ECLIPSE Strip Lt SL100-Blue-White 2.5m, LS, (60-0489-2500) - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 13%

Garmin

010-04484-00

ECLIPSE Strip Lt SL100-modrá-bílá 2,5 m, LS, (60-0489-2500)

Conçu pour l'éclairage marin discret, le Garmin ECLIPSE Strip Light SL100 est un ruban LED flexible bicolore (bleu et blanc 5000K) de 2.5 mètres, offrant une protection IP68. Recoupable et résistant aux UV, il s'intègre facilement pour un éclairage d'ambiance ou fonctionnel. Il est livré avec un kit d'étanchéité (silicone, embouts) et des clips de fixation.

Prix publicBénéficier du tarif pro

2.054,00 CZK

2.054,00 CZK ~~2.368,84 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Ruban LED marin
Provozní napětí	10-15 VDC
Typická spotřeba elektrické energie	12.5
Barva světla	Bleu, Blanc
Stupeň krytí IP	IP68
Délka pásku	2.5
Hustota LED / metr	60.0
Lepící podklad	Oui
Bend Axis Restriction	Vertical uniquement
Cuttable	Oui
Direct Sunlight Exposure Restriction	Oui
Min Bend Radius Vertical Mm	50
Mounting Clips Included	Oui
Doporučena profesionální instalace	Oui
Sealing Kit Included	Oui
Strip Height Mm	5.2
Šířka pásku	12.0
Submersion Resistance	Non

Description détaillée

Navržen pro diskrétní a funkční osvětlení na moři, Garmin ECLIPSE Strip Light SL100 dvoubarevný pás o délce 2,5 metru (referenční číslo 010-04484-00) je flexibilní a robustní řešení. Tento LED pásek obsahuje 60 diod na metr, které poskytují současné nebo samostatné osvětlení v modré a bílé barvě (5000K). Jeho krytí IP68 zaručuje úplnou odolnost proti vodě a prachu, což ho činí vhodným pro instalace jak uvnitř, tak venku, včetně vlhkých prostor, i když není určen pro trvalé ponoření.

Technické specifikace a flexibilita instalace

Model SL100 pracuje s napětím 10 až 15 VDC, specificky pro 12V systémy na lodích, přičemž typická spotřeba je přibližně 5 wattů na metr na kanál (tedy 0,41 A při 12 V). Jeho konstrukce z UV odolného materiálu a plné zalití zajišťuje trvanlivost v námořním prostředí. S průřezem 10,8 mm x 5,2 mm umožňuje diskrétní integraci. Lze jej stříhat na vyznačených místech pro přesné přizpůsobení délky a konce jsou utěsněny pomocí dodaného kitu (silikon a koncovky). Montáž se provádí pomocí předem nanesené 3M lepicí pásky, doplněné o dodané šroubovací spony pro pevnější uchycení, což je zvláště doporučeno pro venkovní instalace nebo oblasti vystavené vibracím. Pásek má minimální poloměr ohybu 50 mm na svislé ose, čímž se zabrání jakémukoli zkroucení nebo ohybu na vodorovné ose.

Možnosti ovládání a pozice v sortimentu

Ovládání Garmin ECLIPSE Strip Light SL100 dvoubarevného pásku lze provádět pomocí jednoduchého vypínače zapnuto/vypnuto/zapnuto, který umožňuje přepínání mezi modrou a bílou barvou (je důležité nezapojovat oba kanály tak, aby se rozsvítily současně pomocí přímého vypínače). Pro pokročilejší řízení je kompatibilní s volitelným ECLIPSE Command Center, které umožňuje ovládání prostřednictvím multifunkčních displejů (MFD) Garmin nebo chytrých zařízení. Tato všestrannost jej řadí mezi střední řešení osvětlení v řadě Lumishore/Garmin, která nabízejí více funkcí než základní monochromatické modely, aniž by byly tak složitá jako systémy RGB, které vyžadují bezpodmínečně Command Center. Je ideální pro osvětlení podél okrajů palub, v úložných prostorech nebo pod palubními prvky kokpitu.

Documentations

Type	Nom
	Installation Manual - Eclipse SL100 Strip Light Installation Guide (EN)

Avis de l'expert

« Flexible marine lighting Garmin ECLIPSE SL100: versatility and discretion »

The Garmin ECLIPSE Strip Light SL100 LED strip is a relevant solution for integrating ambient or courtesy lighting on recreational boats of all sizes. Its flexible design allows it to follow the contours of the boat, offering discreet lighting that rigid fixtures struggle to match. The blue/white dual-color option is a plus, with blue often preferred for night navigation or subdued ambiance, and white for functional lighting. This duality enables adapting the lighting without requiring a more complex and costly RGB system.

In terms of installation, the ability to be cut to size is a major advantage, allowing precise length customization. It is crucial to respect the marked cut points and to carefully seal the ends with the provided kit to maintain the IP68 rating of the product. Using both the adhesive and mounting clips is highly recommended, especially in areas exposed to vibrations or constant moisture. While direct connection via a switch is possible for both colors, integrating the strip with an ECLIPSE Command Center provides a superior user experience through Garmin MFDs, enabling centralized control and more advanced lighting scenarios. It is imperative not to bend the strip along the horizontal axis to avoid damaging internal circuits and to ensure the boat's electrical system is 12V DC.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE Strip Lt SL100-modrá-bílá 2,5 m, LS, (60-0489-2500)

2.054,00 CZK

2.054,00 CZK ~~2.368,84 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of this Garmin ECLIPSE LED strip?

This Garmin ECLIPSE SL100 LED strip is supplied in a 2.5-metre length.

What lighting colors are available for this LED strip?

This specific model of the ECLIPSE SL100 LED light strip provides dual-color lighting, in blue and white (5000K). It allows simultaneous or separate illumination of these two colors.

Is this LED light strip waterproof and dustproof?

Yes, the Garmin ECLIPSE SL100 LED light strip has an IP68 protection rating. This means it is fully water- and dust-resistant, making it suitable for both indoor and outdoor installations, including wet areas. However, it is not designed for permanent submersion.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 LED strip is designed to operate with 12V boat systems only. It can function within a DC voltage range of 10 to 15 Volts. It must not be connected to voltages outside this range or directly to an AC voltage.

Can I cut the LED strip to a shorter length?

Yes, the LED light strip can be cut at marked points to fit the desired length precisely. A kit is provided to seal the cut ends.

How to seal the ends of the LED strip after cutting it?

To seal a cut end, first remove about 20 mm of the adhesive backing and lightly score the adhesive 10 mm from the end. Then peel the tape from the score line to expose the silicone. Half-fill the end cap with the supplied silicone adhesive, then fit the cap and wipe off excess adhesive. Allow 24 hours to cure before handling.

What is the power consumption of this LED strip light?

The typical power consumption of this LED strip is about 5 watts per meter and per channel. The typical current draw is 0.41 ampere at 12V per channel.

How is the light strip mounted on the surface?

Installation is primarily done using a 3M adhesive pre-applied on the tape. For reinforced fixation, particularly recommended for outdoor installations or wet areas, screws and clips are also included.

What precautions should I take when installing the LED light strip?

Before installation, ensure the vessel's power source and battery are disconnected or isolated. It is recommended not to install the strip in areas exposed to direct strong sunlight. Do not bend the strip along the horizontal axis or twist it. For lengths over one meter, installation by two people is advised. Do not apply pressure on the LEDs, only on the edges of the strip.

Can the ribbon be bent to fit curves?

Yes, the tape has a minimum bending radius of 50 mm (1.968 in) on the vertical axis. It is important not to bend it on the horizontal axis or twist it.

Can both the blue and white channels of the LED strip be lit simultaneously?

No, it is important not to wire the blue and white channels so that they light up simultaneously. The strip is designed for simultaneous or separate illumination, but the wiring must be done in a way that does not activate both channels at the same time via a single simple switch.

Is it necessary to use mechanical fasteners for outdoor installation?

Yes, for outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fastenings (screw clips) in addition to the adhesive layer. These fastenings should be spaced 250 to 300 mm apart and/or placed on either side of a bend, avoiding alignment with the LEDs.

What is the durability of the LED light strip in a marine environment?

The LED strip is made from UV-resistant material and is fully encapsulated, ensuring good durability in the marine environment. Its IP68 rating also contributes to its robustness against water and dust.

Is the LED light strip compatible with an ECLIPSE Command Center?

Yes, this two-tone LED strip can be controlled by an ECLIPSE Command Center. Specific wiring diagrams are provided for this setup. It is important to consult the Command Center installation manual for complete instructions and note that single-color, two-tone, and RGB lights must not be added to the same zone output.

What are the width and thickness of the light strip?

The light strip section is 10.8 mm wide by 5.2 mm thick, allowing for discreet integration.

How long should the 3M adhesive be left to cure before using the tape?

It is recommended to let the 3M adhesive cure for 24 hours before turning on the LED strip to ensure optimal adhesion.

How to prepare the mounting surface before adhesive installation?

Before applying 3M adhesive, the mounting surface must be thoroughly cleaned with isopropyl alcohol (IPA) to ensure it is free of dust and dirt.

Is the LED light strip designed to be installed by a professional?

A qualified professional should perform the electrical and mechanical installation to ensure correct and safe installation.

Which type of boat electrical system is compatible with this LED strip?

This LED strip is specifically designed to operate with 12V boat systems. It is compatible with direct current (DC) voltages ranging from 10 to 15 volts.