinuje bílý světelný zdroj (5000 K) a plný RGB barevný spektra, což umožňuje flexibilní osvětlení paluby. Robustní konstrukce a stupeň krytí IP68 zajišťují odolnost vůči náročným námořním podmínkám, takže jej lze instalovat i do vlhkých prostor bez rizika trvalého ponoření.

Konstrukce a technické parametry

DL55 je vybaven čtyřmi 3W LED (po jedné pro červenou, zelenou, modrou a bílou barvu), které poskytují průměrný světelný výkon 4,8 W při maximální spotřebě proudu 0,4 A při 12 V. Je navržen pro napájení z 12V elektrických systémů lodí s provozním napětím v rozmezí 10–15 V DC. Hloubka zapuštění pouhých 21,2 mm a průměr otvoru 50,8 mm usnadňují instalaci i do omezených prostor. Konstrukce zahrnuje odolné tělo z hliníku s povrchovou úpravou eloxací a práškovým lakováním, a skleněnou čelní plochu, která zaručuje odolnost vůči mořskému prostředí.

Možnosti ovládání a univerzálnost instalace

Downlight ECLIPSE DL55 lze ovládat pomocí jednoduchého spínače zapnuto/vypnuto, který umožňuje aktivovat bílé světlo nebo procházet barevným spektrem. Pro pokročilejší řízení je kompatibilní s ECLIPSE Command Center (prodáváno samostatně), které umožňuje ovládání prostřednictvím kompatibilních multifunkčních displejů (MFD), chytrých zařízení nebo okamžitého spínače. Pro mechanickou instalaci jsou součástí balení pružinové spony z nerezové oceli pro vnitřní montáže. Pro venkovní aplikace nebo vlhké prostory se doporučuje upevnit svítidlo pomocí vhodného mořského tmelu/lepidla po odstranění pružinových spon a černého těsnění pro optimální těsnost. Downlight má 3letou záruku.

Documentations

Type	Nom
	Installation Guide - Garmin Eclipse DL55 Downlight (EN)

Avis de l'expert

« Technical analysis of the Garmin ECLIPSE DL55 marine downlight »

The Garmin ECLIPSE DL55 is a relevant choice for onboard lighting, particularly for 12 V systems. Its white and RGB lighting versatility makes it adaptable to different ambiances, whether for functional or mood lighting. This downlight is especially suited to areas requiring enhanced waterproofing, such as cockpits or bathrooms, thanks to its IP68 rating. Note that it is not designed for prolonged immersion, making it suitable only for surface applications.

Installation is simplified by a two-wire setup. For indoor mounting, the supplied spring clips provide a quick solution. However, for outdoor installations or areas regularly exposed to water, using marine sealant is mandatory to ensure durability and waterproofing—remove the original clips and gasket before applying. This difference in mounting method is critical to ensure the product's longevity in a marine environment. Compatibility with the ECLIPSE Command Center unlocks more advanced control options via MFDs or smart devices, integrating with the Garmin navigation system. Without this command center, basic control via a simple switch remains functional for white and RGB cycling.

This model is an effective alternative to traditional monochrome lighting solutions, offering color flexibility without the installation complexity of more advanced lighting systems. It is ideal for owners seeking an aesthetic and functional lighting upgrade without a full electrical system overhaul. Its shallow flush-mount depth is a major advantage for installations in ceilings or thin bulkheads where space behind the surface is limited.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE DL55, stropní svítidlo bílé + RGB, černá povrchová úprava

3.388,30 CZK

3.388,30 CZK ~~3.740,48 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What lighting colors are available on the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight provides versatile LED lighting, combining white light (5000 K) and a full RGB color spectrum. This allows for creating various onboard lighting moods on your boat.

What is the luminous output and power consumption of the ECLIPSE DL55 downlight?

The DL55 downlight is equipped with four 3 W LEDs (one red, one green, one blue, and one white). It delivers an average luminous power of 4.8 W, with a maximum current draw of 0.4 A at 12 V. Typical current consumption is approximately 0.33 A at 12 volts.

Is the ECLIPSE DL55 downlight designed for indoor or outdoor use?

Yes, the ECLIPSE DL55 downlight is fully sealed and can be installed both indoors and outdoors. It is suitable for installation in wet areas but is not designed for continuous submersion in water.

What is the ingress protection (IP) rating of the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight has an IP68 protection rating. This ensures its resistance to demanding marine environments and allows installation in wet areas without risk of permanent submersion.

What are the manufacturing materials of the Garmin ECLIPSE DL55 downlight?

The DL55 downlight housing is constructed from durable anodized aluminum with a thermo-lacquered finish, and features a glass front. These materials ensure robustness suitable for marine environments.

What is the color temperature of the white lighting on the DL55?

The white lighting of the Garmin ECLIPSE DL55 downlight has a color temperature of 5000 K.

How is the RGB color cycle of the DL55 controlled?

When the DL55 downlight is turned on in white via a switch, toggling the switch will enter the color cycle. Another toggle will pause the cycle. To reset the downlight, simply turn it off for two seconds.

What are the required cut-out dimensions and depth for installing the DL55 downlight?

The DL55 downlight requires a cut-out diameter of 50.8 mm (2.00 inches) and has a shallow flush-mount profile of 21.2 mm (0.834 inches). It is recommended to cut the hole slightly undersized and fine-tune it with a file for a precise fit.

Can the ECLIPSE DL55 downlight be installed on a non-flat surface?

No, the ECLIPSE DL55 downlight must be mounted on a flat surface and not a curved one. The mounting surface must also be suitable for this type of luminaire.

How to install the DL55 downlight in interior areas?

For indoor installations, use the supplied spring clips. Gently pull the spring clips backward and insert the light fixture into the hole, releasing the spring clips once the fixture is in position.

How to install the DL55 downlight in outdoor or wet areas?

For outdoor installations or in damp areas, it is recommended to secure the light fixture using appropriate marine sealant/adhesive. Remove the spring clips and the black gasket from the fixture, then apply a small amount of adhesive around the glass bezel. Push the fixture into place while slightly rotating it to evenly spread the adhesive. Clean off any excess adhesive with a soft cloth, soap, and water, without using chemical cleaners.

What electrical precautions must be taken before installing the DL55 downlight?

Before any installation, always ensure that the boat's power source and battery are disconnected or isolated. Installation should be performed by a qualified professional. The DL55 downlight is designed to operate only with boats equipped with 12V DC systems, with an operating voltage range of 10 to 15V DC. Do not connect voltages outside this range or directly to an AC supply.

What is the recommended cable size for installing the DL55 downlight?

It is important to use a properly sized cable to ensure a voltage drop of less than 3% at the last fixture in the chain.

Can the ECLIPSE DL55 downlight heat up during operation?

Yes, the rear of the light fixture can become hot to the touch. The mounting surface must be suitable for this type of fixture installation.

With which electrical systems is the Garmin ECLIPSE DL55 downlight compatible?

The ECLIPSE DL55 downlight is specifically designed to operate with 12V DC boat electrical systems ONLY. Its operating voltage range is 10 to 15V DC.

Is the DL55 downlight compatible with light dimmers or third-party controllers?

No, the ECLIPSE DL55 downlight is not designed to be connected to third-party lighting control products or dimmers. It must be used with a simple On/Off switch or with the ECLIPSE Command Center control unit.

What control options are available for the ECLIPSE DL55 downlight?

The ECLIPSE DL55 downlight can be controlled in two ways: either with a simple On/Off switch, or with the ECLIPSE Command Center control unit for advanced features.

Can different types of downlights be mixed on the same Command Center output zone?

No, monochrome and bicolor downlights must not be added to the same output zone of the ECLIPSE Command Center control unit. A separate output zone must be used for each type of luminaire.

What is the warranty duration for the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight is covered by a three-year warranty from the original purchase date, covering manufacturing defects.

What conditions may void the Garmin ECLIPSE DL55 downlight warranty?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with all installation, maintenance, and usage guidelines in the document also voids the warranty.