Kabel antény pro VHF, AIS a plottery

The Garmin 010-11454-00 antenna cable is 32 feet long, which is approximately 9.75 meters.

This cable is designed to establish a reliable and dedicated connection between your marine antenna and various Garmin electronic devices, including VHF radios, AIS systems, and chartplotters.

Yes, the antenna cable 010-11454-00 is a Garmin OEM part, ensuring optimal integration and performance within your system.

This antenna cable is fitted with BNC-BNC connectors, suitable for a wide range of compatible Garmin equipment.

As an original Garmin marine-grade equipment cable, this is designed for marine environments, ensuring a reliable and durable connection aboard your boat.

The product reference for this antenna cable is 010-11454-00.

Yes, this cable is specifically designed for a direct and dedicated connection between the antenna and the main device, unlike other interconnect cables that may be used with splitters.

This cable is compatible with Garmin VHF radios, AIS systems, and Garmin chartplotters that use BNC connectors.

Yes, this cable is specifically designed for devices such as the GA™ 38 GPS/GLONASS antenna to establish a reliable connection.

Yes, cable 010-11454-00 is compatible with the Garmin AIS™ 600 blackbox AIS transponder.

No, this cable is different from the shorter VHF interconnect cables designed for antenna sharing with AIS 800 or AIS 300/600 via an internal splitter. It is designed for a direct and dedicated connection.

No, this cable differs from the specific Cortex® V1 and M1 cables by its BNC-to-BNC connectors, which are suited for a different range of Garmin equipment.

Although the cable uses standard BNC connectors, it is specifically designed as Garmin original equipment to ensure optimal performance and integration with Garmin devices. Compatibility with equipment from other brands is not guaranteed and is not the intended use.

This cable is compatible with Garmin VHF radios that use BNC connectors for the antenna. It is recommended to check the specifications of your Garmin VHF radio model to confirm connector compatibility.

Yes, this cable is compatible with Garmin chartplotters and GPS/GLONASS antennas such as the GA™ 38, to establish a reliable and dedicated connection.

During installation, route the cable to avoid electromagnetic interference, tight bends, and areas where it could be physically damaged. Ensure BNC connections are tight for optimal signal performance.

It is strongly advised not to cut or modify the length of this antenna cable. Any alteration could affect the cable's impedance and degrade signal quality, thereby reducing the performance of your VHF, AIS, or GPS equipment.

No, the BNC connectors of this cable are designed to be screwed or clipped manually onto the corresponding ports of Garmin devices. No special tool is generally required for the connection.

For connections exposed to the elements, it is recommended to use marine-grade sealing products, such as self-amalgamating tape or heat-shrink tubing, around BNC connectors once they are properly tightened, to protect against moisture and corrosion.

Yes, given its length of 9.75 meters, the cable can be routed through existing conduits or cable passages on your boat. Ensure the conduits are wide enough and free of sharp edges to prevent cable damage during installation.