ECLIPSE SNL100, Neon Flex Light, 5M - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 11%

Garmin

010-04536-00

ECLIPSE SNL100, NeonFlex pás, 5 m

Le Garmin ECLIPSE SNL100 est une solution d'éclairage LED néon flexible de 5 mètres, offrant une illumination continue sans points pour les applications marines intérieures et extérieures. Étanche IP68 et compatible 12V DC, il se distingue par sa flexibilité et sa capacité à être coupé sur mesure. Les clips de fixation en acier inoxydable et le kit de scellement sont inclus pour une installation personnalisée.

Prix publicBénéficier du tarif pro

6.205,03 CZK

6.205,03 CZK ~~6.982,61 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Ruban lumineux
Typická spotřeba elektrické energie	25
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Otočný paprsek	Non
Bend Direction	Latérale
Barva / povrchová úprava	Translucide
Cuttable Length Increments Mm	25
Výška	22
Typ instalace	Montage en surface
Integrovaný spínač	Non
Length M	5
Minimum Bend Radius Mm	120
Rozsah provozního napětí	10-15
Power Consumption Typical Per Meter	5 W/m
Typ napájení	DC
Odolnost vůči UV	Oui
Water Submersion Rating	Immersion temporaire
Šířka	16

Description détaillée

Garmin ECLIPSE SNL100 je řešení LED osvětlení typu neonového pásu navržené pro námořní prostředí. Nabízeno zde v délce 5 metrů, tento pás, známý také jako Lumishore ECLIPSE SNL100, poskytuje nepřetržité osvětlení bez viditelných bodů, vhodné pro instalace uvnitř i vně lodí.

Konstrukce a technické parametry

Díky konstrukci "bend-flex" lze SNL100 přizpůsobit zakřiveným povrchům, jako jsou okraje paluby, stropy kajut nebo T-topy, s minimálním poloměrem ohybu 120 mm na vertikální ose. Je důležité dbát na to, aby nebyl zkroucen nebo ohnut na horizontální ose, aby byla zachována jeho integrita. Tento osvětlovací systém je napájen 12V DC, přičemž pracuje v rozsahu 10 až 15V DC, s příkonem přibližně 5 W na metr a kanál. Je certifikován stupněm krytí IP68, což zajišťuje úplnou ochranu proti prachu a dočasnému ponoření, i když není určen pro trvalé ponoření.

Instalace a integrace

Instalace Garmin ECLIPSE SNL100 se provádí pomocí dodávaných nerezových svorek, doporučených každých 300 mm. Specifickým rysem je možnost řezání na přesné délky po 25 mm, přičemž konce řezu je nutné pečlivě utěsnit dodaným kitem. Monochromatické (modré nebo bílé) a dvoubarevné (modré a bílé) verze obsahují 60 LED na metr, zatímco RGB verze má 120 RGB LED na metr. Ovládání lze provádět prostřednictvím kompatibilního multifunkčního displeje, chytrého zařízení, okamžitého spínače nebo ECLIPSE Command Center, přičemž poslední jmenovaný je nezbytný pro RGB modely. Produkt je kryt tříletou zárukou a je vyroben z UV odolného materiálu, i když se doporučuje vyhnout se přímému a dlouhodobému působení intenzivního slunečního záření.

Documentations

Type	Nom
	Installation Guide - ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Technical analysis: Garmin ECLIPSE SNL100 flexible neon lighting »

The Garmin ECLIPSE SNL100 light strip (also marketed under the Lumishore brand) is a decorative and functional lighting option particularly suitable for marine fittings. Its ability to provide continuous light, without the "dotted" effect of standard LED strips, is a major aesthetic advantage for visible applications such as indirect lighting of sidewalks, handrails, or accentuating hull lines. The product's flexibility, with a 120 mm bending radius, allows for neat integration even on complex surfaces where rigid profiles would be unsuitable. This feature sets it apart from more traditional linear lighting solutions.

For installation, it is essential to follow the manufacturer's recommendations, particularly regarding bending only along the vertical axis and using two people for long sections to avoid damaging the internal LED strip. The ability to cut the strip in 25 mm increments offers great flexibility for precise adjustment to the chosen location, but requires rigorous sealing of the cut end to maintain IP68 waterproofing. Although the product is robust and UV-resistant, like all exposed lighting, installing it in areas shielded from direct and intense sunlight will extend its lifespan. The 12V DC compatibility makes it easy to integrate into most onboard electrical systems, and the option to control it via the ECLIPSE Command Center for RGB versions makes it a component of a larger, manageable lighting system.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, NeonFlex pás, 5 m

6.205,03 CZK

6.205,03 CZK ~~6.982,61 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE SNL100 Neon Flex Light?

The Garmin ECLIPSE SNL100 is a flexible LED neon-style lighting solution specifically designed for marine environments. It provides continuous and uniform illumination without visible light points, making it ideal for indoor and outdoor installations on vessels.

What is the length of this LED strip?

This Garmin ECLIPSE SNL100 light strip model has a length of 5 meters.

Is the LED light strip waterproof and suitable for use in humid environments?

Yes, the Garmin ECLIPSE SNL100 is IP68 certified, meaning it is fully protected against dust and can withstand temporary immersion in water. It is suitable for installation in damp areas, both inside and outside the boat. However, it is not designed for permanent submersion.

Can the light strip be cut to the desired length?

Yes, the Neon Flex can be cut to specific lengths. It is important to cut it only at the marked cut points, in 25 mm increments. After cutting, the new ends must be sealed using the provided sealing kit to maintain the product's integrity and waterproofing.

What is the power consumption of the Garmin ECLIPSE SNL100?

The Garmin ECLIPSE SNL100 has an electrical consumption of approximately 5 Watts per meter and per channel.

Does the ribbon emit a uniform light or visible light spots?

The Garmin ECLIPSE SNL100 is designed to provide continuous illumination without visible light points, creating a smooth neon-like and aesthetic effect.

How to install the Garmin ECLIPSE SNL100 on my boat?

The Garmin ECLIPSE SNL100 is installed using stainless steel clips (supplied), which should be secured every 300 mm. Before installation, disconnect or isolate the boat's power source. Carefully unroll the tape and allow it to relax for approximately one hour before positioning.

Is it possible to bend the LED strip to fit curved surfaces on the boat?

Yes, the "bend-flex" design of the SNL100 allows it to be adapted to curved surfaces. It can be bent along the vertical axis with a minimum bending radius of 120 mm. However, it is crucial not to twist or bend it along the horizontal axis to preserve its integrity and functionality.

Where can the SNL100 be installed on a boat?

The SNL100 can be installed inside or outside the boat, including in wet areas such as coamings, cabin ceilings, or T-tops. Although it is made from UV-resistant material, it is recommended not to install it in areas exposed to direct sunlight to optimize its lifespan.

Is a professional required for electrical and mechanical installation?

It is strongly recommended that a qualified professional handle the electrical and mechanical installation of the Garmin ECLIPSE SNL100 to ensure proper and safe installation.

What precautions should I take when handling the Neon Flex?

Always unroll the Neon Flex carefully along its entire length; do not lift it by one end only. Do not let the tape fall or twist during installation. Do not apply excessive pressure, as this could damage the internal LED strip. Do not pull, stretch, twist, or bend the Neon Flex on the vertical axis (only on the horizontal axis with the specified bending radius). For lengths over 1 meter, it is recommended to use two people for installation. Always lay the Neon Flex flat and in a straight line; do not allow it to bend, twist, or bunch up.

How to seal the ends after cutting the LED strip?

After cutting the Neon Flex at a marked cut point, use the provided sealing kit. To prevent the sealant from covering the LEDs and causing discoloration, it is important to rewind the Neon Flex onto its reel with the cut points facing outward. This retracts the printed circuit board (PCB) into the extrusion, allowing for effective and clean sealing.

What is the required supply voltage for the SNL100?

The Garmin ECLIPSE SNL100 is designed to operate only on 12V DC systems. It can function within a voltage range of 10 to 15 Volts DC. Do not connect it to voltages outside this range or directly to an alternating current (AC) source.

Is the SNL100 compatible with Garmin ECLIPSE Command Center lighting control systems?

Yes, the Garmin ECLIPSE SNL100 is compatible with ECLIPSE Command Center lighting control systems. For RGB versions of Neon Flex, using an ECLIPSE Command Center and optional expansion modules is mandatory for proper operation and color control.

Can I connect different types of Neon Flex (monochrome, bicolor, RGB) to the same zone on the ECLIPSE Command Center?

No, it is important not to add monochrome, bicolor, and RGB lighting on the same zone output of the ECLIPSE Command Center. Use a separate zone output for each type of Neon Flex to ensure correct operation.

Is it possible to connect the blue and white channels of a bicolor model simultaneously?

No, it is important not to wire the blue and white channels of a bicolor model to light up simultaneously. The wiring diagram for bicolor versions is designed for separate color control.

Can the ribbon cable be connected directly to an AC power supply?

No, the Garmin ECLIPSE SNL100 is designed to operate only with a 12V DC power supply. It must never be connected directly to an alternating current (AC) source.

What components are included for the installation of Neon Flex?

The Garmin ECLIPSE SNL100 comes with stainless steel clips for mounting. If you cut the tape to a custom length, a sealing kit is also included to protect the cut ends.

Is the LED light strip UV-resistant?

Yes, the Neon Flex is made from a UV-resistant material. However, to optimize its durability and performance, it is recommended not to install it in areas exposed to strong and prolonged direct sunlight.