Sada GPSMAP® 923xsv 9" + radom GMR™ 18 HD3

The Garmin GPSMAP 923xsv is an advanced multifunction chartplotter designed for modern marine navigation. It offers superior video integration, enabling monitoring via third-party and Garmin network cameras, including FLIR M and MD models. This unit supports simultaneous display of multiple video streams and provides intuitive touchscreen control of cameras. It also includes fishfinder features (indicated by "xsv") and extended network connectivity to integrate various marine equipment.

This pack includes the GMR™ 18 HD3 radome. It is an 18-inch high-definition radar that provides clear and precise detection of targets, enhancing safety and situational awareness at sea, whether for navigation, weather detection, or monitoring other vessels.

Yes, the GPSMAP 923xsv is compatible with third-party network cameras and FLIR marine cameras, including the M and MD series. To connect standard Ethernet devices such as network cameras or switches to the Garmin marine network, the use of a Garmin PoE isolation coupler (part number 010-10580-10) is mandatory to protect the chartplotter. FLIR cameras are typically detected automatically by the network without prior configuration.

To connect a standard Ethernet device, such as a network camera, to a Garmin marine network, you must use a Garmin PoE isolation coupler (part number 010-10580-10). This coupler protects your chartplotter from potential damage. It is also recommended to use a shielded cable, such as a CAT 5e F/FTP, for optimal performance and better protection of your equipment.

The GPSMAP 923xsv provides intuitive touch control of cameras connected to the Garmin marine network. Users can employ touch gestures such as pinching to zoom and swiping to pan and tilt the camera. It is also possible to customize and store position and zoom presets for each camera directly from the chartplotter screen.

To use camera tracking functions such as Compass Lock, Vessel Lock, or AIS/MARPA target tracking, specific sensors must be connected to the chartplotter via the Garmin marine network or the NMEA 2000 network.

For Compass Lock and Vessel Lock: a marine camera compatible with tracking (e.g., a newer FLIR IP video camera), a GPS antenna, and a heading sensor (ideally with 9-axis data including yaw, pitch, and roll). For AIS tracking: an AIS receiver in addition to the above equipment. For MARPA tracking: a compatible radar device in addition to the above equipment.

Yes, a GPSMAP 7x3/9x3/12x3 mounting bracket is available. It is designed to convert an existing dashboard cutout for a GPSMAP 7x2/9x2/12x2 chartplotter to allow installation of a GPSMAP 7x3/9x3/12x3. This makes upgrading easier without requiring major modifications to the dashboard cutout.